Munsif Court Periyakulam - Electrical

Amount

Rewiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch on MS sheet painting with of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / fan point (for electronic regulator) ( 5 points/coil) (Data-1)

Renewal by supply and fixing of single box type 4'-20 W LED fitting (Philips / Havells / Eq) with CRCA body complete with TW round blocks on wall or ceiling with 20 W LED tube with PVC unsheathed Copper leads from terminals to the fitting. (DATA-2)

Renewal by supply and fixing of philips make essrntial 9W LED bulb foe BH poin (DATA-3)

Renewal by supply and fixing of 4' twin box type which holds 2 Nos 20W LED Lamp with 1 mts conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminals to the fitting with LED Tubes(DATA-4)

Renewal by supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")(SD 106)

Renewal by supply and fixing of 1400mm sweep (56") AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod including fan clamp with side plates and cross arm of size 450mm(SD 106)

Renewal by supply and fixing of 450mm Oscillating type wall mounting fan (Crompton /Havells /Orient/ Usha make helix high speed /Eq) on wall with connection complete. (DATA-5)

Renewal by supply ly and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete without provision of holes in the wall (SD 117)

Renewal by supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan(SD 120)

Renewal by supply and fixing of 3 nos of 5A( 3 pin& 2 pin) combined flush type wall socket with 3 no of 5A flush type switch concealed in suitable MS box on wall with painting(DATA-6)

Renewal by supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box on wall with painting(DATA-7)

Renewal by supply and fixing of 1 no 20 A DP MCB in DP sheet steel enclosure box in flush with wall with connections.(DATA-8)

Renewal by supply and fixing of 1 no 32A 4P MCB in 4P sheet steel enclosure box in flush with wall with connections.(DATA-9)

Renewal by supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet with supply and fixing of 45W LED warm white street light fitting (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .(DATA-10)

Renewal by supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade wire with painting of suitable colour(DATA-11)

Renewal by supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gauge MS coundit pipe on wall and ceiling with continous earth wire connection of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade wire with painting of suitable colour .(DATA-12)

Renewal by supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on Angle iron frame on wall with earth connection complete. Higher End (SD 594)

Renewal by supplyy and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB, 15 nos. 6A to 32A SP MCB as outgoing on Angle iron frame on wall with earth connection complete. Higher End (SD 594)

Renewal by supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour(SD52)

Renewal by supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD 68)

Renewal by supply and run of 4 of 6 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD 73)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)

Renewal by supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection ( SD 458)

Renewal by supply and erection of 2 kVA Single Phase in and Single phase out sinewave / 24 V DC line interactive Technology Inverter system with 2 Nos 12V/150AH capacity SMF battery for 2 hour backup time depending upon the load condition with connections complete. The Technical specifications of the inverter shall be as follows. a)Capacity 2000VA / 24 VDC with pure sinewave. b)Input voltage range 170V to 270V AC single phase. c)Output Voltage 230V AC Single phase. d)Back time 1 Hour. e)Digital indication Showing Mains ON, Invereter ON, Low Battery, Battery Voltage, Connected load in watts. f)fuse Protection, in built resettable circuit breaker Protection. (Inverter make Luminous/ Microtek or Eq) (Battery should be Exide /INVA Master/ Luminous make) (SR)

Renewal by supplyy and clarnping of 2 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 217)

Renewal by supply and Laying of 2 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(DATA-13)

Renewal by supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection (SD 183)(SD 183)

Renewal by supply and fixing of 2 nos 150W LED Flood Light warm white (4000k -5000k)with Integrated Driver placed on the Angle iron on existing post with coonnection complete.(DATA-14)

Renewal by supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete (SD 129)

Renewal by supply and fixing of 1 no 63A 4P RCCB in 4P sheet steel enclosure box on wall with connections.(DATA-15)

Renewal by supply and fixing of KLITE make KP4792 model 4.27Mts die cast Al gardening flat lighting pole with build in control box,service door,mcb,connector and 30w KLITE make Dynasty midi model 30 w led with necessary sutiable conceret masonary work,bolts nuts,base plate with complete connection etc.(DATA-16)

KARTHIKEYAN ELECTRICALS

T PAULKANNU & CO