SPL REPAIRS TO BUILDING NO P 41 NURSING OFFICER MESS OF MH FAIZABAD UNDER AGE B R I AT GE

Amount

Taking down chowkhats or frame (with shutter without taking off shutter from frame exc 1.5 sqm but n.exc 4 sqm each.) complete all as specified and directed by Eng-In-charge.

Taking down chowkhats or frame (with shutter without taking off shutter from frame n. exc 1.5 sqm each complete all as specified and directed by Eng-In-charge.

S&F 2nd class HW plain solid straight chowkhats and frame wrought framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Eng-In-charge. Make:- Sal, Mahua, Sarin.

S&F bands, straps, supports or stays for rain water, ventilating pipes, including bolts if required, hooks (stay), heavy, for large gates and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fast, wall ties, hooks for hanging fan, plain angle cleats for securing purlin to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles confirming to Fe-290 Gde-165, complete all as specified and directed by Eng-In-charge.

M&L cement concrete in cills, steps, seismic and other similar bands, plinth course, string courses, lacing courses, parapet and railing up to 60cm in height, copings , kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angle and throating, complete all as specified and directed by Eng-In-charge.

M&L for treating ends of posts,backs of chowkhats etc area tarred exc 0.1 sqm but n.exc 0.5 sqm each, complete all as specified and directed by Eng-In-charge.

M&L for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhat etc, area n.exc 0.1 sqm each, complete all as specified and directed by Eng-In-charge.

S&F butt hinges 50mm long extruded aluminium alloy with galvanised mild steel hinges pin,anodised and fixed type B-21, complete all as specified and directed by Eng-In-charge.

S&F 40mm thick flush shutters, solid core construction, with particle board core and ply wood face panels, commercial type on both sides with both face is covered with decorative face veneer with lipping frame to match, complete all as specified and directed by Eng-In-charge.

S&F for 35mm thick 2nd class Hard Wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc without sash bar edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of member of shutters as specified in SSR part-I (2009) section 8,clause 8.24 (a) supplied and fitted with chowkats complete all as specified and directed by Eng-In-charge.

S&F 100mm long butt hinges medium grade cold rollled mild steel, complete all as specified and directed by Eng-In-charge.

S&F Aluminium anodised barrel tower bolts 150 mm of extruded section, complete all as specified and directed by Eng-In-charge.

S&F 150 mm long aluminium handles cast type anodised,complete all as specified and directed by Eng-In-charge.

S&F Aluminium alloy anodised sliding door bolt 250mm long with hasp, staple and fixing clip of sheet cast or extruded sections and fixing bolts, complete all as specified and directed by Eng-In-charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing,complete all as specified and directed by Eng-In-charge.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supply anf fixing in the frame at site as per specification and drawing, complete all as specified and directed by Eng-In-charge.

M&L for preparation of new wood surface and applying two coat of synthetic enamel paint over a coat of pink primer on wood or plywood based surface of over 10cm width or girth, complete all as specified and directed by Eng-In-charge.

Demolition of concrete in ground floor and roof, pavings n.exc 15cm thickness including floor finishes like tiles if any of any description, removing rubbish off the premises, complete all as specified and directed by Eng-In-charge.

Dismantling of floor, wall tiles including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Eng-In-charge.

M&L 25mm thick PCC (1:2:4) type B-1 (20mm graded stone aggregate) as in top of floor, roof of any position, finishing the surface even and fair for floor and even and smooth for roof complete all as specified and directed by Eng-In-charge.

M&L screed bed or bedding layer of mortar (1:4) 15mm thick for laying floor finishes,complete all as specified and directed by Eng-In-charge.

M&L for rendering 10mm thick in CM 1:3 on verticle surfaces of wall for fixing of wall tiles, complete all as specified and directed by Eng-In-charge.

M&L for glazed ceremic coloured tiles in vertical surfaces 350mmx250mmx7mm/450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match , complete all as specified and directed by Eng-In-charge.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick (Square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by the Engr-in-Charge.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window/ventilator frame of size 90mmx30mmx1.20mm for three track nos of track with one or more rebates including jointing cleats for fixing etc, including taking down old one , complete all as specified and directed by Eng-In-charge.

S&F Powder coated of any colour (minimum thickness of powder coating 50 micron) anodised aluminium window,ventilator shutter of size 40mmx 20mm (three track window) slide type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc including taking down old one, complete all as specified and directed by Eng-In-charge. (Note:- (i) Three Nos of track to be provided. (ii) In two tracks, shutter with frosted glass and one track shutter with galvanisd mild steel wire cloth 0.63mm dia of wire. (iii) Thickness of aluminium section shall not be less than 1.00 mm).

S&F figured glass 4.0 mm thick (frosted glass), pin head type and glazing with oil putty in square exc 0.5 sqm in each pane for three track aluminium window, complete all as specified and directed by Eng-In-charge.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Eng-In-charge.

S&F anodised aluminium grills made out of anodised aluminium bar size 10mm thick and average width of aperture 80mmx70mm fixed width aluminium fillets of size 25mmx3mm, including 'T' frame, complete all as specified and directed by Eng-In-charge.

Taking down cement plaster any description, including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed by Eng-In-charge.

M&L for rendering 15m thick cement plaster on other than fair faces of brick work or concrete surfaces CM (1:6) finished even and smooth without using extra cement, complete all as specified and directed by Eng-In-charge.

M&L for rendering 15m thick cement plaster on fair faces of brick work or concrete surfaces in CM (1:4) finishing the surface even and smooth without using extra cement, complete all as specified and directed by Eng-In-charge.

M&L for 3mm thick wall care putty on wall surface, complete all as specified and directed by Eng-In-charge.

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash, complete all as specified and directed by Eng-In-charge.

M&L for preparation of new plastered surfaces of wall and applying two coats oil bound distemper over chalk whiting on plastered surfaces , complete all as specified and directed by Eng-In-charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint whiting complete all as specified and directed by Eng-In-charge.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper including roller mat finishing on wall surfaces, complete all as specified and directed by Eng-In-charge.

Taking up or down and connections, including cleaning for refixing or removal to store, steel tubing 15mm bore, complete all as specified and directed by Eng-In-charge.

Taking up or down, including cleaning for refixing or removal to store, steel tubing 20mm bore,complete all as specified and directed by Eng-In-charge.

M&L for galvanised steel tubes medium grade of 15mm bore, complete all as specified and directed by Eng-In-charge.

M&L for galvanised steel tubes medium grade of 20mm bore, complete all as specified and directed by Eng-In-charge.

Dismantling of water tank of capacity exc. 250 litre but n. exc. 500 litre, and removing from site, complete all as specified and directed by Eng-In-charge.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks three layers (cylindrical vertical with close top) hoisted and fixed in position all as specified in SSR Part-I (2009), complete all as specified and directed by Eng-In-charge.

S&F framed work such as grills, gratings etc with ends of bars shoulders and or riveted, or forged in to spikes; framed guard bars, barred iron doors, ladder, framed balusters, walk ways, railing framed work of water tank and similar works confirming to Fe 290 Gde-E- 165, complete all as specified and directed by Eng-In-charge.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets weight not exc. 4kg/Sqm, complete all as specified and directed by Eng-In-charge.

S&F expanded metal cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples complete steel members weight per sqm n.exc. 4 Kg complete all as specified and directed by Eng-In-charge.

S&F in repair pre laminated particle board ,18mm/19mm thick, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to nails for working table/storage almirah/kitchen shelf and cupboard shutters, complete all as specified and directed by Eng-In-charge.

S&F for mild steel shelf sliding track 25mm wide including knobs and handles, complete all as specified and directed by Eng-In-charge.

S&F for 30mm width of flaps continuous piano hinge mild steel, bright finished or electrogalvanised, complete all as specified and directed by Eng-In-charge.

S&F Hasp and staple 75mm , safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed by Eng-In-charge.

S&F brass knobs 35mm to 40mm dia, complete all as specified and directed by Eng-In-charge.

M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old work with one or more coats, complete all as specified and directed by Eng-In-charge.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), EWC white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Eng-In-charge.

S&F in repair for PVC valveless , syphonic action type , flushing cistern, (10 litres) capacity low level /high level white, with inlet, ball valve, float and handle including flush pipe, brackets, and connections to pipe and fixing of chain and pull, or lever, complete all as specified and directed by Eng-In-charge.

S&F fancy bib tap chromium plated, screwed for iron pipe or brass ferrule, 15 mm bore and fixed in repairs, complete all as specified and directed by Eng-In-charge.

S&F 15 mm bore stop valve / angular stop valve, chromium plated, fancy type, screwed for iron pipe or brass ferrule, and fixed, in repairs, complete all as specified and directed by Eng-In-charge.

S&F in repair Vitreous China wash basin, white, flat back, size 630mmx450mm with coupling excluding taps, waste, chain and plug and porcelain stopper but including brackets white incl 32mm/40mm dia 90cm long PVC waste down pipe and 32mm brass chromium plated waste coupling, complete all as specified and directed by Eng-In-charge..

S&F in repair aluminium alloy body door closer hydraulically regulated designation No-1 universal type suitable for door shutters up to 700mm in width and of weight not more than 35Kg, complete all as specified and directed by Eng-In-charge.

S&F 15 mm bore pillar tap, cast copper alloy with capstan heads chromium plated , fancy type , screwed for iron pipe or for brass ferrule , complete all as specified and directed by Eng-In-charge.

S&F in repair Brass chromium plated tubular towel rail with hook, 20 mm bore, D-type, 60 cm long between flanges, complete all as specified and directed by Eng-In-charge.

S&F in repairs glass shelf corner glass diplomat assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Eng-In-charge.

S&F in repair toilet paper holder coloured vitreous china box type, Fixed to wall with chrominium plated (CP) brass screw, complete all as specified and directed by Eng-In-charge.

S&F in repair soap dish vitreous china white approximate size 160mmx160mmx90mm any type fixed to plugs with chrominium plated brass screws complete all as specified and directed by Eng-In-charge.

S&F health faucet, chromium plated, fancy type, screwed for iron pipe or for brass ferrule, 15 mm bore fixed in repairs complete all as specified and directed by Eng-In-charge.

S&F in repair sink with drainage boards made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilevers and brackets and connecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmx160mm including waste coupling brass chromium plated 40mm and waste pipe, complete all as specified and directed by Eng-In-charge.

S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed by Eng-In-charge.

S&F in repair towel ring of PTMT fixed with and including chromium plated brass srewed on wooden or plastic cleats complete all as specified and directed by Eng-In-charge.

S&F in repairs, 75mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete as specified and directed.

S&F in repairs, PVC connection 15mm bore 450mm to 600mm long hexagonal brass chromium plated nuts and washers on both sides complete all as specified and directed by Eng-In-charge.

Demolition of breaking up drain pipes of 75mm and 110mm bore PVC (SWR), salt glazed ware, AC pipes set in cement morter or clamps in floor,wall etc complete all as specified and directed by Eng-In-charge.

S&F in repair 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed by Eng-In-charge.

S&F in repair 110mm bore PVC(SWR) bends , complete all as specified and directed by Eng-In-charge.

S&F 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to floor or in trenches, complete all as specified and directed by Eng-In-charge.

S&F 75mm bore PVC(SWR) bends , complete all as specified and directed by Eng-In-charge.

S&F 110mm bore PVC (SWR) junction single T equal or uneqal with access door, complete all as specified and directed by Eng-In-charge.

S&F 110mm bore PVC (SWR) junction double T equal or uneqal with access door,complete all as specified and directed by Eng-In-charge.

S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed by Eng-In-charge.

M&L for preparation of old wall surfaces and applying two coats of cement base paints on external wall surfaces, complete all as specified and directed by Eng-In-charge.

M&L for preparation of old surfaces applying two coats of Apex paint on projection surfaces of coloumn, facia , fin of chajja etc complete all as specified and directed by Eng-In-charge.

S&F 20mm/25mm bore ball valves brass high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwedfor iron pipe and fixed. complete all as specified and directed by Eng-In-charge.

S&F in repairs brass CP mixture 15mm bore for mixing hot and cold water screwed down for iron pipe and fixed, complete all as specified and directed by Eng-In-charge.

S&F in repair Continental Corner glass Shelf (unbreakable) with brackets and brass chromium plated guard bar, complete all as specified and directed by Eng-In-charge.

Taking down carefully copper/ aluminium point wiring (light, fan,call bell,two way, socket or power) complete along with fittings such as switches, ceiling roses, Pendants, regulators, tube fittings and other kits & fittings. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface/location all as specified.

M&L for point wiring for One light/Fan/Exhaust fan/Call bell point controlled by one way switch complete with FR PVC insulated and unsheathed cable 1.5 Sqmm (nominal area) 'ISI marked' multi stranded copper conductor single core drawn in and including 20 mm dia PVC conduit medium grade/MS conduit/PVC Capping casing concealed in wall/ Surface for fixing switch, socket and other accessories complete, PVC Box on surface / concealed 1.6/ 5mm thick terminel boxes 50 mm deep for mounting normal switches, fan regulator,etc of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including 1.5 Sqmm FR PVC insulated unsheathed copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified.

All as per item no. 85 but for One 5 pin 5 Amp switch socket out let point on an independent board including 1.5 Sqmm PVC insulated and unsheathed copper wire to common earth and connecting to earth dolly.

All as per item no. 85 but for One 5 pin 5 Amp switch socket out let point on same board including 1.5 Sqmm PVC insulated and unsheathed copper wire to common earth and connecting to earth dolly.

All as per item No. 85 here-in-before, but for 3&5 pin socket outlet 15 Amps, independent with 2.5Sqmm single core PVC insulated unsheathed 1100 Volts grade multi stranded copper conductor cable complete with 1.5 Sq mm PVC insulated earth wire green colour and connecting to earth dolly complete all as specified.

S&F switch piano type flush single pole one way 230 Volts AC 5/6Amps, including necessary connection complete all as specified.

S&F socket outlet 5 pin, 5 Amps, 230 Volts AC flush type, including necessary connection complete all as specified.

S&F switch piano, flush type, 15 Amps single pole, one way complete all as specified

S&F socket 2 in 1, 3 pin, 5 and 15 Amps flush type complete all as specified.

S&F ceiling rose, 2/3 Point, polycorbonate, insulated body complete all as specified.

S & F stepped type electronic fan regulator flush type complete all as specified.

S&F LED wall mounted bracket fancy type light fitting complete all as specified.

Taking down carefully light fitting any type complete all as specified. .

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc. of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash/ paint/ distemper wherever required complete all as specified.

S&F epoxy powder coated MCB, DB, double door TPN horizontal 4 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified.

S&F MCB distribution board SPN 8 way 230 Volts AC, Double door type of sheet steel phosphotised powder painted with bus bar neutral earth bar complete all as specified.

S & F MCB TPN 415 Volts 63 Amps C series 10 KA, including necessary connection complete all as specified

S & F MCB SPN 230 Volts 32 Amps C series 10 KA, including necessary connection complete all as specified .

S & F MCB SP 230 Volts 6 to 32 Amps C series 10 KA, including necessary connection complete all as specified.

M&L in repair for submain wiring for sub main DB comprising two single core, 6 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including 25 mm dia 'medium grade' PVC conduits and conduits fittings complete (conealed type) including one single core 4 Sqmm nominal cross sectional area multistrand copper conductor cable PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified (cutting chases and making good of disturbed surfaces shall deem to be included in the unit rate quoted by tenderer).

M/s Sultan Khan

K R KAUSHAL AND SONS

M/S JAI VIJAY CONSTRUCTIONS

Saket Traders

ABC CONSTRUCTION COMPANY