Loading
Loading…
Loading…
Tender Value
₹4.9 L
EMD Value
₹9,781
Closing Date
2 Sept 2026, 2:30 pm
Divisional Forest Officer
Middle Andaman Rangat
Replacement of roofing sheet, rolling shutter and painting of store godown at Rampur under Rangat Range during 2026-27.
2026_DFOMA_24360_1
MA/2(S)/159/04 dated 21/08/26
Open Tender
Civil Works - Buildings
Works
60 days
Rangat
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹9,781
21 Aug 2026
21 Aug 2026
2 Sept 2026
21 Aug 2026
2 Sept 2026
21 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. | |||||
| 1.1 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.85 | Cum | 10 | ₹8.53 |
| 2Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). | |||||
| 2.1 | Category - II A | 0.05 | Cum | 10 | ₹0.46 |
| 3Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) | |||||
| 3.1 | Category - II A (35 mm thick shutters) | 2.1 | Sqm | - | - |
| 4 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | 6 | Each | 1 | ₹6 |
| 5Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: | |||||
| 5.1 | 125x63x4 mm | 3 | Each | - | - |
| 6Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
Tendernotice_2.pdf
PDF • 5.08 MB
BOQ_25799.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].