CERTAIN REPAIR AND PERIODICAL SERVICES AT COMPOUNDER LINE JMTC LINE UNIT AREA AND OFFICE ACCN AND BOUNDARY WALL UNDER ZONE II B AREA AT JAIPUR MIL STN

Amount

Dismantling AC corrugated/semi corrugated sheets etc any thickness incl ridges as in roof covering and stacking at side where directed and removed of debris to a distance not exc 50M and depositing where directed complete all as directed.

M&L 6 mm thick asbestos cement corrugated sheets in roof fixed with 'L' type or 'J' type or cranked hook bolts all as specified & as directed

All as per item No 2 above but except sheets

M/L 6mm thick asbestoes cement two pieces adjustable serrated ridge for corrugated or semi corrugated as in roof fixed with 'L' type or 'j' type or cranked hook bolts, GI washer, bitumenwasher complete all as specified and directed.

All as per item No 4 above but except sheets

Dismantling of timber scantlings 40 Sq cm and over in section in any position

M&L Second class Hard wood in scantilings wrought timber and fixed

M&L Roof trusses(framed) russed, purlines, crane, gantries ,rails and fastening and heavy bracket framing (beams,tee,angle,chnnel or flat sections) including distance pieces etc all as specified and as directed.

S & F 2 mm thick Fibre glass reinforcement translucent corrugated sheeting with two corrugation side lap fixed with hook cranked or "L" shaped in lieu of screw.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

Demolition of brick or stone masonry built in cement mortar.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6m man radius built in cement mortar 1:6.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 brought upto courses

Taking down shutter of any description exceeding 1 sqm but not exceeding 2.0 sqm each.

Taking down door chawkhat with shutter (without taking off shutter from frame) of area exc. 1.5 Sqm and n.exc. 4.00 Sqm each

Taking down chowkets or frame with shutter (without taking off shutters from the frame) n exc 1.5 sqm each and removing to store

Taking down existing aluminium door of any size and refixing in same opening after easing & changing necessary jointing cleats, glazing, clips, rubber packing anodised aluminium, snap beading and screws as directed by Engineer-in-Charge.

M & L 35 mm thick 2nd class factory made plain, framed, panelled door shutters kiln seasoned & chemically treated second class hard wood (two panels) with lock rail and panels of 9 mm thick BWP commercial marine grade ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and style shall be as per IS-1003. The shutters shall be fitted to chowkhats as directed by Engineer-in-Charge.

M&L 35mm thick 2nd class hard wood factory made glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered/ rounded fitted without & mitred beads for securing glass etc size of members of shutters as specified in SSR Part I Section 8 Clause 8.24 supplied & fitted to chowkhats.

S&F 30 mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side including liping beading all round as in Door Shutter,Cup board shutter & Kitchen rack all as specified in SSR Part I, Section 8, clause 8.20(c)

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing ® Make; Sintex, Rajshri or equivalent as approved by GE.

S&F Factory made solid PVC Moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face &2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing.

S & F 200mm long mild steel barrel tower bolts, stove enameled black with bright bolt (ISI marked)

S & F Mild steel pressed steel handle, oval type, stove enameled black of size 150 mm (ISI marked)

S & F butt hinges, medium weight, cold rolled, mild steel, 100 mm long, fixed to angle iron chowkhats including welding complete.

S & F 300 mm long mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, fitted to shutters complete.

S&F in repairs curtain rod mild steel chromium plated with fixing brackets, stops, rollers etc of 19mm dia.

S&F in repair aluminium (die cast) hydraucally regulated designation No.3 universal type, door closer suitable for door shutters of 851 to 1000mm width and of weight between 61 to 80kg.

Floor door stopper of aluminium alloy body fixed to door with single rubber shoe of size 100mm.

S&F mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tunned tacks or galvanised wire staples all as directed by Engineer-in-Charge.

All as per serial item No.30 above but fixed in repair.

S & F in repairs steel window with side hung shutter and box type hinges with steel handle and steel peg stay with glazing bars dovetailed or welded incl taking down old steel window

All as per Item No 32 above but without glazing bars

M&L repair of old steel window by welding of hinges, peg stay knobs etc including providing on existing window including supply and fix of necessary steel window handle, peg stay etc and providing one coat of synthetic enamel paint complete all as specified.

S&F in repairs Steel ventilator with top hung shutter with glazing bars including hinges steel peg stay etc complete incl taking down old ventilator.

S&F mild steel work as in guard bars etc conforming to E-165 (Fe-290)

Mild steel angle iron door frame 40x40x6mm conforming to E-165 (Fe-290) including 12mm dia MS bars for strengthen at bottom of chowkat and welding of hinges and hold fasts to chowkhat including cutting floor at bottom to accommodate CTD bar and making good the floor in PCC 1:2:4 type B-0 to match the existing floor.

Mild steel work in bands, straps, clamps, hold fast etc including bolts if required conforming to E-165 (Fe-290).

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and removal of same from outside MOD land complete all as specified and as directed by Engineer-in-Charge.

PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth proection 50mm thick finished even and smooth without using extra cement.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc over and incl 15 mm thick screed bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed by Engineer-in-charge.

M&L Coloured Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc,set and jointed in neat cement sluryy and pointed in coloured cement to match as in floor over 15mm thick screed bed in CM (1:6).

M&L for glazed ceramic coloured tiles of size 300mm x 200mm, 7mm thick on vertical surfaces such as skirting, dado etc over & including 15mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed by Engineer-in-Charge.

M&L vitrified ceramic coloured tile of 10 mm thick sqaure/rectengular polished area of each tile exc 0.36 sqm but not exc 0.42 sqm in floor etc set and jointed in neat coloured cement to match the sade over and including 15 mm thick screed bed in CM 1:6 all as specified and as directed.

S&F joint free coloured glazed ceramic tiles first quality of size 300x450x 7 to 8 mm th , in skirting, dado etc set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed

M&L PU coated chequered cement concrete tiles with grey cement and pigment 25cm x 25cm x 25mm thick set jointed and pointed in neat cement slurry over 15mm thick screed bed in cement mortar 1:6.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar and removal of same from outside MOD land complete all as specified and as directed by Engineer-in-Charge.

M & L machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade, with grey cement laid over and including 25 mm thick sand cushion and joints of interlocking tiles filled with dry sand and compacted with mechanical plate vibrator over 75mm thick PCC (1:4: 8) using 40mm graded stone aggregate complete all as specified and directed

M&L Machine Cut Kota Stone Slab Flooring 20-25mm thick over 20mm thick screed bed in Cement Morter 1:6 and Jointed with grey Cement slurry mixed with pigment to match the shade of the slab including Rubbing and Polishing compleate all as directed by Engineer-in-Charge.

M&L Machine Cut Kota Stone Slab 20-25mm thick as in Dado/Skirting/Steps/Risers etc set over 10mm thick backing Coat in CM 1:4 Jointed with grey Cement slurry mixed with pigment to match the shade of the slab including Rubbing and Polishing compleate all as directed by Engineer-in-Charge.

Taking down cement plaster from stone wall surfaces etc including raking out joints, hacking for key, scrubbing down with water including removal of debris to a distance not exceeding 100m and deposited where directed by Engineer-in-Charge.

M&L for rendering 15mm thick plaster in CM 1:4 on stone masonary surfaces or other than fair faces of brick work finished even and smooth without using extra cement.

M&L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick / stone masonary or concrete surfaces of wall finished even & smooth without using extra cement.

M&L for rendering 10mm thick in cement mortar 1:3 on ceiling or concrete surfaces of walls, finished even & smooth without using extra cement.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint.

M&L preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat putty on walls.

M&L Preparation of newly plastered surfaces and applying two coats of oil bound distemper on ceiling.

Hacking out old broken glass (any thickness size, quality or description) from wooden or metal frame and glazed with oil putty or fixed with beads including punching or drilling out old glazing pins/ spring clips and providing and fixing new glazing pins/ springs clips.

Supply and fixing in repairs sheet glass, ordinary quality, 3mm thick and glazing with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and fixing in repairs sheet glass, figured/pin headed 3mm thick and glazing with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and as directed.

M&L preparation to new or previsouly untreated wooden surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Taking up or down 15 mm bore steel water tubing and connections incl for refxing and remoal to store

Taking up or down 20 mm bore steel water tubing and connections incl for refxing and remoal to store

S&F GI tubing 15 mm medium grade with all fittings (ISI marked) and fixed to walls, ceiling or laid in floor complete all as specified and as directed.

S&F GI tubing 20 mm medium grade with all fittings (ISI marked) and fixed to walls, ceiling or laid in floor complete all as specified and as directed.

S & F in repairs Bib taps 15mm bore, cst copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule fancy type.

S & F in repair CP Pillar taps fancy type 15mm bore, cast copper alloy with capstan heads screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts, screwed for iron pipe.

S&F grating doom 125mm dia with waste hole of PTMT (Minimum weight 40 gms) fixed in repair.

S & F in repairs Stop valve 15mm bore, cast copper alloy screwed down high presssure, with crutch of butterfly handle screwed both ends for iron pipe or for unions.

S & F in repair Chromium plated shower roses with swivel joints dia of rim 80mm in repair

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls 110mm bore including taking down of old damaged pipes.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls 75 mm bore including taking down of old damaged pipes.

S&F in repairs PVC (SWR) bends any radius 110mm dia with access door all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius 75 mm dia with access door all as specified and as directed.

S &F in repairs Vitreous China Squatting pan, Orrisa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) and making good to floor.

S&F in Repair Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified & directed by Engineer-in-charge.

S & F in repairs ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of size 15mm bore

S & F in repairs ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of size 20 mm bore

S&F in repairs Vitreous China bowl urinal flat black, size of 465 x 355 x 265mm white with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with & incl 60mm long brass screws, pointing around urinal back in cement

S&F in repairs Vitreous China wash basin white flat black size of 580 X 450mm incl brackets for fixing and cutting for and pinning in ends of brackets or erecting stand

S&F in repairs PVC valveless, syphonic action type flushing cistern of 10 ltrs capacity low level white with inlet ball valve, float and handle incl brackets

S&F in repairs towel rail 600mm long PTMT fixed with and incl CP brass screws and wooden/plastic cleats (Minimum weight 190 gms)

S&F in repairs sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long

S&F flush pipe of polythelene of low or high density or PVC, 32mm dia for low level cistern

S&F in repairs plastic water closet seat cover, black or coloured closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device

Providing and fixing suspended false ceiling make Armstong ORCAL extra microperforation size of 600 x 600 x 15 mm Ceiling Tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) of Armstorng make complete or equivalent brand of make including necessary hanging system arrangement which is required to be made from existing RCC roof / stone slab of building incl dismantling of existing ceiling all as directed by Engineer-in-Charge.

S&F in repairs CP fancy type hand zet spray 15mm bore (ISI marked) including S&F extension pipe of 1 mtr long.

S&F rotational moulded polyethylene water storage tanks of 500ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including taking down old damaged tanks

Rotational moulded polyethylene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR Part-I including taking down old damage water tanks.

S & F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of size 15mm bore

M&L cleaning and removing all scale and dirt etc from over head tanks and from mouths of circulating pipes etc capacity of tank exc 250 and not exc 500 ltr

Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M&L mild steel deformed or twisted bar (TMT) 6 to 8mm and over cut to length bent to shape required including cranking bending spirally for columns hooking ends and binding with and mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L providing precast cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in cover slabs (for manholes etc) and shifting to different places and set in cement mortar 1:4 all as directed by Engineer-in-Charge.

Dismantling RCC trellies work(jafri) all as specified and as directed.

Providing precast cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate for louvres and jallies, 30 mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4 all as specified and as directed.

S&F in repairs sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X 330mm X 160mm

S&F in repairs sink without drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size 410mm X 330mm X 160mm

S&F in repair for hydraulic operated double action floor spring for aluminium door made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L 5 mm thick tinted glass packing with rubber gasket, Al beading etc around both sides for fixing of glass including taking down old broken glass from Al door/windows all as specified and directed.

S&F powder coating anodised aluminium work for doors, windows, ventilators,grills & partation work with one or more rebates including joining cleat for fixing etc. complete all as specified.

M&L 9 mm thick Novapan board fixing to aluminium framing and partiton wall all as specified and as directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting grinding and polishing , laid over an including 15 mm thick acreed bed in cm 1:6 complete all as specified

Rounding to edges of stone slabs (Kota / Granite) one edges such as in steps, cooking platform and other similar situations all as specified

S&F in repair mild steel work as in swan necks etc all as specified and as directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S & F in repairs 15mm bore angle stop valves cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union

S & F in repair wall mixer valve 15mm dia of Make Jaquar Cat Part No QQT -7219 or equivalent as approved by GE.

S&F in repair central hole single lever wash basin mixer 15mm dia 450 mm Jaquar Cat part No QQT 7001 B or equivalent as approved by GE.

S&F in repair 15mm bore bib tap two way,cast copper alloy chromium plated.fancy type with capston head,screwed down, screwed for iron pipe or for brass ferrule.Make Jaquar Cat Part No QQT -7041 or equivalent as approved by GE.

S&F in repair Jet suitable for EWC with 01 mtr pipe.

S&F in repair fancy type Health faucet 15mm bore (ISI marked) including extension pipe of 1 mtr long Make CERA Cat part No CG 105A or equilant as approved by GE

S&F in repair Vitreous China snow white colour wash basin,Cyress pattern Size with pedestal, 32 mm dia CP waste cupling,bottle trap & all Connected items wastepipe,connection pipe.Make CERA Cat Part No 1071 & 1171 or equivalent as approved by GE.

S&F in repair soap tray chromium plated complete all as specified and directed.Make CERA Cat Part No CA 606 or Equilant in Jaguar as approved by GE

S&F in repair brass CP Maggine holder complete all as specified.

S&F in repair CP brass Towel ring Make-CA 102 of CERA or equilant in Jaquar as approved by GE

S&F in repair toilet paper holder Make-Cera Cat Part No CA 106 or Equilant in Jaquar as approved by GE

S&F in repair corner glass self large 300mmx300mm complete all as specified.

Bib taps in rep, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in Repair Brass Chromium Plated Shower Rose 125 mm size suitable for 15 mm bore pipes including shower arm.

S&F in Repair Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified & directed by Engineer-in-charge.Make Cera

M&L dholpur stone cladding gang saw cut with machine cut edges,uniform colour each stone size exceeding 0.25 sqm area and not exceeding 0.50 sqm fixed with and including,making V groove at top and bottom of stone and drilling hole and drilling hole for hold fastener,polishing,rubbing & including silicon treatment in repairs.

M&L for grinding & Polishing of Dholpur Stone on Wall Cladding all as specified and directed

M&L for two coat of cement base paint over a coat of chalk whiting primer on newly plastered of wall including necessary preparation of surface complete all as directed.

M&L preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whitening primer.

M&L preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying cone coat of white wash all as specified and directed.

M&L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying two coat of white wash all as specified and directed.

M&L for preparation of old plastered or unplastered decorated surfaces and applying one coat of white wash on ceiling.

M&L for preparation of old decorated surface of walls and applying one coat of distemper oil emulsion of any tint all as directed.

M&L for preparation of old decorated surface of walls and applying two coats of distemper oil emulsion of any tint all as directed.

M&L for preparation of old surface of ceiling and applying one coat of distemper oil emulsion of any tint all as directed.

M&L for preparation of old surface of walls and applying one coat of cement base paint of any tint all as directed.

M&L for complete removal of existing treatment on wall surfaces and applying two coats of cement base paint as per approved colour scheme over a coat of primer complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or grith and applying one coat of synthetic enamel paint of any tint all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or grith and applying two coat of synthetic enamel paint of any tint all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or grith and applying one coat of synthetic enamel paint of any tint all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or grith and applying two coat of synthetic enamel paint of any tint all as specified and directed.

M&L preparation of surfaces and applying one coat of varnishing to old wooden surfaces over 10cm width or girth.

M&L for preparation of old external plastered surface of walls and applying one coat of emulsion exterior weather proof paint of any tint all as directed.

M&L for preparation of old external plastered surface of walls and applying two coat of emulsion exterior weather proof paint of any tint all as directed.

M&L for making good the edge of chajja/facia in proper shape i.e. plum with rich cement mortar and providing 10mm thick plaster at bottom in CM 1:4 including making the surface with existing treatment complete all as directed.

M&L writing letters or figures (Block, Roman, italic or Indian) of size 125mm length and 10mm wide not exc 5 letters or figures like P/394 with reflective adhesive tape on 3mm to 4mm thick 300mm x200mm acrylic sheet including fixing on stone/brick/concrete wall with 2 Nos chromium plated brass screws 30mm long with plastic rawl plugs including drilling holes etc complete all as specified and directed.

M&L writing letters or figures (Block, Roman, italic or Indian) of size 75mm length and 10mm wide not exc 2 letters or figures like 12 with reflective adhesive tape on 3mm to 4mm thick 150mm x100mm acrylic sheet including fixing on stone/brick/concrete wall with 2 Nos chromium plated brass screws 30mm long with plastic rawl plugs including drilling holes etc complete all as specified and directed.

Schedule of Credit

M/S ROHIT CONSTRUCTION

UNIVERSAL INFRAPROJECT PVT LTD