Special Repair Of Certain Roads At Mil Stn Mount Abu

Amount

Scarifying or picking graveled, macadam or bituminous macadam surface in area not exc 400 sqm and exc 50mm deep but n.exc 100mm deep.

Material and labour for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of granite trap or basalt of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required and gradient with 8 to 12 tonne power roller as specified.

Preparing top surface of WBM by brushing with wire brushes for removing caked mud etc, sweeping with brooms & finally fanning the cleaned surface with air compressor to remove all loose dirt and applying evenly a tack coat @ 10 Kg per 10 Sqm of cutback bitumen and material and labour for providing 40mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5 % binder content by weight of total mix using VG-30 paving bitumen, with mechanical paver, mixed in hot mix plant, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller or vibrant roller as specified an directed.

Preparing black top surfaces by bushing with wire brushes for removing caked mud etc, sweeping with brooms & finning the cleaned surface with air compressor to remove all loose dirt and applying evenly a tack coat @ 5 Kg per 10Sqm of paving bitumen of VG-10 and material and labour for providing 30mm thick (consilidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5 % binder content by weight of total mix using VG-30 paving bitumen, with mechanical paver, mixed in hot mix plant, rolled and compacted to required camber and gradient with 8-12 tonne power roller or vibrant roller all as specified and directed. Note :- (a) VG-30 Paving bitumen content beyond 5.5 % if required on account of design mix shall not be paid and shall be deemed to be included in unit quoted rate. (b) Paving bitumen content less than 5.5 % shall be adjusted as per rate of serial item No 3 here-in-after. (c) Srl item No 01 shall not be payable under the area resurfaced vide serial item No 02.

Demolition of cement concrete in ground floors and paving nexc 15cm thickness(below or above ground level)or removing from site complete all as specified and directed.

Material and labour for plain cement concrete,1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in fixing of hold fast, copings, apex stone, bed plates, plinth courses and the like finished fair and even, including necessary form work complete all as specified.

Supply and fixed in repair on existing road solar studs length 132.5mm, width 122.5 mm, height with stump 55mm stump dia 26mm electronically operated with solar cells LEDS pcs Battery NI-CD 1400 AE main frame aluminium bottom frame reflective frame polycarbonate fixed with epoxy of approved make all as sper manufacturer's instructions and repair to existing road surface complete all as specified and directed by Engineer-in-Charge.

Supply & Fixed in repair speed breaker of size 250x350x50 mm having 4 holes including 4 nails and fixed in epoxy compound complete all as specified and directed.

Supply and fixed in repair dual (62 beads minimum) cat eye alluminium casted body of size 100mmx100mm having ABS plastic strip containing 62 mini retro reflective glass beads of colour white/red/yellow on both sides(minimum 31 beads on each side) fixed complete with steel zinc plated nails/stud of dia 12mm and of length 120mm, complete all as speified and directed as approved by AGE(I).

Material and labour for painting lines, dashes,arrows, letters etc on roads, pavements and the like exceeding 10cm wide with retro reflective Thermoplastic road marking Paint (white or golden yellow colour) complete.

Choudhary Traders and Engineers

Haritwal traders