Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC AT BRAJARAJPUR PO INS CHILKA DISTT KHORDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹19.3 L+₹69,487.50 (3.73%)Rejected-Finance AT DUNGAMAL NH 5 PO INS CHILKA DISTT KHORDHA ODISHA 752030 | KHORDHA | ODISHA | 752030 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹19.5 L+₹88,346.15 (4.74%)Rejected-Finance AT DUNGAMAL NH 5 PO INS CHILKA VIA BALUGAON DIST KHORDHA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹19.6 L+₹96,736.35 (5.19%)Rejected-Finance AT NUAGARH PO BARKUL DISTT KHURDHA ODISHA 752030 | KHORDHA | ODISHA | 752030 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹19.7 L+₹1.0 L (5.55%)Rejected-Finance AT BARIMAL PO HATIBARI PS SUKINDA DIST JAJPUR PIN 755018 | JAJAPUR | ODISHA | 755018 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹20.5 L
EMD Value
₹41,000
Closing Date
16 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER CHILKA
GARRISON ENGINEER CHILKA
ADDITION AND ALTERATION OF MT SECTION BUILDING NO P 76 WITH PROVISION OF MT DRIVER REST CUM SANITARY ANNEX AT INHS NIVARINI INS CHILKA UNDER GE CHILKA
2023_MES_620488_1
GE/CHL/8923 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE CHILKA, INS CHILKA, KHURDA, ODISHA 752 037
MES Enlisted contractor of Class E Category a(i)
7 documents required · 7 mandatory
₹500
Yes
GE CHILKA
₹41,000
Yes
18 Dec 2023
25 Sept 2023
18 Oct 2023
26 Sept 2023
16 Oct 2023
2 Oct 2023
26 Sept 2023 - 30 Sept 2023
Amount
Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100M and M&L for water proofing treatment to roof as per per manufacturer's instructions with the following specification:-. (a) 15 mm thick plastering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement including preperation of roof surfaces. (b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm (c) Applying evenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d) Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqm laid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm. (e) Applying evenly a coat of hot blown bitumen 85/ 25 grade @ 1.2 Kg per Sqm over water proofing membrane (f) Applying a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions (g) Testing for water tightness by water ponding at least 72 hours
Supply only water proofing compound.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil etc all complete
Excavating over areas in any type of soil, n exc 1.5 m deep and getting out etc all complete
M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.
M&L for RCC nominal mix Type B1 1:2:4 (12.5 mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for RCC nominal mix type B1 1:2:4 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc all complete.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc all complete.
Ditto, all as per above item but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc all complete.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc.
M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6 etc all complete.
M&L for providing, cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs incl necessary form work complete all as specified and as directed.
M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation etc all complete.
M&L for providing cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) in surface channels and drains complete all as specified and as directed.
M&L for RCC precast cover slab type B1 1:2:4 using 20 mm graded aggregate set in CM 1:4 etc incl necessary form work complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.
M&L for 100mm thick PCC 1:2:4 type B2 using 40mm graded stone aggregate as in floor finished even and smooth without using extra cement complete as in all as specified and directed.
M&L for 75mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as Sub base of flooring complete all as specified and directed
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, drain cover etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed.
M&L for preparing of surfaces of steel for painting of any description, over 10cm in width or girth, on new surface over a coat of primer of red oxide zinc and two coat of synthetic enamelled paint over it all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.
S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc. Including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles fixed over and including 15 mm thick screed in CM (1:4) complete all as specified and as directed
S&F Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting / dado tiles fixed over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick fixed over and including 20mm thick CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames) all as specified.
Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified.
S&F Powder coated of any colour anodized aluminum frame (minimum thickness of powder coating 50 micron) for door/windows/ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD
S&F anodised powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F anodised powder coated of any colour aluminium sliding window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium anodised fittings including locking arrangement and all accessories commplete all as specified and as directed. (Note : glass shall be measured seperatly.)
S&F 4.8mm glass frosted on one side, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pan all as specified and as directed. Make : Hindustan,Pilkinton glass works Ltd/Modiguard.
S&F 4.8 mm thickness of sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and as directed. Make : Hindustan,Pilkinton glass works Ltd/Modiguard.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed
S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and as directed.
S&F 2nd class hard wood, 35 mm thickness of plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with MS Square tube supplying & fixing in opening as per specification.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails M.S frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification.
S&F mediam weight, cold rolled mild steel butt hinges of 100mm size, complete all as specified and as directed.
S&F extruded aluminium alloy handles, 125mm long fabricated type, anodised all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed.
S&F 250 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed
M&L for preparation of new painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over coat of pink primer of approved shade complete all as specified and directed.
S&F reinforced concrete pipes 150mm bore of pipe, class NP3, laid and jointed complete with collars complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) bed to 150mm bore of drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested
S&F PVC (SWR) pipes single socketed in any length joint fixed with solvent to walls & floors 110 mm bore.
S&F PVC (SWR) pipes single socketed in any length joint fixed with solvent to walls & floors 75mm bore.
S&F 110 bore PVC (SWR) bends any radius complete all as specified and directed
S&F 110 bore PVC (SWR) bends with access door any radius complete all as specified and directed
S&F 75 bore PVC (SWR) bends any radius complete all as specified and directed
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed
S&F 20mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 15mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.
M & L for walling of randum rubble masonry uncoursed well bonded bedded and solidly hearted built in CM 1:4 complete all as specified and as directed.
M&L for flush pointing to to random rubble masonry, uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed.
Taking down plaster of any description on brick or stone walls, ceilings, fins, fascias, chajjas, parapets etc. (including tiles) raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and directed.
M & L for 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete curfaces mixed with water proofing compound 2% by weight of cement finished even and fairn and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately.
M&L for rendering 10mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6, including finishing even and fair without using extra cement complete all as specified and as directed.
M&L for 5 mm thick rendering in CM 1:3 on ceiling including finishing the surfaces even and smooth, without using extra cement etc complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coat white wash complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coat white wash complete all as specified and directed.
M&L for preparation of new plastered external wall surfaces of any description over 10 cm width/girth and including applying two coat of weather coat anti dust emulsion paint, exterior grade of approved shade over a coat of alkali guard anti efflorescence primer as per manufacturer's instruction complete all as specified and as directed.
M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coat of white wash on walls complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old plastered decorated surfaces of external wall by brooming down or steel wire bruching, scraping down smoke soot, moulds, moss and efflorescencent salts and trading oil and greasy spots of any description over 10 cm width/girth and including applying one coat of weather coat anti dust emulsion paint, exterior grade of approved shade as per manufacturer's instruction and also rewrite the bldg No as per existing font style and size with enamel paint of approved shade complete all as specified and as directed
S&F wash hand basin vitreous china white flat back of size 580 X 450mm with brackets, complete including 15 mm bore facny pillar tap CP fancy type complete all as specified and as directed.
S&F 32mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-60 gms) suitable for wash hand basin complete all as specified and as directed.
S&F 32 mm dia size PVC waste pipe with cup washers complete all as specified and as directed.
S&F water closet pedestal vitreous china white pattern (EWC) white including fixing bolts (excluding flushing cistern and flush pipe) including necessary connetion to trap and flushing pipe complete all as specified and directed.
S&F (EWC) plastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or CP hinging device complete all as specified and directed.
S&F 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
S&F PVC floor trap with grating including jointing with solvent cement to waste pipe 75 mm dia
S&F Swivel shower , 195mm long with bend of 45 degree with flange of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed.
S&F 15mm dia bore of pipe Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed with long shank and cup (concealed type), (Minimum weight 15mm-110gms/20mm- 112 gms) complete all as specified and directed.
S&F 15 mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). complete all as specified and directed.
S&F 15mm dia bore of pipe angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed.
S&F 1000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections etc complete all as specified and as directed. (Make : Sintex Rano (Lid shall be threaded closing system).
S&F 25mm dia bore of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.
S&F 25 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and as directed.
Returning filling incl spreading, levelling watering and well ramming in layers not.exce 25 CM all as specified and directed.
Removing excavated material, soil to a distance not exce 50M and depositing where directed at a level n.exe 1.50M above the existing point all as specified and directed.
S&F PVC soap tray fixing with screw in the wall as specified and as directed. Make : Prayag Cat No 195).
M&L for RCC precast cover slab type B1 1:2:4 using 20 mm graded aggregate set in CM 1:4 etc incl necessary form work complete all as specified
M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed.
Dismantling plain or corrugated fiber glass thickness , including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F 2mm thickness fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.
S&F semi perforated 12mm thick micro tegular edged GRG false ciling tiles at all height with GRG (Glass fibre reinforced gypsum) false ceiliing tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%,humidity resistance of 99% , NRCO 0.50 to 0.75 as per IS 8225 : 1987 , noncombustible as per BS 476 (Part-4) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides ) comprising of amin T runners of size 15x32mm of length 3000 mm , cross T of size 15x32 of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) ie 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shaped level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on priphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
S&F welded steel wire n exc 4 Kg/Sqm fabric supplied and fixed complete to wood or steel members complete all as specified and as directed.
M & L for 75mm thick PCC type C2 1:3:6 (40mm garade aggregate) as in plinth protection complete all as specified and directed by Engr-in-Charge
S&F Aluminium anodised powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed.
S&F 18 to 20 mm thick Granite stone in steps, jambs, pillars, window cills, cooking platform, office counter set etc. in cement morter (1:4) including pointing in white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite
Demolition of brick work/stone masonry built in cement mortar and removal of rubbish from site complete all as specified and directed.
M&L for point wiring with 1.5sqmm PVC insulated unsheathed multistranded copper cable of FRLS grade with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn through PVC conceled conduit not less than 20mm dia with pressed steel in concealed MS box duly including covered with 3 mm thick hylem sheets for mounting switches/Sockets, accessories such as spacers, saddles, junction boxes. For one light point controlled by one switch.
For one Ceiling/Exhaust Fan point controlled by one swtich
For one socket point 5 Amps on the independent board
For one socket point 5 Amps on same board
Ditto all as per above item but using 2.5 sq mm single core copper conductor cable of multistrand FRLS grade PVC insulated Unshethed 1100 volt grade for 16 Amps socket combination pt. including running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuety conductor along with wiring and connecting to common earth dolly for One 6 pin multi socket outlet, 16 Amps , independent all as specified and directed.
S & F Switch socket combination 5 in 1, 5 /15 A 5 in 1 flush type. complete all as specified and as directed. Make: Anchor/Havells.
S & F switch sockets combnation 2 in 1, 6 amps flush type complete all as specified and directed.
S & F ceiling rose 3 terminal PVC/polycarbonate isoloted body complete all as specified and directed.
S&F switch piano flush type single pole, one way 5 Amps 230 volt complete all as specified and directed.
Supply & fix LED light fitting 1 x 10 Watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as direected. Cat part no D531065 of .Make Wipro or its equivalent in philips/Crompton/ Bajaj
Supply & fix in replacement of 12 W, 240 Volt, 50 HZ LED recessed mounted glare free uniform illumination having THD<20%, Cool day light temp, with complete fitting all as specified and as directed. Cat part No LSDSMN-12W-CDL Make:- CG or its equivalent in
Supply & fix LED stret light made up of pressure dia cast aluminium housing with acrylic cover as diffuser with IP 66 protection 35 W complete with clamp bolts breacket all as specified and as directed.
S &F stepped type electronic fan regulator 230 volt suitable for 1200mm/1400 mm sweep celing fan including necessary electric connection complete all as specified and directed.(Make: Anchor or equivalent)
Supply and Fix Ceilling Fan white/Ivory in colour complete with blades, down rods and accessories, 230 V, 1200 mm Sweep,min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC)Make : Khaitan/Crompton Greaves/Usha
Supply and fix of exhaust Fans, steel body 300mm sweep with blades and frame and louvers, heavy duty, AC single phase, 230 volts including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as directed. Make :/Khaitan/Almonard/Crompton
S&F sub main wiring with 2 runs of 4 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn in concealed PVC conduit not less than 25mm dia and one run of PVC insulated unserviceable of 4sqmm as earth continuity conductor drawn in PVC Conduit with accessories complete NOTE: 3 runs of 4 Sqmm and 1 run of conduit will be measured as one unit i.e RM (ii) Cutting,chasing,pinning are also included in quoted rate.
S & F MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar 240 Volt, IP 43- Metal door. complete all as specified and as directed
S&F MCB SPN 40 Amp, 240 Volt C curve. complete all as specified and as directed. Make: Havells/Legrand/L&T.
S&F MCB SP 6 to 32 Amp, 240 Volt C curve complete all as specified and as directed. Make: Havells/Legrand/L&T.
M&L for Earthing complete with GI earth plate electronic 600 x 600x 6mm buried directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground level connected to GI earth lead 4 mm dia by means of nuts bolts washers etc made out of galvanized iron and GI wire connected to main switch/DB board including necessary excavation and earth work PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 3 of MES Schedule Part I.
UDAYA BHANU NAYAK
RCB CONSTRUCTION
SAHADEV PALAI
ANIL KUMAR BISWAL
ANTARYAMI PANDA AND COMPANY
PABITRA MOHAN PARIDA
HARI PALAI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .