Tender ID

CPPP

Cancelled

Works

Marine Works

ALHW/DCE A /EE NS/Tend-33/25-26

Andaman Lakshadweep Harbour Works

Sri Vijaya Puram South Andaman | South Andamans, Andaman And Nicobar Islands

Amount: Refer DocsCloses: 16 Apr 2026Closed

Timeline

Published2 Apr 2026
Closed16 Apr 2026
Cancelled20 May 2026

Corrigenda

Corrigendum

3 updatesLatest on 16 Apr 2026Submission Ends:16 Apr 202624 Apr 2026

Date changes

Download Ends16 Apr 202624 Apr 2026Submission Ends16 Apr 202624 Apr 2026Bid Opening17 Apr 202625 Apr 2026

Cancellation Details

Cancellation of Tender

CANCELLATION OF TENDERDue to administrative reasonReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 20 May 2026

Tender Value

Refer Docs

EMD Value

₹17,722

Closing Date

16 Apr 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

EE(NS), ALHW, Sri vijaya puram

Address

O/o Deputy Chief Engineer-(Andaman), ALHW, Sri Vijaya Puram

Work Description

Attending minor repairs and maintenance to Rutland RCC Jetty at Sri Vijaya Puram

Tender Information

Tender ID

2026_ALHW_904362_1

Reference Number

Attending minor repairs and maintenance to Rutland RCC Jetty at Sri Vijaya Puram

Tender Type

Open Tender

Product Category

Marine Works

Form of Contract

Works

Period of Work

365 days

Location

Sri Vijaya Puram South Andaman

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredEMD shall be deposited in favour of Pay and Accounts Officer, ALHW, SRI VIJAYA PURAM as per NIeT (.pdf)

RequiredEnlistment order of contractor or other department valid registered order as per NIeT (.pdf)

RequiredCertificate of work experience.(as followed as Si.no. 20.1) (.pdf)

RequiredAffidavit as per Clause 1.2.3 of CPWD 6.in non Judicial Stamp paper (.pdf)

RequiredEPF , GST registration, PAN Card (.pdf)

RequiredIT returns for the last 3 years including as followed by Si.No.20.2 and 20.3 as per NIeT (.pdf)

RequiredForm C-3 Calculation bidding capacity along with Annual Turnover during the last 7 year as per NIeT (.pdf)

Finance

RequiredPrice bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹17,722

Important Dates

Last Activity

20 May 2026

Published

2 Apr 2026

Bid Opening

17 Apr 2026

Download Starts

2 Apr 2026

Download Ends

16 Apr 2026

Submission Starts

2 Apr 2026

Clarification Period

2 Apr 2026 - 8 Apr 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (1 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Cutting and removing of RCC/rich by using pavement breaker and air compressor, including the cost of hire charges of pavement breaker and air compressor, all labour charges for breaking and stacking of unserviceable and serviceable materials within 50 mtrs as directed by the EIC, gas, cutter, transporation charges of all materials to work site, all labour charges, minor tools and plants ,GST,LWC, etc., complete.
2Providing and laying PCC M20 (1:1.5:3 - one cement, one and half mainland river sand & three stone chips) using 20 mm. graded stone chips from Main land, Mainland River Sand, 43 grade Ordinary Portland Cement, approved plasticizer, silica fume for cast-in-situ concrete items for wearing coat etc. as indicated in the drawing and as directed by the EIC including cost of nominal shuttering, cement, silica fume, plasticizer, cost of stone chips, mainland river sand, all labour charges for mixing, conveying, placing, consolidation, screening and washing of stones chips and sand, transportation charges of all materials to Work Site and running charges of batching plant, vibrator, consumables and all other equipments required for this work , cost of minor tools and plant etc. complete.
3Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand ) including cost of all materials , labour charges transportation charges of all materials to work site, scaffolding charges, LWC & GST etc., complete.
4Fixing/ Placing of Mini giant tyre fenders on the berthing face of the jetty/wharf/ Ferry containing one Mini Giant tyre ( Of Outer DIa 1.1 m to 1.40m , Inner Dia 0.5m to 0.6m and thickness 0.35 to 0.50m), excluding cost of mini giant tyres MS Plate 8mm , Heavy duty G.I PIpe 3" , Wire rope ( 25 MM),Wire Grip (25mm) , cuttings holes and providing fixtures to the tyres in position as directed by the EIC, cost of all labour charges, transportation charges of all materials to work site, scaffolding charges , LWC & GST etc., complete.
5Painting two coats with synthetic enamel black paint on the surface of 10 Ton capacity bollards and numbering over the bollards well as the tyre with white paint as required, including cost of paint, brush all labour charges, minor tools , LWC &GST etc., complete
5.1	a) 10 Ton Bollard	-	Nos	-	-
6Supply of Engine Dinghy/ Motor Launches with fuel and crews as & when required for transportation of department staff for supervision including hire charges of engine dinghy with fuel & operator

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.45 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.89 MB

Work Item Documents

tenderdoc.pdf

Tender Documents • 11.28 MB

BOQ_950556.xls

BOQ • 0.25 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Cutting and removing of RCC/rich by using pavement breaker and air compressor, including the cost of hire charges of pavement breaker and air compressor, all labour charges for breaking and stacking of unserviceable and serviceable materials within 50 mtrs as directed by the EIC, gas, cutter, transporation charges of all materials to work site, all labour charges, minor tools and plants ,GST,LWC, etc., complete.
2Providing and laying PCC M20 (1:1.5:3 - one cement, one and half mainland river sand & three stone chips) using 20 mm. graded stone chips from Main land, Mainland River Sand, 43 grade Ordinary Portland Cement, approved plasticizer, silica fume for cast-in-situ concrete items for wearing coat etc. as indicated in the drawing and as directed by the EIC including cost of nominal shuttering, cement, silica fume, plasticizer, cost of stone chips, mainland river sand, all labour charges for mixing, conveying, placing, consolidation, screening and washing of stones chips and sand, transportation charges of all materials to Work Site and running charges of batching plant, vibrator, consumables and all other equipments required for this work , cost of minor tools and plant etc. complete.
3Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand ) including cost of all materials , labour charges transportation charges of all materials to work site, scaffolding charges, LWC & GST etc., complete.
4Fixing/ Placing of Mini giant tyre fenders on the berthing face of the jetty/wharf/ Ferry containing one Mini Giant tyre ( Of Outer DIa 1.1 m to 1.40m , Inner Dia 0.5m to 0.6m and thickness 0.35 to 0.50m), excluding cost of mini giant tyres MS Plate 8mm , Heavy duty G.I PIpe 3" , Wire rope ( 25 MM),Wire Grip (25mm) , cuttings holes and providing fixtures to the tyres in position as directed by the EIC, cost of all labour charges, transportation charges of all materials to work site, scaffolding charges , LWC & GST etc., complete.
5Painting two coats with synthetic enamel black paint on the surface of 10 Ton capacity bollards and numbering over the bollards well as the tyre with white paint as required, including cost of paint, brush all labour charges, minor tools , LWC &GST etc., complete
5.1	a) 10 Ton Bollard	-	Nos	-	-
6Supply of Engine Dinghy/ Motor Launches with fuel and crews as & when required for transportation of department staff for supervision including hire charges of engine dinghy with fuel & operator

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Cutting and removing of RCC/rich by using pavement breaker and air compressor, including the cost of hire charges of pavement breaker and air compressor, all labour charges for breaking and stacking of unserviceable and serviceable materials within 50 mtrs as directed by the EIC, gas, cutter, transporation charges of all materials to work site, all labour charges, minor tools and plants ,GST,LWC, etc., complete.

2Providing and laying PCC M20 (1:1.5:3 - one cement, one and half mainland river sand & three stone chips) using 20 mm. graded stone chips from Main land, Mainland River Sand, 43 grade Ordinary Portland Cement, approved plasticizer, silica fume for cast-in-situ concrete items for wearing coat etc. as indicated in the drawing and as directed by the EIC including cost of nominal shuttering, cement, silica fume, plasticizer, cost of stone chips, mainland river sand, all labour charges for mixing, conveying, placing, consolidation, screening and washing of stones chips and sand, transportation charges of all materials to Work Site and running charges of batching plant, vibrator, consumables and all other equipments required for this work , cost of minor tools and plant etc. complete.

3Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand ) including cost of all materials , labour charges transportation charges of all materials to work site, scaffolding charges, LWC & GST etc., complete.

4Fixing/ Placing of Mini giant tyre fenders on the berthing face of the jetty/wharf/ Ferry containing one Mini Giant tyre ( Of Outer DIa 1.1 m to 1.40m , Inner Dia 0.5m to 0.6m and thickness 0.35 to 0.50m), excluding cost of mini giant tyres MS Plate 8mm , Heavy duty G.I PIpe 3" , Wire rope ( 25 MM),Wire Grip (25mm) , cuttings holes and providing fixtures to the tyres in position as directed by the EIC, cost of all labour charges, transportation charges of all materials to work site, scaffolding charges , LWC & GST etc., complete.

5Painting two coats with synthetic enamel black paint on the surface of 10 Ton capacity bollards and numbering over the bollards well as the tyre with white paint as required, including cost of paint, brush all labour charges, minor tools , LWC &GST etc., complete

5.1

a) 10 Ton Bollard

Nos

6Supply of Engine Dinghy/ Motor Launches with fuel and crews as & when required for transportation of department staff for supervision including hire charges of engine dinghy with fuel & operator