NIQ-22-(EL) Sl-03 of 2022-2023

Amount

Supply of Solar High Mast, with 2 Day Autonomy, having 4 Luminaries of 80W each with Colour Temperature of 3000K. 10 Meter GI High mast, designed to sustain a wind speed of 180 KM/hr, with 4Pcs of 80W Led fixture enclosed in Pressure die cast Aluminium Housing, powder coated in silver grey and with Toughened glass, The 320W of Light will be backed up and powered by More than 3000 Wh of Lithium Ferrous Phosphate Based Battery Backup and the system will be charged by 1000Wp of Solar PolyCrystalline PV Modules. (330Wp X 4 Modules) 10 Meter Polygonal Pole, GI with necessary mounting arrangement for Solar PV Module & Light Fittings Mounting arrangement should be such that it is easy to maintain 4 Units of 80W LED Light with secondary Lens, in Aluminium Die Casting, IP66 Protection, Auto Switching Dask to Dawn, Led Driver cum charge controller should be equipped withthe following features, MPPT based charge controller with Three stage battery charge monitoring algorithm, Greater than 90 percent efficiency, Short Circuit Protection, Battery Over- charge Protection, Battery Deep Discharge Protection, PV Reverse Voltage Polarity Protection, Battery Reverse Voltage Polarity Protection, Software Watch-dog for LED Over-current Protection, (Zero Dark Spot at ground level) 4 Units of 60Ah LiFePO4 Battery BIS approved, with easily replaceable mounting and wiring arrangement 4 Units of 330Wp in 24V Voc Solar PV Modules Polycrystalline with RFID Tag All wirings with the modules should be made using 4Sqmm Solar cables, the connection with the Modules to be made using MC4 Connectors. System must have an inbuilt Remote Monitoring System, integrated with MPPT charge controller and it would record the parameters at a fixed interval of 10 Minutes, Recorded data should be available in the PDF, XLS, JPED, PNG& SVG Format with the Data logging of the following parameters 1. Battery: Voltage/Current/Power 2. Solar PV Module: Voltage/Current/Power 3. Load: ON-Off Status/Voltage/Current/Power 4. Fault description 5. Site Co-ordinates Make SOLARIZE (SOLHM80WX4WL4P)or equivalent as approved by EIC.

Supply of Solar High Mast, with 2 Day Autonomy, having 4 Luminaries of 52W each with Colour Temperature of 3000K. 10 Meter GI High mast, designed to sustain a wind speed of 180 KM/hr, with 4Pcs of 52W Led fixture enclosed in Pressure die cast Aluminium Housing, powder coated in silver grey and with Toughened glass, The 208W of Light will be backed up and powered by More than 2150 Wh of Lithium Ferrous Phosphate Based Battery Backup and the system will be charged by 660Wp of Solar Poly-Crystalline PV Modules. (330Wp X 2 Modules) 10 Meter Polygonal Pole, GI with necessary mounting arrangement for Solar PV Module & Light Fittings Mounting arrangement should be such that it is easy to maintain 4 Units of 52W LED Light with secondary Lens, in Aluminium Die Casting, IP66 Protection, Auto Switching Dask to Dawn, Led Driver cum charge controller should be equipped with the following features, MPPT based charge controller with Three stage battery charge monitoring algorithm, Greater than 90 percent efficiency, Short Circuit Protection, Battery Over- charge Protection, Battery Deep Discharge Protection, PV Reverse Voltage Polarity Protection, Battery Reverse Voltage Polarity Protection, Software Watch-dog for LED Over-current Protection, (Zero Dark Spot at ground level) 4 Units of 42Ah LiFePO4 Battery BIS approved, with easily replaceable mounting and wiring arrangement 2 Units of 330Wp in 24V Voc Solar PV Modules Polycrystalline with RFID Tag All wirings with the modules should be made using 4Sqmm Solar cables, the connection with the Modules to be made using MC4 Connectors. System must have an inbuilt Remote Monitoring System, integrated with MPPT charge controller and it would record the parameters at a fixed interval of 10 Minutes, Recorded data should be available in the PDF, XLS, JPED, PNG& SVG Format with the Data logging of the following parameters 1. Battery: Voltage/Current/Power 2. Solar PV Module: Voltage/Current/Power 3. Load: ON-Off Status/Voltage/Current/Power 4. Fault description 5. Site Co-ordinates Make SOLARIZE (SOLHM52WX4WL2P) or Equivalent as approved by EIC

UNIQUES

LAXMI ENTERPRISE