Repairs to Aluminium/wooden doors and windows in FBTR Complex at IGCAR, Kalpakkam during the year 2026-2027.

Providing and fixing Swing type heavy quality top PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-Charge.

Providing and fixing Swing type heavy quality bottom PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-Charge.

Providing and fixing 4 Lever Dead/Mortice Lock ‘Godrej/Everite’ or other approved equivalent make suitable for aluminium door with a pair of keys complete all as per specification and drawings.

Providing and fixing double action floor spring of ‘Hardwin’ or approved brand and manufacturer (confirming to IS:6315) for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece of M.S Sheet outer box with slide plate etc. complete as per directions of Engineer-in-Charge with brass cover plate.

Providing and fixing glazing with 5mm thick clear Float glass pane in aluminium doors, window, ventilator shutters and partitions etc with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the Engineer-in-Charge.

Providing and fixing ISI marked (IS:205) aluminium butt hinges of size 125 x 75 x 4mm of approved make anodised (anodic coating not less than grade AC 10 as per IS:1868) ransparent or dyed to required colour or shade with necessary screws etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts Everite/ Hardwyn or approved equivalent make complete as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5mm (heavy weight) GARG or equivalent approved make with suitable stainless steel screws etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing IS:12817 marked stainless steel butt hinges of size 75 x 50 x 2.5mm (heavy weight) GARG or equivalent approved make with suitable stainless steel screws etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and and directions of Engineer-in-charge including making provision for fixing of fittings wherever required. (fittings, Glazing and panelling shall be paid for separately) Note : 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.