MAINT/ REPIR/ REPLACEMENT OF INTERNAL ELECTRIFICATION INCL WIRING, BUILDING EARTHING, FITTING AND FIXTURES REPAIR/SERVICING OF FANS, GEYSERS AND ASSOCIATED WORK IN AOR OF AGE B/R MANDAPAM UNDER GE(I) (CG) CHENNAI

Material and labour for point wiring complete with two runs of 1.5 Sqmm (for Phase and Neutral) PVC insulated unsheathed multistranded, copper conductor FRLSH cable of 1100V grade conforming to IS - 694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked of suitable dia (not less than 20mm dia) with conduit accessories concealed in wall/floor and fixed on ceiling/ roof/ truss/ columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti-corrosive paint for housing the switches, sockets, fan regulator etc and covered with 3 mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc., complete concealed in walls and provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., for one light point/fan point/bell point controlled by one switch including Taking down carefully copper / aluminium point wiring complete along with fittings etc., complete all as specified and as directed.

Note for item No.1.00: (a) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (b) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate.

All as per item No 1.00 here-in-before but for 5A socket point on same board.

All as per item No 1.00 here-in-before but for 5A independent socket point.

All as per item No 1.00 here in before but one light point controlled two switches.

All same as per item No.1.00 above but with 4 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 4 sqmm PVC insulated copper cable as earth continuity for power socket on independent board.

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 20mm PVC conduit totally concealed/surface conduit in walls/ceiling with tee, bend, elbows, junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including 1.0mm thick prefabricated concealed galvanised boxes with white modular cover plate & frame of suitable size for fixing modular switches, sockets regulator and connected the earth wire to common earth dolly for One light/fan point/bell point/5 Amp independent Socket point controlled by one switch including taking down the existing old wiring of any description and type complete all as specified and as directed. Note for item No.6.00: (a) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (b) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate.

All as per item No.6.00 here-in-before but for 5A socket point on same board.

All as per item No.6.00 here-in-before but for 5A socket point on independent board.

All as per item No.6.00 above but with 4 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 4 sqmm PVC insulated copper cable as earth continuity for power socket on independent board.

Supply and fix in repairs Modular switch 1 way 6A, 1 module single pole complete all as specified and directed.

Supply and fix in repairs Modular switch 1 way 16A, 1 module single pole complete all as specified and directed.

Supply and fix in repairs modular Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified and directed.

Supply and fix in repairs modular Socket 6A/16A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified and directed.

Supply and fix in repairs modular Fan step regulator, 120W - 2 module complete all as specified and directed.

S & F in repairs switch piano flush button, single pole one way 5 Amps, 230V AC supply complete all as specified and directed.

S & F Two way switch piano flush button 6 A complete all as specified and directed.

S & F in repairs switch socket combination 3 pin 5 Amps flush type with out gang box, 230V AC supply, complete all as specified and directed.

S & F in repairs switch socket combination 2 in 1 5 pin, 5/15 Amps flush with out gang box, 230V AC supply , complete all as specified and directed.

S & F in repairs switch socket combination 3 pin 5 Amps flush type with gang box, 230V AC supply, complete all as specified and directed.

S & F in repairs switch socket combination 2 in 1 5 pin, 5/15 Amps flush with gang box, 230V AC supply , complete all as specified and directed.

S & F in repairs bell push piano flush button 6A 230V complete all as specified and directed.

S&F in repairs electronic fan regulator, upto 300 Watt, 230V AC supply complete all as specified and directed.

S & F in repairs Calling bell ding dong 230 v AC supply complete all as specified and directed.

Supply and fix in repairs ceiling rose surface bake lite 65 x 30 mm with 3 terminals complete all as specified and as directed.

Removing of light fitting of any type during the wiring work and refixing the same including replacement of 2 core connecting wire complete all as specified and as directed.

Supply and fix Hylam sheet required as per existing size in site with screws suitably cutted for existing switch fixtures including removing old one all as specified and as directed.

S & F LED tube light fittings, 20 watts retro bar professional WH 5700K to 6200K and minimum 1800/2000 lumens of warm/cool white comprising of batten with powdered coated aluminum housing & integrated electronic driver with THD<10% with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F LED light fittings, 10 Watts 2 feet long of minimum 900 lumens of warm/ cool white wall mounted batten with with powdered coated aluminum housing & integrated electronic driver with THD<10% with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F wall mounted bulk head LED light of minimum 700 Lumens warm/cool day light, environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head Back-lit LED luminaire comprising of high brightness LEDs all as per CAt No. Philips WT202W LED6S CW PSU S3 PC of Philips or technocommercially equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F Square recessed mounted Slim type 35/36Watss LED light (2'x2') of minimum 3200 to 3600 Lumens warm/cool day light all as per Cat NO.RC370B LED36S - 6500 G6 L60W60 of Philips or technocommercially equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F 36Watts Square surface mounted box type LED light (2'x2') of minimum 3200 to 3600 Lumens warm/cool day light all as per Cat No.SM367 LED36S-6500 G6 L54W54 PSU OD of Philips or technocommercially equivalent of other specified makeswith all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F 36Watts Square surface mounted box type LED light (1'x4') of minimum 3200 to 3600 Lumens warm/cool day light all as per Cat No.RC380B LED36S-6500 G5 L12W3 PSU OD of Philips or technocommercially equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F 22Watts LED suspended light fitting WH 5700K to 6200K and minimum 1800/2000 lumens of warm/cool white comprising of batten all as per Cat No.SP780H LED22S-8500 PSU W5L112 OD S1 WH of Philips or technocommercially equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including taking down old fitting complete and hanging with proper balance the suspended light all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F 70Watts Building Security light LED type of minimum 7000to7500 Lumens Pressure die cast aluminium housing IP 66 protection all as per Cat No.BRP032 P LED75 CW SLR PSU GR SPD of Philips or technocommercially equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F 30Watts Building Security light LED type of minimum 2500 to 3000 Lumens Pressure die cast aluminium housing IP 66 protection all as per Cat No.BRP330LED30 CW R5N PC PSU S1 V1 of Philips or technocommercially equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F in replacement bulb holder (pin pype/threasd type) complete all as specified and as directed.

S & F in replacement bulb of 9W (pin pype/threasd type) complete all as specified and as directed.

S & F LED bay light fitting 9000 to10000 Lumens (min) new generation LED with high luminous efficacy, IP66 protected, front toughened glass, energy saving Pressure die cast aluminium housing all as per Cat No.BY286V LED 100S CW M3-S60 PSU FG WH V2 of Philips or technocommercially equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S & F 200Watts LED flood light 18000 to 20000 Lumens (min) new generation LED with high luminous efficacy, IP66 protected, front toughened glass, energy saving Pressure die cast aluminium housing all as per Cat No.BV283 LED240 CW FG SY5NB 200W V1 of Philips or technocommercially equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

S&F Cable Junction of size 93 x 93 x 62 Boxes IP 66/69 “halogen free and weather proof” all as per Hensel Model No. KF 0202 G or technocommercially equivalent of other specified makes for 2.5 sq.mm cable for outdoor installation.

Supply and fix Post top lantern for 360 degree indirectlight with IP- 65 protection 40W AC Supply single phase energy saving, environmental friendly, long life aesthetically designed with resistant to impact and corrosion, Glare free and better uniformity and symetrical light distruction spun aluminium landscape luminaire with high power LEDs as light source all as per Cat No.BGP200 LED45 CW PSU GR CPC SPD of Philips or technocommercially equivalent of other specified makes complete all as specified and directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

Supply and fix Post top lantern for 360 degree indirectlight with IP- 65 protection 25W AC Supply single phase energy saving, environmental friendly, long life aesthetically designed with resistant to impact and corrosion, Glare free and better uniformity and symetrical light distruction spun aluminium landscape luminaire with high power LEDs as light sourceall as per Cat No.BGP200 LED26 CW PSU GR CPC SPD of Philips or technocommercially equivalent of other specified makes complete all as specified and directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details and warranty as per particular specification.

Taking down ceiling fan from its position and doing complete overhauling of fan including dismantling, replacement of fan clamp and split pin, rubber bush refixing the same after repairs complete all as directed.

M & L for painting of ceiling fan of any sweep with synthetic enamel paint over a paint of primer including filling of cavities complete all as specified and as directed.

S & F in repairs oil capacitor of 2.5 mfd for ceiling fan of any sweep complete all as specified and directed.

S & F in repairs bearing of suitable size for ceiling fan of any sweep complete all as specified and directed.

M & L for rewinding of ceiling fan motor of type 1200 mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish etc. complete all as specified and directed.

Taking down Exhaust fan of any size from its position and doing complete overhauling of fan including fan capacitor of 4.0mfd and other spare parts painting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all as directed.

M & L Rewinding of Exhaust fan motor of sweep upto 300mm & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size,painting etc. complete all as specified and directed.

Taking down Air circulator fan of any size above 450mm sweep from its position and doing complete overhauling of fan including replacement of fan capacitor of upto 6.0mfd and other spare parts, painting with synthetic enamel paint over a paint of primer refixing the same after repairs complete all as directed.

M & L Rewinding of Exhaust fan motor of sweep upto 450mm & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitable size, painting etc. complete all as specified and directed.

S & F in repairs MCCB 4 Pole, 32/40/63 Amps, 50 Hz, 16KA, 415 Volts with all necessary aluminium lugs and glands, etc complete all as directed.

S & F in repairs MCCB 4 Pole, 100 Amps, 50 Hz, 25KA, 415 Volts, with all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs MCCB 4 Pole, 125 Amps, 50 Hz, 16KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as directed

S & F in repairs MCCB 3 Pole, 160 Amps, 50 Hz, 16KA, 415 Volts,adjustable thermal and fixed magnetic type with all necessary aluminium lugs and glands, etc complete all as directed

Supply and fix in replacement of Factory made sheet metal enclosure for Vertical TPN MCB DB double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc., complete all as specified and directed.

Supply and fix in replacement of Factory made sheet metal enclosure for TPN MCB DBs double door (Fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc., complete all as specified and directed.

Supply and fix in repairs of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed.

Supply and fix in repairs of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed.

Supply and fix in repairs of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed.

Supply and fix of MCB 6 to 32AmpS, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified

Supply and fix of MCB 32Amps, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified

Supply and fix of MCB16 to 32 Amps, 415 Volt, TPN, breaking capacity 10 KA 'C' series, , complete all as specified

Supply and fix of MCB 25 to 63 Amps, 415 Volt, TP, breaking capacity 10 KA 'C' series, , complete all as specified

Supply and fix of RCBO, 40 Amps, Double Polee, 30mA - 100mA complete all as specified an as directed.

Material and labour for submain wiring complete with four runs of 10.00 Sqmm single core, multistranded, FRLSH PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked 32mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with two runs of 10.00 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: (a) Six (06) runs of 10.00 Sqmm multistranded cable and one run of 32mm dia PVC conduit shall be considered as one unit length. (b) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate.

Material and labour for submain wiring complete with four runs of 6.00 Sqmm single core, multistranded, FRLSH PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked 32mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 6.00 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: (a) Five (05) runs of 6.00 Sqmm multistranded cable and one run of 32mm dia PVC conduit shall be considered as one unit length. (b) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate.

Material and labour for submain wiring complete with two runs of 6.00 Sqmm single core, multistranded, FRLSH PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked 25mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 6.00 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: (a) Three runs of 6.00 Sqmm multistranded cable and one run of 25mm dia PVC conduit shall be considered as one unit length. (b) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate.

Material and labour for submain wiring complete with two runs of 4.00 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked 25mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 4.00 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: (a) Three runs of 4.00 Sqmm multistranded cable and one run of 25mm dia PVC conduit shall be considered as one unit length. (b) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate.

Material and labour for submain wiring complete with two runs of 2.50 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked 25mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 2.50 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: (a) Three runs of 2.50 Sqmm multistranded cable and one run of 25mm dia PVC conduit shall be considered as one unit length. (b) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate.

supply and fix in repairs test point terminal box of size 200 x 100 x 100 mm made out of 2 mm thick hot dip galvanised sheet drilled and screwed including 6 Nos 15 mm long hexagonal head screws complete with test point terminal block made out of Gun metal or Phosphorus Bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws, etc complete all as specified and directed.

M & L for taking down & refixing shutter/hanger door motor of capacity up to 7.5HP after repairing and overhauling the gear box assembly by metal filling, cutting and other maching process in lathe complete including replacement of chain and spocket with mounting shaft all as specified and directed.

M&L for Rewinding of rolling shutter/hanger door motor of capacity up to 7.5HP, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc.including repairing andoverhauling the gear box assembly by metal filling, cutting and other maching process in lathe complete including replacement of bearing of suaitable size and chain link and spocket with mounting shaft all as specified and directed.

M&L for replacement of startor single phase/3Phase DOL type suiatable for hanger/rolling shutter two way revolving type (clockwise and anticlockwise both type) complete all as specified and directed

Supply and fix LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium conductor, 1100 volts grade confirming to IS-7098 (Part-I) 1988 of size 2 Core x 10 Sqmm drawn through pipes or in road crossings/ paths/drains/ ducts/ floors/ along poles/ equipments etc., of including connecting up using suitable size aluminium lugs testing and commissioning etc., complete all as specified and as directed.

M&L for limit switch LSRS 10A-125,250 or 480 V ACsuitable for shutter/hanger door complete all as directed

S & F in repairs 3 Modular socket encloser with 3 moduler cover plate & metal Flush box including one single pole MCB, SCP , 20 Amps. 240 volts, 10KA ,C cure complete suitable for AC/ watercooler all as specified and directed.

S & F in repairs sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB, SP, 20 Amps, 240 volts, 10 KA complete suitable for AC/watercooler all as specified and directed.

S & F in repairs Wall mounted Alternating current socket (Industrial socket) of 32 Amps, 3 pole, neutral and earth (3P+N+E) , IP 44 protection of metal body three phase 415 Volts, 50 Hz with provision of 32 Amps MCB TPN including necessary fixing arrangements complete all as directed.

S & F in repairs Wall mounted Alternating current plug (Industrial plug) of 32 Amps, 3 pole, neutral and earth (3P+N+E) , IP 44 protection of metal body three phase 415 Volts, 50 Hz including necessary fixing arrangements complete all as directed.

S & F in repairs Aviation obstruction light LED type filament-less bulb complete including standard fixing arrangements including timer switch complete all as per Bajaj cat part No BGAV 302 LED ot technocommercially equivalent of other specified makes complete all as specifed and as directed

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI strip of 32x6 mm size by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber, cover slab with angular iron for holding, 20mm dia GI medium grade pipe for watering , and water funnel with wire mesh, 40mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber, cover slab with angular iron for holding, 20mm dia GI medium grade pipe for watering , and water funnel with wire mesh, 40mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion.

M & L for cleaning around earth pit and pouring of salt water including testing of earth complete including making of proper fininshing and painting complete all as specified and as directed.

M & L for cover slab of earth pit of building complete including placing of iron angular for opening & closing of cover slab and painting complete all as specified and as directed.

M & L for taking down existing electric geysers of any type and capacity including dismantling the spares and cleaning, servicing the geyser by descaling inner body of water tank and cleaning it with soap and acid mixed water, brazing or welding of tank as required and reassembling the geyser set and refixing the same in original position including checking for proper function complete all as directed. Note: Quoted rate is deemed to be inclusive for any minor spares such as nut & bolt auto cut, washers, indicating lamp etc as required. However geyser element & thermostat shall be measured and paid seperately

S & F in repairs geyser heating element 1.5 KW capacity complete all as specified and directed.

S & F in repairs Thermostat of necessary capacity complete all as specified and directed.

Supply & Fix in repairs Hot and cold pipes complete along with ncessary nuts and bolts as required and as specified and directed.

Supply and Fix 36W LED driver for 2' x 2' LED Light fittings complete all as specified and directed

M & L for Earth continuity conductor or main earthing lead fixed to wall or recess or chasses or buried in groung or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron wire including taking down old unserviceable one complete all as specified and directed.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chasses or buried in groung or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 25 X 4 mm galvanised iron strip including taking down old unserviceable one complete all as specified and directed.