Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹12.1 LAccepted-AOC | L-1 | Accepted-AOC Lowest bidder | |
| 2 | L-2₹13.4 L+₹1.0 L (8.42%)Rejected-AOC | L-2 | Rejected-AOC other than lowest bidder | |
| 3 | L-3₹14.2 L+₹1.9 L (15.0%)Rejected-AOC | L-3 | Rejected-AOC other than lowest bidder | |
| 4 | L-4₹14.6 L+₹2.2 L (17.6%)Rejected-AOC | L-4 | Rejected-AOC other than lowest bidder | |
| 5 | L-5₹14.8 L+₹2.5 L (19.8%)Rejected-AOC | L-5 | Rejected-AOC other than lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
2 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ram G
GE Kaluchak Pin-900673 C/O 56 APO
WELCOME MAINTENANCE INCLUDING PERIODICAL SERVICES TO CERTAIN OFFICERS MD ACCN AT KALUCHAK MIL STN UNDER GE KALUCHAK
2022_MES_535753_1
GE/KC/NIT-28/2022-23
Open Tender
Civil Works
Item Rate
270 days
Kaluchak
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE Kaluchak
₹40,000
Yes
27 Sept 2022
5 Jul 2022
9 Aug 2022
5 Jul 2022
2 Aug 2022
19 Jul 2022
5 Jul 2022 - 12 Jul 2022
Amount
Preparation of old decorated plastered or unplastered surface of walls including cornices, pilasters etc by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of white wash, complete all as specified & directed.
Preparation of old decorated plastered or unplastered surface of ceiling by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of white wash, complete all as specified & directed.
Preparation of old decorated plastered or unplastered surface of walls including cornices, pilasters etc by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc., filling of wall care putty on uneven surfaces and applying one coat of oil emulsion distemper, complete all as specified & directed.
Complete removal of existing treatment of any description from wall surfaces by washing, rubbing down and stopping of distempered/painted wall surfaces and applying 2mm thick wall care putty and painted with two coats of oil emulsion distemper over a coat of primer, complete all as specified & directed.
Preparation of old decorated plastered or unplastered surface of walls (upto double storey building with necessary scaffolding) including cornices, pilasters etc by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of cement base paint, complete all as specified & directed.
Preparation of old decorated plastered or unplastered surface of walls (upto tripple storey building with necessary scaffolding) including cornices, pilasters etc by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying two coats of cement base paint, complete all as specified & directed.
Preparation of old decorated plastered or unplastered surface of walls (upto tripple storey building with necessary scaffolding) by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of weather proof exterior emulsion paint, complete all as specified & directed.
Preparation of old painted wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.
Preparation of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, n exc 1.5 sqm, complete all as specified & directed.
3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads or glazing pins in metal frame in squares not exc. 0.5 Sqm in each pane, complete all as specified & directed.
3mm thick figured glass, pin headed type and glazing with oil putty or wooden beads or glazing pins in squares not exc. 0.5 Sqm in each pane, complete all as specified & directed.
Taking up or down steel tubing and connections 15mm bore, complete all as specifed & directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting exc. 10cm girth but not exc 20cm girth in brick/stone walls, complete all as specified & directed.
Galvanized iron water tubing, medium grade, 15mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
Bib tap, 15mm bore, fancy type, chromium plated, long body with cup, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified & directed.
Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repairs, complete all as specified & directed.
Stop valves, 15mm bore, fancy type, chromium plated capstan head, cast copper alloy, screwed down, high pressure, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.
Stop/Angle valves, cast copper alloy, 15mm bore (concealed type), screwed down, high pressure with capstan head, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.
Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repairs, complete all as specified & directed.
Brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe, fixed in repairs, complete all as specified & directed.
Brass chromium plated central hole WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe, fixed in repairs, complete all as specified & directed.
Stainless steel grating of 125mm size (square/round), male/female pattern with or without hole, fixed in nahani/floor traps with white/coloured cement, fixed in repairs, complete all as specified & directed.
Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified & directed.
Vitreous china, wash hand basin with pedestal, flat back, white of size 580mmx450mm including brass chromium plated central hole mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe, brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, chain and plug, porcelain stopper, PVC 32mm dia waste pipe including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed.
PVC connections 15mm size with PTMT nuts of length 450mm, fixed in repairs, complete all as specified & directed.
Vitreous china wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, plastic water closet seat, white, closed pattern with flat bottom and cover, mild steel chromium plated or aluminium hinging device, chromium plated jet nozzle with 1500mm long PVC pipe fixed with screws of suitable size including making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, fixed in repairs, complete all as specified & directed.
Vitreous chinaware squatting pan, 'Orissa Pattern' size 580mm x 440mm with integral foot rests, white, with ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repairs, complete all as specified & directed.
PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, fixed in repairs, complete all as specified & directed.
Stainless steel sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 915x460mm with bowl size 410x330x160mm, fixed in repairs, complete all as specified & directed.
Stainless steel plate rack of size 900x600x250mm made out of 0.63mm thick stainless steel, wall mounted type with 5/6 partitions as per sample kept in AGE office, fixed in repairs, complete all as specified & directed.
PVC cabinet made of ABS material of size 450x600mm with glass front, fixed in repairs, complete all as specified & directed.
Dismantling water tanks of capacity 500 litres or 1000 litres, complete all as specified & directed.
Rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top), triple layer, connecting up pipes, securing access covers etc, hoisted & fixed in position of capacity 500 ltrs, complete all as specified & directed.
Rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top), triple layer, connecting up pipes, securing access covers etc, hoisted & fixed in position of capacity 1000 ltrs, complete all as specified & directed.
20mm bore, ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210gms), fixed in repairs, complete all as specified & directed.
Decorative towel ring, brass chromium plated of 150mm dia fixed with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified & directed.
Toilet paper holder with flap, brass chromium plated, fixed in repairs, complete all as specified & directed.
25mm dia stainless steel curtain rod of 1mm wall thickness in one length as per door/window with stainless steel bracket & knob of suitable size, stops rollers etc, fixed in repairs, complete all as specified & directed.
Hand Shower (Health Faucet) with 1 meter long easy flex tube in chrome finish & wall hook, fixed in repairs, complete all as specified & directed.
Plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixed in repairs, complete all as specified & directed.
Soap dish, brass chromium plated, of size 100x60mm, fixed to walls with chromium plated screws, fixed in repairs, complete all as specified & directed.
PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, fixed in repairs, complete all as specified & directed.
PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls with necessary clamps, fixed in repairs, complete all as specified & directed.
PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints, fixed to walls with necessary clamps, fixed in repairs, complete all as specified & directed.
110mm bore PVC (SWR) bends any radius, fixed in repairs, complete all as specified & directed.
Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed & directed.
10mm thick rendering in cement mortar 1:3 on concrete surfaces ceiling and similar items, surface finished even and smooth without using extra cement, complete all as specified & directed.
15mm thick rendering in cement mortar 1:6 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified & directed.
15mm thick rendering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified & directed.
Preparation of new plastered or concrete surfaces of walls, chajjas, facias, cornices and similar items and and applying two coats of cement base paint over a coat of cement primer, complete all as specified & directed.
Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified & directed.
Preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of chalk whitening, complete all as specified.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repairs, complete all as specified & directed.
Chromium plated corner glass shelf with bracket, fixed in repairs, complete all as specified & directed.
18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framed work as in cup board shutters, shelves etc., with 3mm thick teak wood beading/lipping all around, complete all as specified & directed.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified & directed.
Dismantling timber scantling 40 Sqcm and over in section, in any position (framed work), complete all as specified & directed.
2nd class hard wood (Sal/Hollock) plain, solid, straight chowkats/frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, with one or more rebates, complete all specified & directed.
Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed.
Mild steel framed work as in staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc., conforming to Fe-290 grade-E-165, complete all as specified & directed.
Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
Pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
PCC 1:3:6 nominal mix, type C-0 using 12.5mm graded crushed stone aggregate as in filling of pressed steel door frames/chowkats, complete all as specified & directed.
35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.
35mm thick 2nd class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, size of members of shutters as specified in clause 8.24 (b) of SSR Part-I, fitted to chowkat, complete all as specified & directed.
Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified & directed.
Preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified & directed.
Aluminium anodized powder coated (minimum thickness 50 micron) window consisting of one shutter of glazed and one shutter of gauged including all necessary fittings, the following items shall be included in quoted rate of this item :- (a) Aluminium powder coated frame of section 101.6 x 44.45 mm x 1.6 mm including mullion (double rebate). (b) Size of styles, top & bottom rails of aluminium powder coated window shutters of section 63.5 x 44.45 mm x 1.6 mm thick. (c) Aluminium tower bolt 100mm long (12mm rod) - 02 Nos (d) Aluminium hinges 75mm long - 02 Nos in each leaf (e) Aluminium handle folding type 75mm long - 01 Nos in each leaf
(f) Mild steel galvanized wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm (for gauged shutter) including jointing cleat, rubber packing and anodized aluminium snap beading as directed. (g) 5.0 mm thick tinted glass glazing as in aluminium window with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket. Note : Complete item as specified here-in-before shall be measured and paid as a composite as per mode of measurement i.e. . 'PER SQUARE METRE'
Solid PVC door/cup board frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.
Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified & directed.
Butt hinges, medium weight, cold rolled, mild steel 100mm long, complete all as specified & directed.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, 250mm long, complete all as specified & directed.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long, complete all as specified & directed.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long, complete all as specified & directed.
Aluminium handle, cast type, anodised, 150mm long, complete all as specified & directed.
Aluminium handle, cast type, anodised, 100mm long, complete all as specified & directed.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, 250mm long, fixed in repairs, complete all as specified & directed.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long, fixed in repairs, complete all as specified & directed.
Aluminium handle, cast type, anodised, 150mm long, fixed in repairs, complete all as specified & directed.
75mm size Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified & directed.
300mm ordinary rat tail rod pattern door spring including roller and roller plate of mild steel and fixed to pressed steel frame / MS frame/ wooden chowkhats including necessary welding work etc where-ever required, complete all as specified & directed.
Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified & directed.
Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, fixed in repairs, complete all as specified & directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.
Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but nexc 0.11 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, taking down door shutter and refixing the shutter at same place after laying of tile, complete all as specified and directed.
Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, taking down door shutter and refixing the shutter at same place after laying of tile, complete all as specified and directed.
Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.
Vitrified light shade tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4, taking down door shutter and refixing the shutter at same place after laying of tile, complete all as specified & directed.
Vitrified light shade tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm, as in vertical surfaces such as skirting/dado etc., set and and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.
18-20mm thick black granite stone work (table rubbed and polished) machine cut in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, rounding edges of stone slabs over & including 15mm thick screed bed in cement mortar 1:4, complete all as specified & directed.
18/19mm thick block board, grade 2 quaility, interior grade, commercial type, fixed with screws to timber frame work as in cupboard shutters / shelves etc with lipping (15mm thick 3 side and 20mm thick hinge side) fixed in repairs, complete all as specified & directed.
18mm thick PVC Celuka board without lamination of any colour as in kitchen cupboard shutters / shelves etc, fixed in repairs, complete all as specified & directed.
18mm thick PVC Celuka board with lamination, glossy finish of any colour as in kitchen cupboard shutters / shelves etc, fixed in repairs, complete all as specified & directed.
6mm thick PVC Celuka board without lamination of any colour as in kitchen cupboard shutters / shelves etc, fixed in repairs, complete all as specified & directed.
Rolling sliding channels of size 450mm length, fixed in cupboard with screws for holding stainless steel basket as in drawers, complete all as specified & directed.
Zero crank hinge of size 150mm, heavy duty, soft closing type as in shutter of cupboards in kitchen, complete all as specified & directed.
Stainless steel fasteners of size 75mm long steel supports, drilled and fixed to walls, complete all as specified & directed.
50mm dia and 75mm long steel support, fixed at bottom of cupboard box, complete all as specified & directed.
Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specified & directed.
Stainless steel designer handle (heavy duty) of 150mm size, fixed to drawers or cupboard shutters, complete all as specified & directed.
Magnetic catcher, heavy duty, brass body and striking plate, fixed in cupboard shutters, complete all as specified & directed.
40mm dia, copboard knobs fixed with nut, screw and washer of mild steel, brass polished, complete all as specified & directed.
32mm dia PVC waste pipe for wash hand basin/urinal, 90cm long, flexiable type, fixed in repairs, complete all as specified & directed.
40mm dia PVC waste pipe for kitchen sink, 90cm long, flexiable type, fixed in repairs, complete all as specified & directed.
PVC cover suitable for water storage tank of 500 / 1000 ltrs with locking arrangements, fixed in repairs, complete all as specified & directed.
Brass CP waste coupling 32mm dia with long screwed shank and fly nuts for kitchen sink (half or full threaded), fixed in repairs, complete all as specifed & directed.
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, double leg door stopper overall length 75mm, fixed in door, hanging style, fixed in repair, complete all as specifed & directed.
Door cill for panelled or glazed/gauzed shutter, fixed at bottom with screws, fixed in repairs, complete all as specifed & directed.
M/S CHOUDHARY BUILDERS
S R CONSTRUCTIONS
M/S RANADHAWA
KAMAL CONSTRUCTION
M/S Vishwakarma Builders
Hare krishna engineering const.
M/S Sukhmani Construction Co.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .