Providing additional 500 KVA Diesel Generator set in BSL-3 facility in the University of Hyderabad campus

Amount

1) The estimated amount is exclusive of GST. 2) The Bidder should quote basic rates exclusive of GST and quote GST percentage separately. GST should be revised from time to time.

Supply, installation, testing and commissioning of 500 KVA, 415 v, 3 PH, 0.8 PF,50 HZ, diesel Generating set developing minimum 587 BHP @ 1500 RPM Liquid cooled, electric start coupled with alternator mounted on a common base frame with standard control panel and accessories complete in all respects with CPCB-4 approved Acoustic Enclosure complete with: a. Fuel tank b. battery & Leads c. Residential -Silencer d. AVM pads e. First fill of lube oil f. Acoustic Enclosure G. standard control panel H. Load side Terminal Box Make: Cummins/ Kirloskar/caterpillar

Supply, installation,testing and commissioning of Outdoor type AMF panel with Fully Compartmentalized, made of 2/1.6mm thick CRCA Sheet, Powder Coated after Seven Tank Process of Shade Siemens Grey. 1. 800A TP EDO ACB with O/L, S/C, E/F withMicroprocessor Based Protection Release (PR121)+U/V Release+NCT - 1 Nos, make:C&S,Legrand. 2. 150A TP Power Contactor, AC3 Duty (LC1FDP150A) WITH 2NO+2NC add on block - 1 Nos, make: C&S,Legrand. 3. Indicating Light Red,24V DC-2 Nos, 4. Indicating Light Red,230V AC-1 Nos, 5. Indicating Light Green,230V AC- 1 Nos, 6. Sel. Sw.1P, On/OFF, 6A (22.5 DIA)- 1 Nos, 7. Emergency Stop Push Button (RED)- 1 Nos, 8. 6A SP MCB,10KA- 8 Nos, 9. 10A SP MCB,10KA-2 Nos, 10. 6A DP MCB,10KA- 4 Nos, 11.16A DP MCB,10KA- 4 Nos, 12.Breaker Control Switch,25A- 1 Nos, 13. Auto/ Manual Sel. Switch 2P, 2way + off,6A-1 Nos, 14. Cranking Relay, 2 C/O, 24V DC-1 Nos, 15. Hooter, 96Sq.mm., Electronic Type, 24V DC- 1 Nos, 16. 4W, Annunciator with T/A/R push button, 17. Voltage Monitoring Relay, 415V AC- 1 Nos, 18. Aux Relay, 2C/O, 230V AC- 1 Nos, 19. Aux Relay, 4C/O, 230V AC- 1 Nos, 20. Aux Relay, 2C/O, 24V DC- - 4 Nos, 21. Aux Relay, 4C/O, 24V DC- 4 Nos, 22.ON Delay Timer, Coil Voltage 230V AC,0-180SEC,Electronic- 2 Nos, 23. Automatic Battery Charger, I/P-230V AC, O/P-24VDC,12A- 1 Nos 24. Auxiliary contactors 230V AC - 4Nos. 25. Timers 230V - 4 Nos. 26. 24 V DC PLA Relays-4 Nos 27.Terminal- 1 set. suitable interlocking with old existing AMF panel.

Supply of 3.5 corex 300 sqmm LT 1.1KV grade PVC insulated Aluminium Armoured cable. Make: Polycab/finolex/Gloster

Supply of 8 corex2.5 sqmm LT 1.1KV grade PVC insulated screened copper Armoured cable. Make: Polycab/finolex/Gloster

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 300 sq. mm (70mm)

Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Providing and laying in position cement concrete 1:3:6 (1cement : 2 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.(7x2.6x1 + 2x2x2)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on New work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

LEO ENTERPRISES

CHARAN ELECTRICALS