REPAIRS TO ROOF SLAB, SUNKEN SLAB FLOORING TOILETS AND JOINERY IN RESIDENTIAL AREA AT RCI HYDERABAD

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.

M&L, 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate for receiving floor finishes, finishing the surface even and rough including necessary formwork complete all as specified and directed.

M&L, Vitrified Ceramic coloured tiles, 10 mm thick, light shade (square / rectangular) polished, area of each tile not exceeding 0.36Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including provision of 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

M&L, 10mm thick light coloured vitrified tiles in skirting, height 100mm, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L, coloured 7 to 8 mm thick Non skid ceramic tiles (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M&L, coloured glazed ceramic tiles of size 300 x 200mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L, coloured glazed ceramic tiles of size 350 x 250mm/300 x 450mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note for Sl item No 3 to 7: Shade and design/pattern of tiles shall be as approved by GE.

Dismantling of stone slabs or tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

M&L, 20 mm thick granite tiles (of any type) machine cut, in floor, cooking platforms, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed

M&L, 20 mm thick granite tiles (of any type) machine cut, in skirting/dado, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed

S&F in repairs vitreous china wash hand basin, white, flat back, size 550 X 400 mm includng PVC waste pipe 75 centimetre long suitable for 32mm bore, 32 mm brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed

S&F in repairs stainless steel sink with draining board overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm made of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting to union / pipe complete all as specified and as directed.

S&F in repairs stainless steel sink overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm made of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting to union / pipe complete all as specified and as directed.

S&F in repairs, plastic water closet seat, black/white closed pattern with flat bottom, cover and mild steel chromium plated hinging device for pedestal pan complete all as specified and as directed.

S&F in repairs, tubular towel rail, 20 mm dia, D type, brass chromium plated, 60 centimetre long between flanges, complete all as specified and as directed.

S&F in repairs, towel ring of PTMT with Chromium plated brass screws and wooden/plastic cleats (minimum weight 90 grams) complete all as specified and as directed

S&F in repairs, 32mm dia PVC waste pipe of 90 centimetres long for WHB/Sink/Urinal with cup complete all as specified and as directed.

S&F in repairs, 32 mm dia PVC waste fittings, brass chromium plated for sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S&F in repairs, 15 mm dia bore bib taps (long body), cast copper alloy, fancy type, chromium plated with capstan head, screwed down, and screwed for iron pipe/GI pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, 15 mm dia bore bib taps (short body), cast copper alloy, fancy type, chromium plated with capstan head, screwed down, and screwed for iron pipe/GI pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron/GI pipe complete all as specified and directed.

S&F in repairs, 125 mm dia, brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F in repairs, chromium plated, hand shower health faucet with health faucet tube of 1.2 metre long and hook etc screwed for 15mm bore iron pipe complete all as specified and as directed.

Demolition of brickwork or stone masonry including all quoins, arches, pillars, etc., built in cement mortar complete all as directed.

M&L, brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc., including removal of rubbish material off the premises complete all as directed.

M&L, 15mm thick rendering in cement mortar 1:4, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment from external surfaces of walls and ceiling surfaces thoroughly by machine grinding, scrapping, rubbing/wire brushing, sand papered and watering with jet etc., and applying two coats of weather proof anti fungal/algal exterior acrylic emulsion paint (100% acrylic), premium quality, over a coat of primer over all as per manufacturer's instruction and complete all as specified and as directed.

M&L, preparing the newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Disconnecting the existing tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside (or lowering if required) for cleaning etc and hoisting, reconnecting and re-fixing in position duly cleaning and removing all scale and dirt etc writing date of cleaning with white paint using stencil marking complete all as specified and as directed

Taking down existing roof treatment of any description including screed on roof surfaces upto original roof level including cleaning by picking, sweeping and washing down with water to remove dust and disposal of debris off the premises complete all as directed.

M&L, preparation of surfaces by removing oil, grease, dirt, dust and loose particles and making surfaces dry and applying evenly Smartcare Epoxy primer at the rate of 150 - 200grams/Sqm and applying evenly single component liquid, cold applied Elastomeric Polyurethane waterproofing coating by rollers in two layers at the rate of 500grams/Sqm per coat over primed surfaces as per manufacturer's instructions complete all as specified and as directed.

M&L, preparation of cracked surfaces by removing any loose paint, dust or grease and removing existing coating completely and filling crack by ready to use fiber glass reinforced crack filling compound for both interior and exterior surfaces to ensure crack bridging for plaster cracks of upto 3mm as per manufacturers instruction's complete all as specified and as directed.

M&L, 15mm thick rendering in cement mortar 1:4, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement mixed with integral water proofing compound as per manufacturer's instructions complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specifically provided and disposing off rubbish materials from the premises for complete all as directed.

M&L, 40mm average thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in filling in sunken floors complete all as specified and directed.

M&L, water proofing treatment to bottom and sides of sunken floor with Acrylic based polymer modified cementious composite compound in two layers, 1st layer @ 0.4888kg cement mixed with 0.253kg composite compound per sqm and allow to dry for 4 Hours then apply 2nd layer @ 0.242 kg cement mixed with 0.126 Kg composite compound and testing including providing 32mm dia GI spout pipe of length not less than 30cm from outer face complete all as specified and directed.

S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440mm, white, with integral foot rests, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., complete including provision of cement concrete bedding in 1:5:10 type E2 using 40mm graded stone aggregate and making good to floor complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete including fixing to floor with bolts, including provision of plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs, 10 litres, PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs, PVC flush bend of 32 mm dia for PVC flushing cistern of any shape complete all as specified and directed.

S&F in repairs, PVC waste pipe 32mm dia, 90 cm long for WHB/Urinal/sink with cup complete all as specified and directed.

S&F in repairs, PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts complete all as specified and directed.

S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S&F in repairs, CP Grating doom 125 mm dia with waste hole (Minimum weight 40 gms) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame), exceeding 1.5Sqm but not exceeding 4Sqm, complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame), not exceeding 1.5Sqm, complete all as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

S&F, pressed steel frame for doors of size 105 x 60mm with one or more rebates made out of 1.25 mm thick plain black mild steel sheet including necessary fixing lugs, hinges, lock strike plate etc with one coat of red oxide primer complete all as specified and as directed

S&F, pressed steel frame for doors of size 125 x 60mm with one or more rebates made out of 1.25 mm thick plain black mild steel sheet including necessary fixing lugs, hinges, lock strike plate etc with one coat of red oxide primer complete all as specified and as directed

M&L, PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in chowkhat filling and the like complete all as specified and directed.

S&F, second class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, 2nd class hardwood glazed and skeleton shutters, 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded fitted with cut and mitred beads for securing glass etc, size of members as specified in SSR Part I section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mitred and rebated bars any numbers complete all as specified and directed.

S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

S&F, 100mm size butt hinges medium weight, cold rolled mild steel complete all as specified and as directed.

S&F, 75mm size butt hinges medium weight, cold rolled mild steel complete all as specified and as directed.

S&F, aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 75mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F, powder coated (Thickness of powder coating not less than 50 micron) aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat for fixing etc., fabricated complete to received sheet glass and prelaminated board complete all as specified and as directed.

S&F, aluminium powder coated of any colour (Thickness of powder coating not less than 50 micron) window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1No) including 4mm thick float/pin headed glazing with EPDM washers complete all as specified and directed.

S&F, aluminium powder coated of any colour (Thickness of powder coating not less than 50 micron) ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading including 4mm thick float/pin headed glazing with EPDM washers complete all as specified and directed.

S&F, Decogrill design size DG-202 including U channel complete all as specified and directed.

S&F, Curtain rod, Stainless steel of grade 304, 25mm dia, heavy grade, including finials (brackets on the end) with brackets fixed on wall with plastic rawl plug and stainless steel screw of 38mm long, two brackets not less than1830mm (6feet) centre to centre and one bracket additional for additional 610mm (2feet) increse in length of curtain rod, complete all as specified and directed.

Dismantling of sheets in roof coverings (corrugated, semi corrugated etc.,) any material including ridges, bolts and nuts complete all as directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet / trapezoidal steel sheet 0.50mm base metal thickness of any colour having tensile strength of 550 MPa covered with polythene protective layer as in roof covering/cladding to wall, fixed with self tapping screws and EPDM washers complete all as specified and directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa covered with polythene protective layer as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws and EPDM washers complete all as specified and directed.

M/s K Venkateswara Rao

PAVAN ENTERPRISES

M/S GDR CONSTRUCTIONS

SAI ENTERPRISES