Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bid | |
| 2 | L2₹24.4 L+₹67,520.30 (2.84%)Rejected-Finance | L2 | Rejected-Finance Other than lower | |
| 3 | L3₹25.4 L+₹1.6 L (6.73%)Rejected-Finance INDEX NO B 33 NC R O KRALPORA DISTT BUDGAM SRINAGAR J K 190019 | SRINAGAR | BUDGAM | JAMMU AND KASHMIR | 190019 | L3 | Rejected-Finance Other than lower | |
| 4 | L4₹26.4 L+₹2.6 L (10.9%)Rejected-Finance | L4 | Rejected-Finance Other than lower | |
| 5 | L5₹27.7 L+₹3.9 L (16.4%)Rejected-Finance | L5 | Rejected-Finance Other than lower |
Tender Value
₹26.1 L
EMD Value
₹52,280
Closing Date
16 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engrs
HQ 134 Wks Engrs PIN 914134 c/o 56 APO
PROVN OF BATHROOMS WITH TOILETS AND ALLIED INFRA AT OAF UNDER GE 970 EWS
2022_MES_516652_2
134 WE-05(T)/2022-23
Open Tender
Civil Works - Others
Item Rate
180 days
Srinagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 970 EWS
₹52,280
Yes
27 May 2022
2 May 2022
18 May 2022
2 May 2022
16 May 2022
9 May 2022
2 May 2022 - 5 May 2022
60 days
Amount
Excavation in trenches in soft/ loose soil not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits,manholes, pier holes, laying of pipe/ cable complete all as specified and directed by Engr-in-charge.
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed by Engr-in-charge.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, complete all as specified and directed by Engr-in-charge.
Formwork to sides of concrete foundations, footings, bases of columns, plinth beams, sides and soffits (if any) of plinth beam similar work, vertical surfaces for rough finish surfaces of concrete, complete all as specified and directed by Engr-in-charge.
Formwork to sides of rough finished surface of concrete of square, rectangular or polygonal to sides of columns, pillars etc. complete all as specified and directed by Engr-in-charge.
Formwork to rough finshed surfaces of concrete of sides and soffits of floor or roof beams, lintel beam, cantilevers, shelves including supports, overhangs, etc, complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (Design Mix) as in foundations, including rafts, footings foundation beam, plinth beams, bases for columns etc. basement slabs, piles and mass concrete, complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (Design Mix) as in columns, pilars, peir, posts and struts, complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (Design Mix) as in beams, cantilivers, bressummers, lintles over 1.5 mtr span, complete all as specified and directed by Engr-in-charge.
M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-charge.
All as per Ser item No 10.00 above but TMT bars 5mm and over upto and includidng 10mm dia as in stirrups, spaces and binders etc. complete all as specified and directed by Engr-in-charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed by Engr-in-charge.
Removing excavated material to a distance not exc. 50mtr and depositing where directed to a level not exc. 1.50 mtr above starting point, complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class "B" bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class "B" bricks, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4, complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge.
M&L for plastering 15mm thick in two layers of 10mm thick and 5mm thick respectively with and including liquid WPC in CM 1:4 on fair faces of brick wall or on concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge.
M&L for preparation of new palstered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting primer, complete all as specified and directed.
M&L for preparation of new palstered surfaces of walls and applying two coats of cement base paint over a coat of wall primer, complete all as specified and directed.
M&L for mild steel rolled sections as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, confirming to Fe 410-W (Gde E- 250) quality A, complete all as specified and directed.
S&F MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc, confirming to Fe 410-W (Gde E- 250) quality A, complete all as specified and directed.
S&F mild steel bolts (machine made)16-20mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 30cm long, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing,
S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing,complete all as specified and directed.
S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.
M&L for 1st class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed at site, complete all as specified and directed.
S&F 30mm thick flush shutters, solid core construction with particle board core and plywood face panels commercial type on both sides, if one face is covered with decorative face veneer with lipping/ frame to match face panels, commercial type on both sides complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed.
S&F aluminium alloy handles, fabricated type, anodised, 150mm size.
S&F aluminium anodised, barrel tower bolt of extruded section, 200mm length of bolt, complete all as specified and directed.
S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section, complete all as specified and directed.
M&L for moorum/ red bajari, filling in floor or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering and consolidation, complete all as specified and directed by Engr -in-charge.
M&L for hard core of broken stone/boulders of gauge not exceeding 63mm etc, complete all as specified and directed.
M&L for hard core of broken stone/boulders of gauge exceeding 63mm but not exc 100mm, spread, levelled in layers not exc 15cm thick, watered and rolled/ ramped to a true surface, complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in subbase of floor, finished the surface fair and even, complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B-1 (using 40mm graded crushed stone aggregate) as in level course, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7-8mm thick, area of each tiles exc 0.06 Sqm but not exc 0.11 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for Glazed ceramic coloured tiles of size 300mm x 200mm x 6-7 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10mm thick rendering in CM 1:3, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls with suitable clamps, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or floor, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or floor, complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
S&F 75mm bore PVC (SWR) vent cowl.
S&F PVC (SWR) floor trap 75mm size, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.
S&F HDPE rotational moulded polyethylene water storage tank (three layered) cylindrical vertical with closed top of capacity 2000 litres, hoisted and fixed in position with connecting ports (inlet, outlet and over flows), and including float valve high pressure with polythene float and fly nut suitable foer 20mm bore GI pipe/ nipple, complete all as specified and directed by Engr-in-charge.
S&F HDPE rotational moulded polyethylene water storage tank (three layered) cylindrical vertical with closed top of capacity 1000 litres, hoisted and fixed in position with connecting ports (inlet, outlet and over flows), and including float valve high pressure with polythene float and fly nut suitable foer 20mm bore GI pipe/ nipple, complete all as specified and directed by Engr-in-charge.
S&F 15mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F 15mm bore stop valve of PTMT of any colour, high pressure, screwed for iron pipe and fixed (Minimum weight 90gms, complete all as specified and directed.
S&F grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.
S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed.
S&F 15mm bore CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F vitreous chinaware wash town water closet pan (pedestal pattern), white (ETWC) with 'P' or 'S' trap including connection to drain or outgoing pipe and including 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia and 15mm size 450mm long PTMT PVC connection pipe, complete all as specified and directed.
M&L for vitreous China half stall urinal flat back, white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed.
S&F vitreous chinaware squatting pan (orissa pattern), white of size 580mm x 440mm with integral foot rest and complete with 'P' or 'S' trap including connection to drain or outgoing pipe and including 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia and 15mm size 450mm long PTMT PVC connection pipe, complete all as specified and directed.
M&L for vitreous China wash basin, white, flat back of size 580mmx450mm excluding taps, waste, chain and plug & porcelain stopper but including brackets and PTMT based coupling of 32mm bore and waste pipe, complete all as specified and directed.
S&F 15mm size PVC connection with PTMT nuts, length 600mm long, complete all as specified and directed.
S&F 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
S&F swivel shower of PTMT any colour for fixing with 15mm bore pipe (minimum weight 40gms) with shower arm 15mm size, 195mm long with bend of 45 degree & flange of PTMT of any colour, complete all as specified and directed.
M&L for 15mm bore GI water tube, medium grade, fixed to wall, concealed in wall and ceillling or laid in floor/ trenchs complete with fittings (such as bends, elbow, tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed by Engr-in-charge.
M&L for 20mm bore GI water tube, medium grade, fixed to wall, concealed in wall and ceillling or laid in floor/ trenchs complete with fittings (such as bends, elbow, tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed by Engr-in-charge.
M&L for 40mm bore GI water tube, medium grade, fixed to wall, concealed in wall and ceillling or laid in floor/ trenchs complete with fittings (such as bends, elbow, tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed by Engr-in-charge.
M&L for lagging to 20mm bore GI pipe, all round with 40mm thick bounded mineral wool preformed "SNAP ON" pipe section of density 144 KG/ Cum conforming to IS-9842, provided with chicken mesh wire netting 25mm gauge and covering with plaster of paris, complete all as specified and directed.
Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, complete all as specified and directed.
M&L for MS work for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc, conforming to Fe-290-E-165, complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.
S&F gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20mm bore, complete all as specified and directed by Engr-in-charge.
S&F gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 40mm bore, complete all as specified and directed by Engr-in-charge.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in pavement/ plinth protection, laid in alternate bays, finished the surface fair and even, complete all as specified and directed.
M&L for 60mm thick machine pressed precast concrete interlocking paver block of any shape and size, confirming to IS 15658-2006, M-35 Grade over and including 25mm thick dry sand cushioned, complete all as specified and directed.
Providing, cement concrete 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregates) as in rounded or chamfered on edges of tiles, in copings/ bed blocks, complete all as specified and directed.
M&L for cutting, welding and soldering of existing GI/CI pipe line of size 40-50mm bore for inserting Tee including necessary joint etc, complete all as specified and directed.
S&L 150mm bore (internal dia) SGSW pipes, laid and jointed complete with collars, complete all as specified and directed by Engr-in-charge.
M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed by Engr-in-charge.
M&L for precost cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4, complete all as specified and directed.
Construction of RCC septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8, type D-1 below foundation, RCC M-30 Design Mix in walls, base slab, baffle walls and roof slab including beams etc. with vent shaft, manhole openings with cover connection etc. complete with effective depth of 1.5 meter and overall depth of 3 metre for 100 users, complete all as specified and shown on drawing No CESZ/TD-01/2015 Sheet No 1/3, 2/3 dt 22 Feb 2015.
Construction of soakage well, excavation in any type of soil, foundation in PCC 1:3:6, type C-1, walls of honey combed masonry with top ring of M-30 Design Mix cement concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M-30 Design Mix cement concrete / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.6 mtr dia x 4.5 mtr effective depth, complete all as specified and shown on drawing No CESZ/TD-01/2015 Sheet No 3/3 dt 22 Feb 2015.
M&L for point wiring with 1.5 Sqmm copper conductor (multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade wiring in PVC conduit of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts 1.5 sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall, covered with 3 mm thick plastic laminated sheet for one light point/ fan point/ bell point, complete all as specified and directed.
All as per Ser Item No 84.00 above but for 5 Amps socket outlet on independent board.
All as per Ser Item No 84.00 above but for 5 Amps socket outlet on same board.
All as per Ser item No 84.00 above, but for one socket outlet 15 Amp on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and sheathed electric cable 1100 Volt grade including PVC insulated and unsheathed electric cable 1100 volt 2.5 Sqmm copper stranded conductor as continious earth wire connected to common earth dolly, complete all as specified and directed.
S&F switch piano, flush type, 5 Amp, one way, complete all specified and directed.
S&F switch socket combination 2-in-1, 3 Pin, 5 & 15 Amps, flush type universal, complete all as specifed and directed.
S&F switch socket combination 2-in-1, 5 Amps, flush type universal, complete all as specifed and directed.
S&F 20 watt LED 6000K (4 ft) decorative ultra slim, square profile linear LED lighting fixture with extruded polycarbonate, enviroument friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and integrated electronic driver, complete all specified and directed. Make :- Havells/Philips/Bajaj/Wipro
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specifed and directed.
S&F ceiling rose 3 terminal, size 50mm x 65mm, surface type, complete all specified and directed.
S&F 63 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all specified and directed.
S&F 5-32 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all specified and directed.
S&F sheet metal enclosure DB, factory made, double door shutter type for, 240 Volts, 12 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.
S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.
S&F bracket (angle type) made out of 1.5m long GI pipe 40mm bore medium grade with and including 2 Nos 90 degree bends and fixed with mild steel clamps of FI 25 x 6mm including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
S&F exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with blades, and frame and louvers complete all as specified and directed. Make :- Havells/ Cromptom/Orient.
S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.
S&F 9 watt LED lamp, luman efficiency 120 LM/W with 3.5 KV voltage surge protection, wide operating voltage range 100-300 V AC. Make :- Bajaj/ Havells/ Phillips.
Earthing complete with galvanised earth plate electrode of size 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5 Mtr below normal GL, connected to GI wire 4mm dia as earth lead by means of nuts, bolts and check nut and washer, GI light grade protection pipe 15mm bore upto 7.5m, GI watering pipe 20mm bore medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 3 of SSR Part I, including earth test point up to pannel board, complete all as specified or indicated including testing after completion.
S&F electric water heater, storage type steel body with inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe of suitable size, CP bib tap etc, complete all as specified and directed.
M&L for fine river sand as in coushioning to UG cables, 8cm thick before laying the cable and 15cm thick after laying the cable, complete all as specified and directed. Note :- Punned thickness of sand shall be measured.
M&L for brick well burnt locally available sub class "B" laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable, complete all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium cdonductor of size 16 Sqmm 2 Core, complete all as specified and directed.
M&L for 50mm bore GI tube light grade with all fitting, laid in trenches/ under road/ floor and alongwith pole for protection of cable, completed all as specified and directed.
M/S SHOWKAT AHMAD WANI AND SONS
G N Constructions
M/S GHULAM HASSAN KUCHAY
SOFI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .