RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled Yes Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Crawler Hydraulic Excavator ( 1 pieces ) Technical Specifications * As per GeM Category Specification 1/11 Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Conforming IS/ISO 7135:2009 Hydraulic Excavator (Crawler) Yes Yes Make - * Model - * Type of the excavator Crawler * Operating mass 2300 More than 2300.0 Or higher Shipping mass 2300 More than 2300.0 Or higher Engine manufacturer and model - * Ignition type Diesel Diesel
RequiredSpark Ignition Type of cycle 4 Stroke 2 Stroke
Required4 Stroke Aspiration mechanically turbocharged * No of cylinders 2 * Bore 91.4 * Stroke 127 * Displacement (cc) 1670 * Max Engine horsepower 28 Any applicable numeric value Maximum Engine torque (Nm@rpm) 106.89 Any applicable numeric value Engine cooling system Liquid cooled * Type of fuel Diesel * Starter type - * Electrical system voltage (in volts) 12 * Bucket capacity to handle material of density 0.07 Any applicable numeric value ISO net flywheel power at given engine speed (hp@rpm) 28 Any applicable numeric value Maximum swing speed 11 Any applicable numeric value Reach at ground level 4040 Any applicable numeric value Depth reach 2323 Any applicable numeric value 2/11 Travel speed 3.27 Any applicable numeric value Gradeability (degree) 30 Any applicable numeric value Force at bucket curl at the Tip 1890 Any applicable numeric value Stick crowding force 1300 * Ground Pressure 0.3 * Operating weight 2300 Any applicable numeric value Draw bar pull 12 * Standard Boom 1900 Any applicable numeric value Standard Arm 1000 Any applicable numeric value maximum digging depth 2323 Any applicable numeric value maximum digging Reach 4188 Any applicable numeric value Rated Lift Capacity 1000 Any applicable numeric value fuel tank capacity 37 Any applicable numeric value Certification Vehicle Certification ARAI/VRDE/ICAT No * If No
Requiredmention the name of Vehicle Certification agency - * Vehicle Certification name and date - * Compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR rules Yes * Availibility of test report for the product from Any ILAC/NABl accredited/central government lab to be furnished to buyers on demand Yes * Responsibility of Registration with RTO Yes * IS/ISO 6165 : 2006 Earth moving Yes * 3/11 machinery - basic types - Identification and terms and definitions IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Part 2 base machine Yes * IS 11114 : 2006 Earth- moving machinery - Definitions of dimensions and codes: Equipment and attachments Yes * IS13116 : 2006 Earth- moving machinery -Engine Test Code - Net power Yes * Construction Parameters Overall length 4041 * Overall width 1450 * Overall heigth 2368 * Overall transport length 4041 * Width of upper structure 1350 * Track overall length 1730 * Track overall width when retracted 1400 * Track overall width when extended 1400 * Track shoe width 280 * Centre to centre - idler to sprocket 1300 * Upper structure ground clearance 610 * minimum ground clearance 291 Any applicable numeric value Tail swing radius (standard) 1250 * Tail swing radius (counterweight) 1250 * Backfill Blade height 320 * Backfill blade width 1450 * Backfill blade rise above ground 367 * Backfill blade dig depth 385 * 4/11 Maximum Cutting height 3961 * Maximum Loading height 2677 Any applicable numeric value Minimum Loading height 0 Any applicable numeric value Maximum vertical wall digging depth 3961 * Hydraulic pump system type - * Hydraulic pump flow at given pressure (L/hr) 3816 * Hydraulic pump flow at given speed (L/hr) 3816 * Hydraulic system fluid capacity 70 * Hydraulic system output 70 * Cooling systsem fluid capacity 7.5 * engine crankcase fluid capacity 5 * pump drive fluid capacity 70 * Swing reduction 0 * Swing circle lubrication - * Swing lock - * swing drive fluid capacity 0 * Filteration system - * Fuel filters - * Air Cleaners Yes * Type of Steering Power * Type of braking system Hydraulic * Type of final drive Planetary * final drive fluid capacity 1.6 * Type of Track - * Track dimensions 1730 * Ground Contact area 0.7667 * Number of shoes on each side 36 * 5/11 Number of carrier rollers 2 * Number of track rollers 6 * Cab height 2368 * Crawler track height 430 * Clearance height under upper structure 610 * Undercarriage overall width 1400 * Shipping height 2368 * Shipping height with guard rail 2368 * Shipping length 4041 * tail swing radius 1250 * Length to centre of rollers 1300 * Counterweight clearance 610 * Right-side upper structure distance from axles of rotation 675 * cab width overall 850 * Track gauge with track extended 1120 * track gauge with track retracted 1120 * Crawler overall length 1730 * Sprocket axis to axis of rotation (in degress) 90 * Upper structure rearmost distance from axis of rotation 1828 * Maximum dumping height for shovel 2677 * Length of level floor cut 975 * Minimum level floor radius 1961 * Muffler with rain cap Yes * Fuel Consumption for Earthwork application 3 * Maximum dig radius 4188 * Dig radius at groundline 4040 * 6/11 Maximum dig depth 2323 Any applicable numeric value Vertical straight wall dig depth 2323 * Dump height 2677 Any applicable numeric value Overall reach height 4188 Any applicable numeric value Bucket rotation 1250 * Arm digging Force 1300 * Bucket Digging Force (ISO) 1890 Any applicable numeric value Stick Digging Force (ISO) 1300 Any applicable numeric value Bucket Digging Force (SAE) 1890 * Stick Digging Force (SAE) 1300 * Fully enclosed steel cabin with safety pipes window locking service doors and adjustable cushion seal Yes * Service hour meter Yes * Complete Instrumentation Yes * Starter key switch Yes * 2 working light and cabin light Yes * Electric Horn Yes * Parking brakes Yes * Emergency shut off Yes * Cabin/canopy :All round visible cabin
RequiredWith easy Walk Through Access Yes * Instrument Panel Yes * Cabin Instumental panel with audio indicators Yes * Cabin Instumental panel with visual indicators Yes * Seating Plan: Co- Adjustable driver seat with one helper seat No * 7/11 Doors:-Front door with fixed toughened glass & locking mechanism with wiper No * Glasses:-Front wind screen
Requiredrear glass in two pieces glass No * Paint:Standard automobile paint to the exterior body as per CVMR rules Yes * Rear view large convex mirror No * Front screen wiper No * Front and rear horn Yes * Number of roller 8 * Lift Path Yes * Cabin Entry and Exit Yes * Operation Control Yes * Length Without Attachment 2115 * Performance Parameters ISO net engine power (HP@rpm) 28 * Maximum travel speed (high) (km/hr) 3.27 * Maximum travel speed (low) (km/hr) 1.64 * Braking performance - * Tipping Load (kN) 100 Any applicable numeric value Digging Tool used Hoe * maximum force by Shovel/hoe/clamshell using arm cylinder (kN) 12.748 * maximum force by Shovel/hoe/clamshell using bucket cylinder (kN) 18.534 * Warranty time 1 * Operating hours during warranty period 2000 Any applicable numeric value Battery warranty 1 * No Of Free services 4 * Transportation charge 150000 * 8/11 (in Rupess) Maintenance cost for first 5000 Hrs (in Rupees) 175000 * Excavator Self propelled machine on crawlers having an upper structure capable of 360 degree swing and with mounted equipment which is primarily designed for excavating with bucket without movement of undercarriage during work cycle Yes * Work cycle normally compromised excavating
Requiredelevating
Requiredswinging and discharging of material Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
