Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.2 LAccepted-AOC | L1 | Accepted-AOC Low rate | |
| 2 | L2₹14.8 L+₹56,108.53 (3.94%)Rejected-Finance | L2 | Rejected-Finance Reject |
Tender Value
Refer Docs
EMD Value
₹17,000
Closing Date
16 Dec 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
E O
Melachokkanathapuram Town Panchayat
Improving the B Karattupatti B Dharmathupatti B Renganathapuram and Melachokkanathapuram Burial Grounds
2024_DTP_507078_1
342/2024
Open Tender
Civil Works
Works
180 days
Melachokkanathapuram Town Panchayat
As Per Tender Document
3 documents required · 3 mandatory
₹0
₹17,000
Yes
Melachokkanathapuram Town Panchayat
16 Dec 2024
3 Dec 2024
16 Dec 2024
3 Dec 2024
16 Dec 2024
3 Dec 2024
3 Dec 2024 - 16 Dec 2024
9 Dec 2024
Amount
Earth work excavation in all soils and sub soils exceipt hard rock requiring blasting with intial lead and lift including re-filling the sides of foundation in layers of 15cm thick watering, ramming, depositing the surplus earth in the premises as directed by departmental officers etc., complete asper standard specification. as per SS 20 B TNDSS NO: 23 & 24 VI (s2), VII 9,10
Plain Cement concrete Using 1:4:8 mix (one cement, Four sand Eight aggregates) using 40mm ISS gauge HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, consolidating and curing etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V, VI (S5A) VII
Supplying and erecting Centering for sides and soffits including supports and strutting upto 3 M height for plain surfaces such as RCC Slab. Rectangular beams,. Tee Beam (or) L Beams Lintel,.Bed Block, Slabs landing slabs square or round column etc., as detalied below with all cross bracings using M.S.Sheets of size 90 cm x 60 cm and BG 10 stiffened with welded M.S.Angles of size 25x225x3 mm for boarding laid over silver oak or countrey wood joists of 10cm to 13cm dia spaced at an intervals of 75 cm c/c etc., complete complying with standard spefication as directed by departamental officers TNDSS NO: 30& 86 Plinth Beam/Plane Surface
Square Column
Circular Surface
Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -
Supply and fabrication and placing in position of TMTsteel roads to required size and length as directed by the departamental officers including cost of binding wire, cutting, bending and tying etc., inclduing cost and conveyance of all materials to side and all labour charges etc., complete as per standard specification TNDSS NO: 97 V.VI (S6) VII (S^) VII-3
Brick work in Cement mortar 1:5 (One Cement Five Sand) mix using country bricks of size 8-3/4x4 1/4" x2 3/4" including all cost and conveyance of all materials as per Standard Specification TNDSS NO: 31 & similar to 31C V, VI (S5) VII
Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.
Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two M- Sand and four aggrigate) using 10 to 12mm stone chips – 25mm tk etc., Complete.
Plastering with Cement mortar 1:5 (one cement five sand) mix 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing laying and curing etc complete complying with std specification TNDSS No: 56 & 57
Painting with Two Coats with Weather sealed Exterior emulsion Paint as instructed by the departmrntal officers including Preparation of surface curing, etc complete in all floorscomplying with standard specification. ( The Colour and shade of the paint shall be got approved by the departmental officers.)
Painting with Two Coats with Syntetic Enamel Paint as instructed by the departmrntal officers including Preparation of surface curing, etc complete in all floorscomplying with standard specification. ( The Colour and shade of the paint shall be got approved by the departmental officers.)
Flushing of borewell of 6” dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by ‘V’ notch method if required - 600 Cfm ( 100 /150 PSI)
Geoligical survey report inculding all other charage etc., complete
Drilling of 140 mm dia Bore well in hard rock area to any required depth as decided by the Departmental officers including Transportation from one place to anothr place with in Tamilnadu State by direct method using contractor's rig tools at the site shown by the Departmental Officers including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification
Supply and erection of 150 mm dia PVC Casing Pipe (CM) of approved quality to require depth including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification
Supply and delivery of 2HP Single phase Submergeble Pumpset as per Is 8034 with out Panal Board including all labour charges etc., Complete (20 Lpm x 150mHead)
Supply and delivery of 2 HP Single phase Panal Board With two level gurd and Auto Start including all labour charges etc., Complete.
Supply and delivery of pipes and pipes specials including all charges etc.,Complete 32mm dia HDPE Pipe Class-5 (1 MPa or 10 kg./cm2 pressure)
4 Sqmm 3 core Flat cable for Borewells
Nylon Rope for Borewell
32mm GM Non Return Valve
32mm GM Gate value
GI Bore Cover
GI Clamp Set
20mm GI Pipe
20 mm GI Elbow
20mm GI Tee
20mm GI Coupler
20mm GI Union
20 mm Waste Not Tap
1000L HDPE Tank
Labour charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, Three pilot (indicating) lamps capacitor single phasing preventor, Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days
Supply and run of 2 of 4 sqmm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD 65)
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 70)
Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 125)
Supply and fixing of 65mm dia GI pipe (Class 'B') of 4 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom and with concreting and construction on masonary pedestal with MS box of 30cm x 20cm x 10cm with angle iron frame work with door with lock and key arrangements and with supply and fixing of 30 W LED street light fitting with bulb and fixing of 1 No. 70W SV lamp and with supply and fixing of 16A fuse unit, (500V), 5A SP switch inside the MS box and painting with suitable colour (SD 99)
Supply and clarnping of 2 x 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 193)
Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD 181)
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 211)
Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End (SD 564)
Providing Seater arrangements with 1200mm Length 600mm Width 50mm thick Cuddapah slab and Side brick walls 230mm thick, 600mm height and Plastered with C.M. 1:5, 12mm thick, Emulsion painting two coats. The cost shall include base concrete and all labour and materials and as directed by the departmental officers.
PANDIYAN R (BID ID -1211184)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .