AMC of repair and maintenance of 440 Volt O/H line and erection of poles, stay sets, insulators and conductors etc. for Bandh Colony and IBM Colony under Kathara Washery

Amount

Erection of metallic pole / steel tubular pole of length exceeding 10 M but not exceeding 13 M in cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc as required.

Supplying and erection of stay set complete (galvanized) with 19/20 mm dia X 1.8M long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc as required.

Supplying of channel iron 75MM X 40MM X 6MM (7.14 Kg Per Mtrs) cross arm for 2 wire overhead line complete with clamps, bolts, nuts and washer etc. including drilling of holes for insulator pins etc. (as per drawing) and painting with primer and finished paint as required.

Supplying of channel iron 75MM X 40MM X 6MM (7.14 Kg Per Mtrs) cross arm for 4 wire overhead line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc. (as per drawing) and painting with primer and finished paint as required.

Erection of angle iron / channel iron cross arm on Wood / RCC / PCC / Steel Tubular / Rail Pole etc as required.

Supplying and erection of a set of cross bracing FRL same work for 11 KV/440 Volts over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required

Supplying and erection of galvanized ‘D’ iron clamps complete with shackles insulator (100MM X 110MM), G.I bolts and nuts, washers coach screws etc as required.

Supplying and erection of 100mm X 80mm pin insulator complete with G.I. spindle and nuts etc as required.

Dismantling of pole / street light standard / strut embedded in cement concrete foundation etc. as required.

Erection of ACSR conductor DOG of 7/3.35mm to 7/4.00 diameter and above including binding etc as required. (15 SPN X 40 Mtrs. X 4 Wire) = 2400 Mtrs X 0.394 Kg / Mtrs. = 945.60 Kg. + 2% sagging + 2% binding & jumphering = 983.42 Kg

Total impact of GST for the purpose of CTC

M/S TIGER ENTERPRISES

M/S JAY GURU CONSTRUCTION