Loading
Loading…
Loading…
Tender Value
₹29.3 L
EMD Value
₹58,700
Closing Date
20 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
12 conditions · 1 needing a document upload
Electrical License: The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union TerritoryAdministration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected Note: In case of expiry of validity of license during contract, the contractor should renew the license so that it is always valid during contract).
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Nanded Division: Proposal for TRD Depots at CPSN- Electrical Arrangements
NED-E-17-2026-27
NED-E-17-2026-27
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹58,700
20 Aug 2026
29 Jul 2026
6 Aug 2026
139 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 29,33,091 | ||
| — | 142.00 | — | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( upto 10 meters lenght) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 94,288 | |
| — | 400.00 | — | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS694 (2010) with latest amendements. | — | — | — | 40,400 | |
| — | 160.00 | — | — | ||
| Supply and run of 2 nos, 4.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of2.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS694 (2010) with latest amendements. | — | — | — | 24,320 | |
| — | 100.00 | — | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS694 (2010) with latest amendements. | — | — | — | 17,900 | |
| — | 700.00 | — | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter | — | — | — | 33,600 | |
| — | 600.00 | — | — | ||
| Cutting of groove in the wall, plastering of surface to the original for concealing of the conduit in the wall (Layingand fixing of conduit will be paid separately). | — | — | — | 24,600 | |
| — | 53.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular controlswitch on existing control board with wiring. | — | — | — | 18,391 | |
| — | 8.00 | — | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control includingall accessories. | — | — | — | 3,424 | |
| — | 15.00 | — | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalentwith 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make orequivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 6,180 | |
| — | 8.00 | — | — | ||
| Supply and fixing of metal flush box-6 module of model no:JIM 06 004 of GM FOURFIVE make or its equivalent with 6 module cover plate (With support frame) of model no:PK SB 06 005 - CASABLANCA of GM make orequivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,120 | |
| — | 16.00 | — | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make or its equivalentwith 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make orequivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 5,696 | |
| — | 83.00 | — | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supplyincludes accessories such as clamps, ties extension wires etc for fixing) as per attached railway specification | — | — | — | 31,955 | |
| — | 8.00 | — | — | ||
| Supply and fixing of 9W LED bulbs as per attached railway specification. | — | — | — | 1,248 | |
| — | 8.00 | — | — | ||
| Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 of Havells make or equivalent make withnecessary screws and all accessores complete. | — | — | — | 560 | |
| — | 8.00 | — | — | ||
| Supply and fixing of Jumbo plate for Holder similar to model no. of ASSPGW002 of Havells or equivalent makewith necessary screws and all accessories complete. | — | — | — | 184 | |
| — | 21.00 | — | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railwayspecification and including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 58,674 | |
| — | 6.00 | — | — | ||
| Supply and fixing of B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1 with its latest amendments. | — | — | — | 4,206 | |
| — | 4.00 | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) with its latestamendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 13,824 | |
| — | 18.00 | — | — | ||
| Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection asper IS/IEC 60898 - 1 with its latest amendments with all connected accessories. | — | — | — | 11,790 | |
| — | 3.00 | — | — | ||
| Supply and Erection of B curve 16 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection asper IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 681 | |
| — | 14.00 | — | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection asper IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 3,178 | |
| — | 2.00 | — | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection asper IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 454 | |
| — | 24.00 | — | — | ||
| Supply and fixing of 10A SP 1 Modular mini MCB conforming to IS:13947, C" Curve Model No.AB 1 111 of GMmake or it's equivalent in Module box including all accessories complete. | — | — | — | 8,304 | |
| — | 2.00 | — | — | ||
| Supply and fixing of C curve DP MCBs of 16/20/32 A with all connected accessories . | — | — | — | 1,724 | |
| — | 2.00 | — | — | ||
| Supply and fixing of C curve FP MCBs of 32 A with all connected accessories. | — | — | — | 4,312 | |
| — | 2.00 | — | — | ||
| Supply and fixing of DP MCB enclosures model no.5077 91 of legrand make or its equivalent. | — | — | — | 1,426 | |
| — | 2.00 | — | — | ||
| Supply and fixing of FP MCB enclosures model no.5077 93 of legrand make or its equivalent. | — | — | — | 1,822 | |
| — | 2.00 | — | — | ||
| Supply of DPX3 160+18 of 8 way DB of legrand cat no.5077 47 with metal door with provision for incomer ofMCCB up to 160 Amps , bus bar of capacity 250A and outgoing for 18 Module with busbar din and neutral linkwith all necessary accessories complete or equivalent make. | — | — | — | 32,424 | |
| — | 2.00 | — | — | ||
| Supply and fixing and connecting P-17 Tempra plug and socket IK 08, of 16A, 2P+E - DP of model no.5078 60 oflegrand make or equivalent as per IS/IEC 60309-1 (2002) with its latest amendments. | — | — | — | 7,500 | |
| — | 2.00 | — | — | ||
| Supply and fixing and connecting P-17 Tempra plug and socket IK 08, of 32A, 3P+E+ N -DP of model no. 507862 of legrand make or equivalent as per IS/IEC 60309-1 (2002) with its latest amendments. | — | — | — | 13,730 | |
| — | 4.00 | — | — | ||
| Supply, fixing and connecting of Cable Junction Boxes IP 55/IP 65 with metric knockouts for cable entry Cablejunction boxes of model no. K 9504 of Hensel make conforming to IS:13573/92,IEC 60947-3 with its latestamendments, with necessary terminals suitable for cables upto 50 Sq mm and all necessary accessories complete. | — | — | — | 29,244 | |
| — | 2.00 | — | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cablejunction boxes of model no. K 1204 of Hensel make or equivalent make with necessary terminals suitable for cables up to 150Sq mm and all necessary accessories complete. | — | — | — | 47,662 | |
| — | 400.00 | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sq.mm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 56,400 | |
| — | 200.00 | — | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 40,600 | |
| — | 700.00 | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 2,38,700 | |
| — | 1000.00 | — | — | ||
| Supply, Laying, Testing and Termination of 4 core 120 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 with latest amendments with necessary lugs and terminations complete. | — | — | — | 8,48,000 | |
| — | 11.00 | — | — | ||
| Supply, fixing, connecting of360° Ceiling Mounted Occupancy Sensor - dual Sensors that work on PIR &Ultra Sonic Technology.Occupancy Sensors covers both Micro Motion & Heavy Motion. Operating Volt: AC220-250V 50Hz-60Hz., Load power: Up to 300/1200WMax, Ambient Light: 3-2000(Adjustable), Load type: Bulb,LED light, CLF, fans, etc.,Detecting distance: 0 12M,Detecting Angle: 360 Degree.,Installation Height: 2.2-4 Mr.Motion Detection Speed: 0.61m/s, Power Cusumption:0.1W (static) &0.4(Work), Working Humidity:less than 93 % RH, Delay: 10Seconds -7 Supplying of cordless long-range calling bell with wiring connections complete. | — | — | — | 32,549 | |
| — | 60.00 | — | — | ||
| Supply and Laying of 4 core 10 sqmm copper cables XLPE insulated, cores laid up, PVC inner sheathed unarmoured 650/1100V grade as per IS 7098(Part 1) 1988. | — | — | — | 27,960 | |
| — | 1000.00 | — | — | ||
| Supply and laying of HDPE pipe of PE-80grade in PN-4 outer dia of HDPE pipe110mm (nearest 4"" dia) and wall thickness minimum 4.1 mm maximum 4.3mm with ""T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/ Nagarjunapolymer/Nandi/Plasto | — | — | — | 3,12,000 | |
| — | 1300.00 | — | — | ||
| Supply, erecting and laying of HDPE pipe of PE-80 grade in PN-4 outer dia of HDPE pipe 63 mm (nearest 2" dia) and wall thickness minimum 2.5 mm maximum 2.8mm with "T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/ Nagarjunapolymer/Nandi/Plasto | — | — | — | 1,61,200 | |
| — | 80.00 | — | — | ||
| Supply of 100 mm dia 'B' class ERW GI pipe conforming to IS: 1239 Part 1(2004)and fixing with suitable clamps on wall/building including laying of cable through GI pipe. | — | — | — | 85,920 | |
| — | 500.00 | — | — | ||
| Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of cable trench 30cm widex90cm deep oad etc., for laying of HT/LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly.Engineer. | — | — | — | 1,01,500 | |
| — | 600.00 | — | — | ||
| Excavation of cable trench 30 cm wide x 90cm deep in all types of soils for HT/LTUG cable as per specification | — | — | — | 73,200 | |
| — | 2400.00 | — | — | ||
| Supply and running of 8 SWG GI wire is tobe laid for earth continuity. | — | — | — | 28,800 | |
| — | 8.00 | — | — | ||
| Supply and erection of earth electrode as perthe enclosed specification (including digging earth pit, electrode earth box with reinforced concrete complete with all connected materials and works including connecting the earth electrode and aerial earthing according to IS 3043 and RDSO drawing ETI/OHE/P/7021 in other than substations. | — | — | — | 30,384 | |
| — | 8.00 | — | — | ||
| Supply and fixing of Ventilating Fans(Exhaust fan) of 4 pole 300 mm sweep size with metallic body with capacitor conforming to IS No.2312/67 (Reaffirmed2005) complete with louver and all connected accessories. Make:Havells/CG/Bajaj/Khaitan | — | — | — | 18,240 | |
| — | 4.00 | — | — | ||
| Providing & erecting 5 m high (clear height) galvanised OCTAGONAL pole with foundation bolts and it includes 6A SPMCB having bottom of 130 mm A/F, top70 mm A/F on provided foundation as per specification . Make:Bajaj/Valmont/ Transrail /MagneticIndustries or similar | — | — | — | 52,780 | |
| — | 4.00 | — | — | ||
| Providing & casting of M - 20 gradereinforced cement concrete (RCC)foundation suitable for 3m to 5m highoctagonal / conical G.I. pole consideringthe safe soil bearing capacity at site as 10T/sq m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template as per design in an approve dmanner. | — | — | — | 12,424 | |
| — | 4.00 | — | — | ||
| Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia 'B' class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia or suitable duly welded as per specification | — | — | — | 4,748 | |
| — | 8.00 | — | — | ||
| Service connection to the fitting from the junction box of 5 mtrs. Octagonal pole by means of PVC insulated copper conductor of 3 core 1.5 sq mm with necessary lugs at the junction box and necessary termination at the lumaninaire complete | — | — | — | 3,016 | |
| — | 8.00 | — | — | ||
| Supply and fixing of 40 W LED type weather proof street light fitting complete with all accessories and conforming to specification Make: Bajaj / Havells / Philips/Orient /Surya or similar | — | — | — | 20,128 | |
| — | 4.00 | — | — | ||
| Supplying and erecting single pole and neutral distribution board (SPNDB), with 2ways for incoming and 10 ways (10 poles)for outgoing SP MCBs, with door, 1.2mmthickness surface / flush mounted, IP 43Protection on iron / GI frame as per specification Make:Legrand/Havells/L&T. | — | — | — | 6,492 | |
| — | 2.00 | — | — | ||
| Supply and fixing of The set consisting of following material (1),analog timer with sheet metal enclosure containing 20A DP Contactor-1 No., (2),16A DP MCB -1 No. (3),Daily analog timer (24Hrs) -1No., on a DIN rail with a metal enclosure box of size 200mmX300X 105mmwith proper locking arrangement including internal connections with suitable wiring and wall / pillar fixing accessories. Make: Legrand , L&T, C&S, Siemens and Indo asian. | — | — | — | 9,904 | |
| — | 300.00 | — | — | ||
| Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling,welding, riveting etc.treated with anti-rust treatment and duly power coated as per the above specification. | — | — | — | 74,700 | |
| — | 40.00 | — | — | ||
| Supplying and erecting of50 mm x 5 mm size electrolyte copper patti or bar in bus bar chamber / in panel or any other purpose,500 V with require capacity with 99.9% copper purity with fixing arrangement(like lug or bottle type lug)to both the end with high grade poly olefin insulation sleeve complete | — | — | — | 45,200 | |
| — | 1.00 | — | — | ||
| Supplying and erecting LTCT multifunction DLMS compliance energy meter of accuracy of class 0.5with optical & RS 232 port,backlit LCD, measures &displays tri vector energy,load survey, TOD, tamper detection & logging, power ON /OFF events,instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs suitable for 3x240V,50 Hz. | — | — | — | 8,137 | |
| — | 3.00 | — | — | ||
| Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. | — | — | — | 2,634 | |
| — | 1.00 | — | — | ||
| Supplying and erecting panel mounting type digital ammeter having three and half digit LED display,external CT operated,calibrated for 0 to 1000AAC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer suitable to operate on 500V. | — | — | — | 1,361 | |
| — | 1.00 | — | — | ||
| Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0-750V AC suitable to operate on 500VAC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer suitable to operate on 500V. | — | — | — | 1,305 | |
| — | 2.00 | — | — | ||
| Supplying and erecting selector switch suitable for voltmeter/ammeter for 3phase AC supply500/1000V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs. | — | — | — | 640 | |
| — | 2.00 | — | — | ||
| Supply & provision of 3 Nos RYB indication lamps of LED type including with all connected accessories complete. | — | — | — | 876 | |
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of all material, excavation, and casting of cement concrete foundation/concreting in ratio 1:3:6 | — | — | — | 12,014 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release160 A ; 4Pole, MCCB suitable for operation on415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached.Make: L&T/Legrand/Havells Or Similar | — | — | — | 35,078 | |
| — | 2.00 | — | — | ||
| Supply and installation of DPX3 160 thermal magnetic based release ; Icu = 36K A; 100A 4 Pole MCCB conform to IEC 60947-2 of model no. 4200 95 of Legrand make or equivalent make with extended ROM , spreader links (2sets). | — | — | — | 18,278 | |
| — | 4.00 | — | — | ||
| Supply and fixing of 32 A 4P MCB B Curve IS/IEC 60898-1 (2002) 10 kA breaking capacity IP20protected terminals of model no.402463 of Legrand make or it's equivalent. | — | — | — | 8,884 | |
| — | 2.00 | — | — | ||
| Supply and fixing of 40 A Electromechanical 4P RCBO 30 mA sensitivity as per in accordance with IS12640-2 & IEC 61009-1, of Model No.DHBMACTN8030040 of Havell's Make or its equivalent with necessary connections and all accessories complete | — | — | — | 9,546 | |
| — | 24.00 | — | — | ||
| Supply of Bimetallic (aluminum and copper ) Cable Lugs for 25 sqmm size cables | — | — | — | 696 | |
| — | 24.00 | — | — | ||
| Supply of Bimetallic (aluminum and copper ) Cable Lugs for 70 sqmm size cables | — | — | — | 1,344 | |
| — | 24.00 | — | — | ||
| Supply of Bimetallic (aluminum and copper ) Cable Lugs for 120 sqmm size cables | — | — | — | 1,632 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022.pdf
ATTACHMENT
GCCCorrectionSlips1to11_compressed.pdf
ATTACHMENT
Earthing Specification
ATTACHMENT
RitesInspectionLetter.pdf
ATTACHMENT
TenderNoNEDE17202627TRDDepotCPSN.pdf
ATTACHMENT
TechCircular05-2022provisionofearthelectrodesearthing3_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .