Arumbakkam new site

Amount

Closing of window opening in shleter with Plain colour coated sheet on both sides of the wall with necessary nails/ screws and closing the edges of the sheet with silicon sealant. For opening of size approx 50cmx 70cm

Providing and fixing marine grade 19mm thick ply wood for flooring after removing the existing damaged flooring including fixing to the shelter base with necessary screws/ bold nuts etc complete as directed by the Engineer in Charge.

Providing, laying and fixing to the wooden floor PVC sheet flooring (2mm thick) with SR998 or equivalent adhesive as directed by the Engineer in Charge.

Providing and applying to the shelter panel joints and GI sheet wall cladding joints with silicon sealant as directed by the Engineer in Charge.

Providing, laying and fxing to the truss and purlin frame work colour coated GI corrugated roofing sheet of approved quality and make for roofing of shelter and Plain colour coated GI sheet for cladding of shelter walls with selft tapping EPDM gasket fitted screws as directed by the Engineer in Charge.( sheet thickness 0.47mm)

Felling tree branches,climbers, pushes,small plants spread,grown up,around shelters and towers and disposal of same all complete.

Cutting the tree adjoining the tower and disposal of the same to the corporation dumping ground.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :

With cement mortar 1:4 (1 cement : 4 fine sand).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with Synthetic enamel paint of approved brand and mamufacture of required colour to give an even shade. Two or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade : —

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. A) all kinds of soil