PETTY REPAIR INCLUDING CONNECTED WORKS IN RESIDENTIAL HOSPITAL AREA AT 7 AFH KANPUR CANTT

Amount

Labour only in adjustment of the float valve or ball valve or lever or handle to without replacement of any part of the high level cistern & OHT of any size complete all as specified and directed by Engr-in-charge.

S&F in repair float valve of PTMT with epoxy coated Aluminum rod &high density plastic ball screwed for iron pipe and fixed weight-142 gm for 15mm dia pipe complete all as specified and directed.

All as per sl item No 2 but 20 mm weight 210 gm bore pipe complete all as specified and directed by Engr-in-charge.

All as per sl item No 2 but 25 mm weight 455 gm bore pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 45cm long PVC connection with two Nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe complete all as specified and directed.

S&F in repair 60cm long PVC connection with two Nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe complete all as specified and directed.

Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture , wall mixture, concealed etc of any description any size by changing washer/ jumper valve etc complete all as specified and directed by Engr-in-charge.

S & F in repair brass face spindle of existing 15mm dia bore concealed stop cock complete all as specified and directed by Engr-in-charge.

S & F in repair brass face spindle (half turn / full turn) of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basin mixture and wall mixture of any description complete all as specified and directed by Engr-in-charge.

S&F in repairs of 32 mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms complete all as specified and directed by Engr-in-charge.

S&F in repairs of 40 mm waste coupling of PTMT (half or full threaded) Minimum weight 40mm-60gms complete all as specified and directed by Engr-in-charge.

S & F in repair chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps complete all as specified and directed by Engr-in-charge.

S&F in repair 125 mm fancy type shower roses brass chromium plated with CP arms for 15mm bore GI pipe complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 13 above but of PTMT with 195mm long bend of 45 degree complete all as specified and directed by Engr-in-charge.

S&F in repairs of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ Sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.

S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms) of Make Prayag cat No 1231or equivalent as approved by GE in writing complete all as specified and as directed.

S&F in repair 15mm dia bore gun metal GATE valve complete all as specified and directed by Engr-in-charge.

S&F in repair 20mm dia bore gun metal GATE valve complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and as directed.

S&F in repairs of soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and directed by Engr-in-charge.

S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe, complete all as specified and directed.

S & F in repair PVC waste pipe 40mm/32mm dia, 90 cm long for WHB/Sink/urinal with cup complete all as specified and directed.

S & F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms ) complete all as specified and directed.

S&F in repairs PTMT Health faucet incl flexible pipe of 1.5m length and fixing brackets and fixed as per manufacturers instruction complete all as specified and directed.

Petty repairs of low level flushing cistern any size/description for repairs of leaking water by adjusting/replacing the washer and adjustment of lever require for making the cistern functional complete all as specified and directed by Engr-in-charge.

Removal of air lock/blockage of water in GI and PPR Tubing 15/20/25 mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-charge.

Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge. Note : Date of cleaning shall be written on tanks by synthetic enamel paint after cleaning

Draining out water from existing PVC water storage tank exc 250 ltr and not exc 500 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.Note : Date of cleaning shall be written on tanks by synthetic enamel paint after cleaning

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste coupling including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm complete all as specified and as directed.

S&F in repair sink made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm as approved by Engineer-in-Charge complete all as specified and directed .

S&F in repairs stainless steel kitchen rack standard size (24x36x10) inch complete all as specified and directed.

S&F in repairs toilet paper holder of Chromium plated complete all as specified and directed.

S&F in repairs of PVC ( SWR) pipes single socketed in any length with rubber ring joints fixed to wall ( 110mm bore) including flat iron claim for proper fixing complete all as specified and directed by Engr-in-charge.

All as per sl item No 34.00 but refixing only including taking down existing old pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of PVC (SWR) bends/Tee 110mm dia complete all as specified and directed by Engr-in-charge.

S&F of 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and directed by Engr-in-charge.

All as per sl item No 37.00 but 20mm dia complete all as specified and directed by Engr-in-charge.

All as per sl item No 37.00 but 25mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs of 75 mm bore sand cast iron drain waste/vent pipes fixed to wall, floor jointed with cement joints complete all as specified and directed.

S&F in repairs of 100 mm bore sand cast iron drain waste/vent pipes fixed to walls or floor jointed with lead joints complete all as specified and directed by Engr-in-charge.

S&F in repairs Cast iron door bends of 75 mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs Cast iron door bends of 100 mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs Cast iron branch pieces, tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with access door complete all as specified and directed by Engr-in-charge.

S&F in repairs Cast iron branch pieces, tee equal or unequal spigot or socket type or with parallel branches to 100 mm dia pipe fitted with access door complete all as specified and directed by Engr-in-charge.

S&F in repairs 75mm dia of outlet cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20 mm gradded stone aggregate complete all as specified and directed by Engr-in-charge.

S&F in repairs of vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to anti syphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.

S&F in repairs of vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling complete all as specified and directed.

S&F in repairs of PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed by Engr-in-charge.

S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (2000 ltr capacity) including providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repairs of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.

S&F in repairs of water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.

Demolition of brick work of any type built in cement mortar in foul / normal condition etc complete all as specified and directed by Engr-in-charge.

M&L for brick work built in cement and sand mortar (1:6) with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick rendering in CM (1:6) on fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick rendering in CM (1:4) on fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.

M&L for rendering 5mm thick in CM (1:3) on fair faces of ceiling surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.

M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1mm thick wall care putty, all as specified and directed.

All as per sl item No 62 but on ceiling complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint, over a coat of primer complete all as specified and directed by Engr-in-charge.

Taking down and refixing of old steel tubing connection in new or old position ( wall etc) including cleaning for refixing bore of pipe 15mm dia including connected GI fittings complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 65 above but 20mm bore of pipe including connected GI fittings complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 65 above but 25mm bore of pipe including connected GI fittings complete all as specified and directed by Engr-in-charge.

S&F in repairs of small fittings galvanised iron medium grade such as socket, elbow, reducer, nipple, tee, union, tank nipple, tank connection and other GI fittings etc of any size for 15mm bore GI (ISI marked) complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 68 above but 20mm GI fitting (ISI marked) complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 68 above but 25 mm GI fitting (ISI marked) complete all as specified and directed by Engr-in-charge.

S&F in repairs of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-charge.

Welding at site in position MS butt hinges and projecting type hinges, exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded n.exc 6mm thick complete all as specified and directed by Engr-in-charge.

S & F in repairs Steel window handles left/right, and peg stay including welding to base plate, pin and handle/brackets complete all as specified and directed by Engr-in-charge.

S & F in repairs extruded aluminum alloy handle, fabricated type, anodized 150mm size,complete all as specified and directed by Engr-in-charge.

S & F in repairs extruded aluminum alloy handle, fabricated type, anodized 75mm size complete all as specified and directed by Engr-in-charge.

S & F in repairs aluminum, anodized, barrel tower bolts of extruded section 200 mm long, complete all as specified and directed by Engr-in-charge.

S & F in repairs aluminum, anodized, barrel tower bolts of extruded section 150 mm long, complete all as specified and directed by Engr-in-charge.

S & F in repairs aluminum, anodized, barrel tower bolts of extruded section 100 mm long, complete all as specified and directed by Engr-in-charge.

S & F in repairs aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engr-in-charge.

S & F in repairs Butt hinges medium weight, cold rolled mild steel 100mm size complete all as specified and directed by Engr-in-charge..

S & F in repairs Butt hinges medium weight cold rolled mild steel 75mm size complete all as specified and directed by Engr-in-charge.

S & F in repairs Hasp and staple 125mm size, safety type, aluminum anodised including bolt to hinge plate complete all as specified and directed by Engr-in-charge.

S & F in repairs 150 mm, ordinary rat tail rod pattern springs of MS including roller and roller plate complete all as specified and directed by Engr-in-charge.

S & F in repairs Door closer hydraulically regulated, aluminium body(die cast), designation No.3, universal type, suitable for door shutters of weight between 61 to 80 Kg, complete all as specified and directed by Engr-in-charge.

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed by Engr-in-charge.

S & F in repairs 150 mm Aluminium floor door stopper anodised hard drawn steel spring complete all as specified and directed by Engr-in-charge.

S&F in repairs of mortice lock brass 4 levers vertical type size of 100 mm with 3 key complete all as specified and directed by Engr-in-charge.

S&F in Repairs Mortice lock with two levers (vertical type) size 100mm , mild steel body complete all as specified and directed by Engr-in-charge.

Easing of wooden door shutters/Almn door/PVC door shutter/Almn window for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt complete all as specified and directed by Engr-in-charge.

Easing of steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-charge.

Refixing Aluminium shutters of any description exceeding 1 Sqm and not exceeding 2.5 Sqm each in the same opening after taking down, easing and adjusting including fixing new top/bottom/side rails and refixing builders hardware as required and renewal of unserviceable screws including bottom rod and all required accesary complete.

S&F aluminium sheet plates of 1.0mm thickness, any size fixed with aluminium alloy screws etc fixed in repairs complete.

Taking down hood of rolling shutter each by making all arrangement like ladder, staging rope, chain & pulley etc carrying out repair works, including replacement of nut bolts & Nails etc replacing defective parts, oiling greasing the mechanical parts including side rails and refixing the same in position and repairing the damaged cemented masonry/concrete to match with the old structure complete all as specified and directed by Engr-in-charge.

S&F in repairs of Ball bearing for rolling shutter as per site requirement complete all as specified and directed by Engr-in-charge.

S&F in repairs of spring wire for rolling shutter each as per site requirement complete all as specified and directed by Engr-in-charge.

S&F in repairs of CP pillar tap 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of of Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms complete all as specified and directed by Engr-in-charge.

S&F in repairs of for bib taps 15mm bore (for iron pipe) cast copper alloy with fancy type chromium plated butter fly handle screwed down including fixed in repairs of complete all as specified and directed by Engr-in-charge.

S&F in repairs of for angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and directed by Engr-in-charge.

S&F in repairs of for PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system. The frame to be fixed with tank by 4 nos PVC nut bolts and arolite complete all as specified and directed by Engr-in-charge. Note: The cover to be provided for 500/1000 ltrs capacity.

S&F in repairs of CP Health Faucet with 1.5mtr long SS tube and hook complete all as specified and directed by Engr-in-charge.

S&F in repairs of colour venetion blind 100mm width of strip complete all as specified and directed by Engr-in-charge.

S&F in repairs of Wall mixture 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of Basin mixture 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repair fancy type chromium plated L bend wall mixer of Cat No 9975 of Make- Prayag or equivalent of make specified complete all as specified and directed by Engr-in-charge.

S&F in repair fancy type chromium plated bib tap elbow operated complete all as specified and directed by Engr-in-charge.

S&F in repair fancy type chromium plated swan neck tap for sink/WHB complete all as specified and directed by Engr-in-charge.

S&F in repair fancy type PTMT swan neck tap for sink/WHB complete all as specified and directed by Engr-in-charge

Hacking out old broken glass (anythickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-charge.

M&L for Sheet glass 3.0mm thick ,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge.

S&F figured/frosted glass 3mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pan complete all as specified and directed by Engr-in-charge.

M&L for Sheet glass 4.8mm thick ,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge.

S&F in repairs of black glass, 5.5mm thick and glazing complete with beads fixed with brass screws size exc 0.50 Sqm each pane complete all as specified and directed by Engr-in-charge.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers size exc 0.50 Sqm each pane complete all as specified and directed by Engr-in-charge.

S&F in repairs of Mirror Cabinet Multi utility (355x 455mm) complete all as specified and directed by Engr-in-charge.

S&F in repairs of corner glass shelf 12" complete all as specified and directed by Engr-in-charge.

S&F in repairs of Aluminium door seal with screw complete all as specified and directed by Engr-in-charge.

S&F in repairs of stainless steel kitchen plate rack of size 24" x30" on walls complete all as specified and directed by Engr-in-charge.

S& F in repairs of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each and removal from site complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 Sqm and n exc 4.00 Sqm each and removal from site complete all as specified and directed by Engr-in-charge.

Taking down of shutters of any description exc 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed by Engr-in-charge.

Taking down of shutters of any description exceeding 2 Sqm complete all as specified and directed by Engr-in-charge.

M&L for 18 to 20mm thick Granite work (table rubbed and polished) of Lakha Red or Telephone Black colour for shelves, counter slabs, floors etc. in 15mm backing of CM (1:4) and pointing with white cemeat (mixed with suitable colour) (1:2)using marble dustwith admixture of pigment to match with shade of granite including demolition of (terrezo/ PCC/granite of any description) including cement mortar bedding but not backing) and removing the rubbish from the complex complete all as specified and directed by Engr-in-charge.

M&L for pressed steel window CRCA frame using profile 80x40x1.25mm thick & openable outside glass pane shutter & openable inside wirmesh shutter included guard bare of 10mm MS square frame complete with fixture & fitting such as box type hinges, peg stays glazing clips and handle, locking arrangement complete all as specified and directed by Engr-in-charge. Note:- 3 mm thick glass pane, SS wiremesh & guard bar/Grill included in above rates & PCC for pressed steel frame will be measured and paid separately.

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast,bencing ,coping etc complete all as specified and directed by Engr-in-charge.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet supplying & fixing in opening as per specification & drawing.

M&L for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelam PVC sheet on the front face & 5mm plain colour PVC prelam sheet on back face and fixed in the frame at site as per specification & drawing including butt hinge,handle,tower bolt,and other fittings complete all as specified and directed by Engr-in-charge.

S&F of Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.

S&F of 35 mm thick flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side complete all as specified and directed by Engr-in-charge.

S&F of factory made glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I, section 8 clause 8.23 (a), in IInd class hard wood, thickness of shutter 35 mm complete all as specified and directed by Engr-in-charge.

S&F Butt hinges, medium weight cold rolled mild steel 100mm complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 200 mm complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.

S&F extruded anodised aluminium alloy handles fabricated type 150mm complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed by Engr-in-charge.

M&L for preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.

S&F in repairs of ‘L’ Bihari hinge for kitchen cupboard complete all as specified and directed by Engr-in-charge.

S&F in repairs of brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F in repairs Particle board 8mm thick, medium density, flat pressed,single layer type or three layer type with BWRtype adhesive, fixed with screws in pelmet boxes or in narrow widths n. exc 15cm each,rebated or flat edged frame work complete all as specified and directed by Engr-in-charge.

S&F in repairs Particle board 12mm thick, medium density, flat pressed,single layer type or three layer type with BWRtype adhesive, fixed with screws in pelmet boxes or in narrow widths n. exc 15cm each,rebated or flat edged frame work complete all as specified and directed by Engr-in-charge.

S&F in repairs Prelaminated particle 12mm thick board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs including teak wood liping complete all as specified and directed by Engr-in-charge.

Extra over rates of block board or veneered particle board for external teak wood lipping 12mm width / Thickness, 6mm thick fixed with nails complete all as specified and directed by Engr-in-charge.

M&L 12 mm thick of size 600x600 mm mineral fibre false ceiling system of pattern classic lite RH 99 (bevelled tegular) of Armstrong or equivalent make and model including grid system using hot dipped galvanised steel section, exposed surface with pre-powder coated capping, main runner and cross runner and to comprise main tee/runner 15mm x 38 mm size (load carring capacity 14 kg/sqm) spaced at 1200 mm centres securely fixed to the structural soffit and flush fitting 1200 mm long cross tee/runner to be interlocked between main runners at 600 mm centre to centre from 1200x 600 mm module, cut sub cross tee/runner 600mm require independent support. Wall angle of size 19mm x 19mm, secured to the periphery of the wall at 450 mm maximum centres. The above grid is suspended at every 1200 mm centre to centre in both direction and starting from wall at the distance 350 mm from wall by using 3.50 mm dia aquiline wire with suitable fasteners and hook clip including taking down existing complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size exc 0.11 sqm but not exc 0.18 sqm in floors laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size exc 0.18 but not exc 0.38 sqm in floors laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for glazed coloured digital ceremic joint free tiles in vertical surface 600X300 /450x300 mm size 7-8 mm thick or as required, set over and cncluding 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M & L for vitrified light shade tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc 0.36 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer complete all as specified..

Demolition of cement concrte in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as directed by Engineer-in-Charge.

M&L 25mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded stone aggregate) as in sub base for floor complete all as specified and directed.

S&F in repair telescopic runner for modular kitchen complete all as specified and directed by Engr-in-charge.

Fixing only in repair soap dish/towel rod/towel rack/glass shelf/looking mirror/towel ring/plate rack/ etc complete all as specified and directed by Engr-in-charge.

Fixing only in repair all type of CP bath/kitchen fittings complete all as specified and directed by Engr-in-charge.

Notes :- 1 (i) The unit rates quoted for above items are aso includes to provide the following workers to execute the above works as well as to attend the complaint assigned by concerned JE. (ii) Contractor is also bound to deploy more man power if required to any of the item to execute the above work. 2. Tradesman & helper required daily (except holiday & Sunday) as under:- (i) Two Plumber with two helper for all plumbing items in Sch ‘A’ (ii) Two Carpenter with two helper or all carpentry related items of Sch ‘A’ (iii) One mason with one helper for all cement related item of Sch ‘A’ 3. The labour as indicated in Note No 2 above shall be supervise by a supervisor of the contractor who will manage all the working labour till the time from 9:00 AM to 5.00 PM. 4. The labour as indicated in Note No 2 above shall be reported to the complaint cell at 9:00 AM and shall be left at 5.00 PM after handing over the receipt obtained from the users regarding attending the complaints. 5. The complaint shall be attended on the same day failing which a recovery of Rs. 500/- per day per complaint shall be made from the contractor's dues. 6. In case of absent of the any worker from the duty a recovery of Rs. 500/- for tradesman and Rs. 400/- for helper shall be made from the contractor's dues. 7. Attendance register shal be maintained by the contractor and same shall be signed by JE concerned everyday and by Engr-in-Charge at his /her surprises check.

M.M.V. CONSTRUCTIONS

J.B.ENTERPRISES