O and M of Street Light and Road Light

Amount

Regularly operation and maintenance of electronics pole mounting dusk down photo cell timer, clock type timer,ON-OFF panel 63/100 amp rating main switch by required replacement all defective accessories which are burnt, broken and missing such as air break, contractor, 3 pole MCCB, Single Pole MCCB, solar plate,electronic/micro controller, copper strip lead wire insulator,hard ware up to supply sources and also regularly maintain log sheet of time ON-OFF and must be intimate to site incharge/engineering incharge & if any type of need from JVVNL immediate to inform related office and any type required help to take them 1) For 63/100 Amp rating (3-phase) (Total 12 month)

Regularly operation and maintenance of manual main switch operated ON-OFF & including all needfull replacement by defective,burnt, and broken accessories such as kitkat fuse ,handle unclip fuse wire HRC fuse copper strip connecting rode etc maintain log sheet and time to time intimate to site incharge/engineer in charge & if any type of need from JVVNL immediate to inform related office and tyupe required help to taken them .32 AMP Switch/63 amp switch/100 amp switch/200 amp switch.(Total 12 month)

Regularly operation and maintenance of existing LED lights (20-25 watt, 30-40 watt,80-90 watt,110-120 watt and 40W/60W LED Post Top fixture with replacement of defective accessories as per direction of engineering incharge (Total 12 month)

Regularly operation and maintenance of existing High mast lights (12.5/16/30 mtr) high power LED Flood Light 120 W/160W/200 W & Panel with replacement of defective accerious as per direction of engineering incharge.(Total 12 month)

Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <1000mA shown in LM79 report. The luminaire shall be BIS certified and T.C. certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened ,color Rendering Index >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced

70 watt LED Street Light fixture

Bidder Name

Amount

Shree Ram Electricals(GSTN-08AJVPM9530B1ZW)

K.K.Enterprises(GSTN-08AKAPM6812E1ZE)

ISHIKA ENTERPRISES(GSTN-08AJFPC5805K1Z9)

M/S YUVRAJ ELECTRICALS(GSTN-08AHJPB5540N1Z5)

K.K.Enterprises

M/S YUVRAJ ELECTRICALS

Shree Ram Electricals

K.K.Enterprises

M/S YUVRAJ ELECTRICALS

Shree Ram Electricals