SPL REPAIR WORK TO BLDG NO P1F (SERVENT QTR), SPL REPAIR WORK TO BLDG NO MES 07 (OR LIVING ACCN) OF 100 FD REGT AND SPL REPAIR TO WATER SUPPLY DISTRIBUTION NETWORK IN OTM ACCN AND JCOS/OR FAMILY QTRS AT ARMY CAMP JAMSHEDPUR UNDER GE RANCHI

Amount

Removing/taking down of old water proofing treatment from roof/concrete surface removal to distance exc 250mtr and not exc 500mtr from the site & cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specefied and directed.

Demolition of cement concrete of any description and in any position complete all as specefied and directed .

Brushing neat cement slurry with 3kg of cement per sqm.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete all as specefied and directed. .

M&L 25 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor using liquid water proofing compound to make surface in level, complete all as specefied and directed. (liquid WPC shall be measured seperatly).

M&L providing, cement concrete 1 : 2 : 4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges with using water proofing compound, complete all as specefied and directed.(liquid WPC shall be measured seperatly)

M&L bedding layer of mortar 10mm thick finished fair and even in CM 1:4 mixed with liquid water proofing compound (liquid WPC shall be measured seperatly).

Supply only liquid water proofing compound

M&L Cleaning plastered roof surface and applying a coat of Oxidised bitumen based solvente primer @ 0.3 kg/Sqm of approved make on top of dry surface of RCC roof, complete all as specefied and directed. .

M&L for applying a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm including cleaning surface before laying of APP Membrane.

M&L APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with torch sealing with lap of 100mm and the overlap shall be selaed by flame complete all as per manufacturer instructions and as directed by Engr-in-charge.

M&L applying protective coating with bituminous based aluminium/Heat resisting paint in two coats complete.

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter (without taking of shutter from framed) complete incl removing from site.

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4 Sqm each with shutter (without taking of shutter from framed) complete all as specefied and directed.

M&L Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specefied and directed.

M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.

M&L Providing, cement concrete type B-0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work, complete all as specefied and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making dismantaled portion in CM (1:3) or cement concrete 1:2:4 Type B-1,depth of embedded portion of holdfasts not exc.half brick, complete all as specefied and directed.

S&F mild steel works as in small articles like hold fasts, conforming to Fe-290 or Fe E-165, complete all as specefied and directed.

S&F factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2 mm thick prelaminated Moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F Factory made solid panel PVC Skeleton door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;wire gauzed i.e. panel will be of wire gauze,The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S.tubes. The wire gauge shall be stretched to tighten firmly.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2020) .

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165, complete all as specefied and directed.

S&F aluminium anodised aluminium window shutter Sliding type with frame of anodised aluminium channel section suitable for sliding aluminium shutters weighing not less than 0.55Kg/M including necessary joining cleats glazing clips rubber packing anodised aluminium shop beading screws with two shutter Including 3.5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc, complete all as specefied and directed.

S&F aluminium anodised aluminium ventilator shutter Sliding type with frame of anodised aluminium channel section suitable for sliding aluminium shutters weighing not less than 0.55Kg/M including necessary joining cleats glazing clips rubber packing anodised aluminium shop beading screws with two shutter Including 3.5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc,complete all as specefied and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specefied and directed.

S&F butt hinges 100mm long medium weight cold rolled MS complete all as specefied and directed.

S&F extruded aluminium alloy butt hinges 100mm size type B-21, complete all as specefied and directed..

S&F 150 mm long aluminum anodized barrel tower bolt extruded section.

S&F 100 mm long aluminum anodized barrel tower bolt extruded section.

S&F aluminum handles cast type anodize 150 mm long, complete all as specefied and directed.

S&F aluminum handles cast type anodize 75 mm long, complete all as specefied and directed.

S&F 300 mm long of bolt Mild steel sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specefied and directed.

S&F for 300mm ordinary rat tail rod pattern springs including roller and roller plate of Brass, complete all as specefied and directed. .

Taking up or down steel tubing and connection of 15 mm bore, complete all as specified and directed.

All as Ser No 36 above but for 20 mm dia bore pipe.

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc, complete all as directed at site for 15 mm bore all as specified.

All as above item No 38 but for 20 mm dia

Roughening sufaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust.

Taking out cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specefied and directed.

M&L 15 mm thick screed bed or bedding layer in CM (1:6) to receive floor finishes, complete all as specefied and directed.

M&L non skid coloured Jointless Ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floor etc;set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, complete all as specefied and directed. .

M&L non skid coloured Jointless ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.18 sqm but n.exc 0.38 sqm in floor etc;set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specefied and directed. .

All as item Ser No 45 above but in vertical surfaces

M&L 10 mm thick cement plaster in CM (1:4) for backing of tiles, complete all as specefied and directed. .

M&L coloured glazed ceramic tiles in vertical surface 300x450x7to8mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces, complete all as specefied and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings,heads, shoes,bends,swan-necks,etc including removing from site.

M&L 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls/floors including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4), complete all as specefied and directed.

M&L 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls/floors including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4), complete all as specefied and directed.

S&F PVC (SWR) bends 110 mm bore of any radius .

S&F PVC (SWR) bends 75 mm bore of any radius .

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door ..

S&F 75 mm bore PVC (SWR) vent cowl.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement, complete all as specefied and directed.

S&F 110mm dia PVC (SWR)WC connector with lip ring.

Demolition and breaking up drain pipe 100 mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) sat in cement mortor.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil.

Removing exavated soild n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point.

M&L for 150 mm dia of reinforced concrete pipe, class NP2, laid and jointed complete with collars.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone agg for concrete bed to drain pipes including , packing under and haunding against the sides of pipe, after they tested for 150 mm dia pipe.

Brickwork or stone / boulder masonary, built in cement mortar including all quoins, arches ,pillar, etc but excluding ashlar facing, dressed stonework and precast concrete articles.

M&L brick work using sub class B bricks straight of curved on plan exc 6m mean radius built in CM (1:4), complete all as specefied and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall built in CM (1:4), complete all as specefied and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed plate etc complete all as specefied and directed. .

M&L precast cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in cover slab, shelves, and similar work set in CM, complete all as specefied and directed.

M&L cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc complete all as specefied and directed.

M&L mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces fair and even without using extra cement in CM (1:4) with W.P.C (W.P.C will be measured and paid separately) complete all as specefied and directed.

S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specefied and directed.

S&F in repair 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specefied and directed. .

S&F in repair, 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specefied and directed. .

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specefied and directed. .

S&F in repair for vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest and 's'or 'p trap'complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints, complete all as specefied and directed.

S&F for vitrious china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete .

Supply only pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete.

S&F PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete .

Dismantling water tanks Capacity in exc 250 & n exc 500 litres and removing to store

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed, complete all as specefied and directed.

M&L preparation of old decorated surface of walls by brooming down and wire brushing etc and applying two coats of white wash on wall complete all as specefied and directed. .

M&L Preparation of old plastered or unplastered surfaces of ceiling and applying two coats of white wash to ceiling complete all as specefied and directed. .

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper of approved colour and shade over one coat of putty complete all as specefied and directed.

M&L Complete removal of existing treatment on wall and applying two coats of cement base paint of any colour over one coat primer complete all as specefied and directed.

M&L including preparation of newly plastered wall surfaces and applying two coats of cement base paint of any colour over one coat primer, complete all as specefied and directed.

S&F in repair brass CP tubular towel rail 20mm dia D type 60cm long between flanges, complete all as specefied and directed.

M &L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors, complete all as specified and directed.

M&L for 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles, complete all as specified and as directed.

M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick set jointed and pointed in neat cement slurry in floors complete,all as specified and directed.

Dismantling AC corrugated /semi corrugated sheets in roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling of wall and ceiling boards any thickness including corner fillets.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl 2mm dia G.I. ( upto 1200 mm length ) adjusting level to Purlins/ Rafter, complete all as specefied and directed.

M&L 4mm thick non asbestos designer fibre cement building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping, complete all as specefied and directed.

S & F roof trusses (framed ) trussed, purline , crane gantries , rafter, rails and fastening and heavy brackets framing fast and similar small (beam, Tee, angle , channel plates or flat sections) including distance pieces cleats etc and necessary nuts bolts , rivets, welding, plates etc complete all as specified and directed. Quality confirming to Fe-410-W ( Gde E-250) quality B.

S&F straps, supports or suspenders, hooks for hanging fans , MS plates,nut bolts, hold fast , clamps ,hooks , plate and similar small article etc. confirming to Fe 290 & Gde E-165, complete all as specefied and directed.

M&L for preparation of old painted steel & iron surface of any description n exc 10 cm width or girth when connected with other painting or when painted in different tint applying two coats of synthetic enamel paint over on steel surface.

All as per item No 97 but over 10 cm in width or girth , not otherwise described.

M&L for preparation of new painted steel & iron surface of any description n exc 10 cm width or girth when connected with other painting or when painted in different tint applying two coats of synthetic enamel paint over one coat of red oxide zink chromium primer on steel surface.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Demolition of cement concrete (Un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level)

M & L PCC 1:3:6 type C-2 , using 20mm graded aggregates as in 75mm thick plinth protection including bitumen joints in 1.0 Mtr centre to centre as required.

Demolition of Brick work or stone masonry built in cement mortar.

M & L Brick work with sub class `B` bricks straight or covered on plan any radius built in cm 1:6, complete all as specefied and directed.

M & L rendering in cement mortar (1:6) , 15 mm thick on fair faces of brick work / Concrete /stone surfaces finished even & smooth without using extra cement, complete all as specefied and directed.

M&L Cement concrete type C-1 (1:3:6) 20mm graded stone aggregate as in bed block of hold fast, complete all as specefied and directed..

M&L rolled sec as in framing for door chowkat fixed with angle plate and connecting plate etc conforming to Gde- Fe -290 & Gde E-165, complete all as specefied and directed.

M&L 30 mm thick flush shutters solid core construction,with block board core and plywood face panels,commercial type on both sides complete all as specefied and directed. .

S&F 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F 2nd class hard wood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred with beads for securing glass, etc. size of members of shutters as specified in SSR Part-I, Sec 8, Clause 8.24 (b) .

All as per item Ser No 27 above but in repairs.

S & F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane, complete all as specefied and directed.

All as per item Ser No 28 but 75 mm size.

S&F Small article Such as wooden stopper (cleat) n.exc 200 Cu.cm each of 2nd class hard wood.

S&F mild steel sliding door bolts plate type stone enameled black with bright bolt not less tan 12 mm dia with and including minimum of 6 bolt & nut four on bolt plate and two on staple plate 250 mm.

M & L applying two coats of synthetic enamel paint over a coat of pink primer incl cleaning for new wooden surface.

M&L including preparation of new plastered wall surface sand applying two coats of distemper oil emulsion over plaster of paris putty of 1mm thickness over chalk whiting complete.

M&L including complete removal of existing surfaces and applying two coats of distemper oil emulsion over plaster of paris putty of 1mm thickness over chalk whiting complete.

M&L for PCC/RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching and other similar location with weathering slightly round edges and throating etc required with and incl all necessary form work .

M&L preparation of old wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc.

M&L for machine cut Kota stone slab flooring 20-25 mm thick (square or rectangular size.) over cement screed bed laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specefied and directed.

All as per item ser No 131 above but on vertical surface as dado/ skirting.

M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in C.M.1:4.

M & L rendering in cement mortar (1:3), 10 mm thick on fair faces of brickwork / Concrete /stone surfaces for backing coat of tiles / stone for dado and skirting, complete all as specefied and directed.

S&F 20mm dia Aluminium powder coated as in golden colour finish draft rod, complete all as specefied and directed.

S&F brass chromium plated decorative bracket fixed to wall .

M&L for cement concrete type B-0 (1:2:4) 12.50 mm graded stone aggregate 25 mm thick as in floor finish even and rough to receive topping layer.

Taking down carefully surface copper/ aluminium existing point wiring with wooden battens / PVC conduit (light, fan, socket, bell or power) including fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators etc complete includind removing material from site and making good any disturbed surfaces complete all as specefied and directed.

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated and FR multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade dwawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete including 1.0 sq copper stranded earth wire for all as specified for the following :-

One light/ fan/bell point, controlled by one, one way switch..

One socket out let 3 pin 5 Amps on the same board.

One socket outlet of 3 pin 5 Amp on independent board.

Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade dwawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 15 amp socket outlet controlled by one switch on independent board incl 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board.

Supplying and fixing angle holder, insulated polycabonate body with back plate complete.

Supplying and fixing switch piano flush button single pole one way 5/6 amp complete.

Supplying and fixing switch socket combination two in one 5 and 15 Amps multipurpose flush type universal 240Volts.

Supplying and fixing socket outlet 2 in 1, 5 pin, 5/6 amp, flush type, complete all as specefied and directed.

S & F in repair bell push 5 amp flush type

S & F in repair bell ding dong type 230 v, 50 Hz

Supplying and fixing ceiling rose 63 x 25 mm three terminals, complete all as specefied and directed.

Material and labour for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into existing surface / concealed conduit of nominal size 6 sqmm complete with 1.50 sqmm copper conductor as earth continuity. (Note:- Locations where concealed conduit will be found damaged or submain wiring requires relocation, it will be done by laying new PVC conduit and making it concealed. Cost of conduit is not included in this item). (Note- 3 runs of 6 sqmm wire shall be measure one unit)

Taking down U/S fan regulator and Supplying and fixing hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specefied and directed.

Supplying and fixing integrated LED 18 watt complete all as specefied and directed. Make - Philips or Osram or Wipro as approved.

Supplying and fixing LED tube light fiting 1X18 watts , 230V with 18 watts slim tube Box type epoxy powder coated CRCA sheet housing with reflector cover channel, with bipin holders, connector block etc complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make - Philips / Wipro/ Hawells

Supplying and fixing LED bulk head fitting 1x 9 watt with LED including connection with PVC insulated flexible flat twin core multi stranded copper conductor cable 0.5 sqmm as required, complete all as specefied and directed.

Supplying and fixing SPN 240 Volts, 4 way powder coated, CRCA steel sheet MCB distribution board double door (minimum thickness 1.2 mm & constructed as per IS : 8623), degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required. Make:Legrand / L&T (Hager) or HPL as approved.

Taking down U/S MCBs/ELCBs with incoming and outgoing controls any make, any capacity after disconnecting, complete all as specefied and directed.

S &F MCB SPN 6A to 40A 240V 9KA

S&F MCB SP 6A to 32A 240V 9KA

Supplying and fixing in renewal PVC insulated and sheathed three core multi stranded copper conductor flexible cable of size 0.5 sqmm complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Taking down carefully aluminium submain wiring with wooden battens / PVC surface conduit and making good disturbed surfaces complete all as specefied and directed.

Taking down U/S wooden board off any sizes

Taking down U/S service connection with suspension wire and S/F twin core PVC insulated and PVC sheathed cable 10 Sqmm with aluminum stranded conductor in service connection suspended by insulated hangers and not more than 1.0 Mtr apart and including 4mm dia suspension GI wire etc complete all as specefied and directed.

S&F House service bracket (hook Type)Complete with 3.0 M long GI Pipe 40mm dia med grade with 2 Nos 90 degree bends M S Hook and stay or guy

Dismantling house service bracket any type

Excavating in trenches not exceeding 1.5 wide and not exceeding 1.5 mtr in depth in soft/ loose soil for laying of pipes and getting out, complete all as specefied and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil, complete all as specefied and directed.

Removal of surplus soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specefied and directed.

M&L taking up/ down of GI pipes including all fitting from trenches/walls /floors and connections etc complete all as specified and directed.

15 mm bore dia

20 mm bore dia

25 mm bore dia

40 mm bore dia

50 mm bore dia

80 mm bore dia

100 mm bore dia

CI/DI 100 mm bore dia

S&F in replacement tubes,' medium grade', galvanized, with all fittings; laid in trenches of following sizes:

15 mm dia

20 mm dia

25 mm dia

40 mm dia

50 mm dia

80 mm dia

100 mm dia

S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, for following bore dia:Make-Shakti/Scud, for the following bore dia :

15 mm dia

20 mm dia

25 mm dia

40 mm dia

50 mm dia

M&L Bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.)Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) complete all as specefied and directed, upt 150mm bore dia collars, caps and plugs

M&L Rubber gasket joint for flange joint complete all as specefied and directed, upt 150mm bore dia

S&F Replace cast iron sluice valve with flanged ends, confirming to IS-780 type PN-1.6 cast iron body with CI wheel brass spindle, joints with rubber gaskets including bolts nuts and washers complete with ISI mark size 100 mm CI line in position,complete all as specefied and directed.

All as per Item No. 164 above but size 80mm bore pipe

Construction of Brick masonary valve pit chamber of size 1200x1200x1200(internal dimension) including necessary excavtion and earth work in any type of soil,angle iron frame MS sheet cover with locking arrangements incl painting two coats symthetic enamel paint over a coat of red oxide primer, complete all as specefied and directed.

Construction of Brick masonary valve pit chamber of size 900x900x900(internal dimension) including necessary excavtion and earth work in any type of soil,angle iron frame ms sheet cover with locking arrangements incl painting two coats symthetic enamel paint over a coat of red oxide primer, complete all as specefied and directed.

Ductile iron pipe S/S including special Class "k-7"supplied and laid complete 100 mm dia, complete all as specefied and directed.

M/S Anjan Kumar Singh