CONSTRUCTION OF PARTITION COMPOUND WALL OF 06 NOS. F TYPE QUARTERS AT LAXMIPUJA CHOWK, HHEP, BURLA

Dismantling and removing brick or stone masonry in cement mortar including stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge

Earth work excavation in ordinary soil in embankments, roads etc within 50mtrs initial lead and 1.5mtrs initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.30 mtrs in depth alongwith proper compaction by PRR including hire and running charges of PRR including mechanical carriage of 5km and as per direction of Engineer-in-charge

Supply and filling in foundation and plinth with sand watered and rammed including the cost conveyance, royalty all other taxes and labour charges etc complete

Cement concrete (1:3:6) with 4cm size hard granite metal including the cost, conveyance, royalty, all other taxes and labour charges etc complete

RC works of M25 (1:1.5:3) with 20mm and down grade black hard granite chips (crusher broken) including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surface smooth, providing grooves or beds where necessary including cost of all materials (excluding cost of tor steel) and cost of all labour with T&P required as per direction of Engineer-in-charge

Cutting, bending, binding and laying the grill of approved dia and placing in position of tor steel (IS 7686-2000) for RCC works and using binding wire 18

Rigid and smooth cantering and shuttering for RCC works including false works and dismantling them after casting including cost of materials

Fly ash brick masonry in cement mortar (1:4) using fly ash brick having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance of +/-8% after immersing the bricks in water for six hours before using foundation and plinth including hoisting, placing in position, watering, curing to required time etc including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete as per direction of Engineer-in-charge

20mm thick cement plaster (1:4) in finished smooth to inside / outside rough surface of walls after racking out the joint including watering curing to required time, cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P required for the work complete etc as per direction of Engineer-in-charge

Cement concrete (1:2:4) with 12mm size hard granite chips including the cost, conveyance, royalty, all other taxes and labour charges etc complete

Priming one coat with any approved primer (water based) on plastered surface after cleaning the surface, sand papering etc including cost, conveyance, royalties, cost of all labour with T&P required for the work complete as per direction of Engineer-in-charge

Wall painting two coats with weather seal coat paint of any approved shade over the exterior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of labour with T&P required for the work complete as per direction of Engineer-in-charge

Iron works wrought and put up in grated doors, windows and cage latrines including welding etc complete

Labour for fitting and fixing of MS gates / wooden door with frame as per approved design including cost of all materials complete but excluding cost of MS gates / wooden door with frame and fitting

Painting one coat with any approved primer on iron work after cleaning the surface, sand papering etc including cost, conveyance, royalties, taxes of all materials cost of all labour with T&P required for the work complete as per direction of Engineer-in-charge

Priming one coat any approved shade of paint on new iron work after cleaning the surface, sand papering etc including cost, conveyance, royalties, taxes of all materials, cost all labour with T&P required for the work complete as per direction of Engineer-in-charge