PROVN OF WATER REFILLING POINT, SINK, WHB WITH FITTING, SPL REPAIR OF OLD UG CABLE AND STREET LIGHT AT CERTAIN LOCATION AT 4AFSB VARANASI UNDER GE (AF) GORAKHPUR

Amount

Excavation in trenches n.exc. 1.5 m deep and n.exc.1.5 m wide in any type of soil and forming bottom surfaces for laying of cable, complete all as specified and directed.

Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected.

Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.

Returning filling in including spreading leveling watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

Removal surplus soil at a distance n. exc. 50 m and deposited where diredted at a lavel not exc. 1.50 m above the starting pont complete all as specified and directed.

Labour for boring, holes for inserting of 80 to 40 mm bore GI pope under the road/hard standing or any other location not less than 1200 mm deeep complete all as specified and ditected.

M & L GI pipe 20 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L GI pipe 50 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L GI pipe 80 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sq mm to 50 Sq mm 3.5 core/4 Core. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. ).

All as per item No. 11 above but size 120 Sqmm 3.5 core to 240 Sq mm 3.5 core, complete all as specified and directed.

Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 10 Sqmm 4 core.

All as per item No 13 above but size 16 sq mm 4.0 core, complete all as specified and directed.

All as per item No 13 above but size 35 sq mm 3.5 core, complete all as specified and directed.

All as per item No 13 above but size 50 sq mm 3.5 core, complete all as specified and directed.

All as per item No 13 above but size 120 sqmm 3.5 core, complete all as specified and directed.

All as per item No 13 above but size 150 Sqmm 3.5 core, complete all as specified and directed.

All as per item No 13 above but size 240 Sqmm 3.5 core, complete all as specified and directed.

Supply laying fixing in replacement or passing through pipe 1100 Voltage grade heavy duty cable with PVC insulated and sheathed aluminium conductor comfirming to relevent IS size 6 sqmm 2 core unarmoured and connecting to system complete all as specified and directed.

Supply and fix in replacement FRP , hot press moulded SMC pole box 295X255X120 mm comprising of 100 Ams aluminium bus bar 4 strips ( IP 55 protection ) with one MCB SP 6 Ams to be fixed inside the box and box will be clamped bottom of the pole with FI clamps (duly painted ) nut bolt washers of required size.Make - SINTEX ,Model GSJB-2520 or any other sample approved by GE.

S & F bracket made with GI tube light grade (not less than 1.2 RM) in length of 40 mm bore size and fixed to the LT pole with the help of two Nos FI Clamps of size 50X6 mm nut bolt and washers, complete all as specified and directed.

Taking down existing street light fitting/flood light/post top lantern of any type and make & capacity, complete all as specified and directed.

Supply and fix roadway luminaire LED light fittings of 60 watts and including necessary electric connection with 2.5 Sqmm twin core Copper conductor unarmoured cable, complete all as specified and directed. Make Bajaj /CG/Philips /Havells.

All as per item No.24 above but of 72 watts, complete all as specified and directed.

All as per item No. 24 above but of 90 watts, complete all as specified and directed.

All as per item No. 24 above but of 120 watts, complete all as specified and directed.

Supply and fix LED Flood light 60 W IP 66 including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size .Make Bajaj /CG /Havells, complete all as specified and directed.

All as per item No. 28 above but of 120 watts, complete all as specified and directed.

All as per item No. 28 above but of 200 watts, complete all as specified and directed.

Supply and fix LED post top lantern 25 W made in cast aluminium spigot housing with decorative opel polycarbonate diffuser and IP 65 protection including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make Bajaj /CG/Philips /Havells.

All as per item No. 31 above but of 35/40 watts, complete all as specified and directed.

Taking down existing old defective LT Panel / FP Box by disconnectiing its all elecetrical connections and by dismentelling foundation, complete all as specified and directed.

Supply, install, connect & testing cubical outdoor type factory made double door , powder coated LT bus bar feeder pillar box having alluminium bus bar suitable for 200 amps 3ph and neutral arrangement of size 500mm x 500mm x 200mm with MCCB 4 pole 100 A as incoming including provision of LED Indicating lamps (RYB) 01 set of 3. complete weather proof and vermin proof conforming to IP-54 made out of 3.15 mm thick CRCA sheet including provisions for ventilation and cable termination alley & two Nos suitable size of aluminum strip for body earthing all as per IS. It should be mounted on 40 x40 x 6mm angle frame with a clearance of at least 0.45 mtrs above GL and 0.30 mtrs below ground including required PCC for foundation complete all as specified and directed.

Supplying,installation,testing,commissioning of LT panel board 3 phase 4 wire system outdoor type factory made free standing,floor mounting with suitable PCC foundation dust and vermin proof cubical type (back door opening) interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finnaly plyester powder coated of finite green fully compartment with providing with suitable size of aluminum strip all as specified for the following.(a) Incomming :- (i) MCCB 125 AMPS 4 pole 415 Vollts 35 KA -01 No. (ii) Digital type amp meter 0-200 Amp with CT's 03 Nos. (iii) Digital type voltmeter 0-500 Volts -01 No. (iv) Indicating lamps (RYB) 01 set of 3. (v) Aluminium bus bar rating 200 Amps 3 phase neutral-01 set (vi) Chamber for incoming & outgoing cable.(b) Outgoing :- (i) MCCB 63 AMPS 25 KA 415 Volts 4 pole -02 No. (ii) Rex time switch weather proof max rex with power supply indicator max rex 4 QTB with IP -55 protection box complete MDS Legrand Cat No. 649914 -06 Nos. (iii) Power contactor 2 pole 40 amps MDS Legrand Cat No. 4068 .-06 Nos.

Supplying,installation,testing,commissioning of outdoor type LT panel board 3 phase 4 wire system ,415 Volts ,50 Hz factory made free standing , floor mounting dust and vermin proof cubical type interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finally powder coate painting having thickness not les than 100 micronsof finite grey, fully compartmentalized with providing two Nos suitable size of aluminum strip for body earthing and including suitable PCC foundation all as specified for the following :- (a) Incomming :- (i) On load changeover switch 400 AMPS 4 pole 415 Vollts -01 No. (ii) MCCB 400 AMPS 4 pole 415 Vollts 36 KA -01 No. (iii) Digital type amp meter 0-400 Amp with CT's 03 Nos. (iv) Digital type voltmeter 0-500 Volts -01 No. (v) Indicating lamps (RYB) 01 set of 3. (vi) Aluminium bus bar rating 600 Amps 3 phase neutral-01 set. (vii) Chamber for incoming & outgoing cable.(b) Outgoing :- (i) MCCB 250 AMPS 25 KA 415 Volts 4 pole -01 No. (ii) MCCB 200 AMPS 25 KA 415 Volts 4 pole -02 No. (iii) MCCB 100 AMPS 16 KA 415 Volts 4 pole -02 No. (iv) MCCB 63 AMPS 16 KA 415 Volts 4 pole -02 No.

Supplying,installation,testing,commissioning of outdoor type LT panel board 3 phase 4 wire system ,415 Volts ,50 Hz factory made free standing , floor mounting dust and vermin proof cubical type interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finally powder coate painting having thickness not les than 100 micronsof finite grey, fully compartmentalized with providing two Nos suitable size of aluminum strip for body earthing and including suitable PCC foundation all as specified for the following :- (a) Incomming :- (i) On load changeover switch 250 AMPS 4 pole 415 Vollts -01 No. (ii) MCCB 250 AMPS 4 pole 415 Vollts 36 KA -01 No.(iii) Digital type amp meter 0-400 Amp with CT's 03 Nos.(iv) Digital type voltmeter 0-500 Volts -01 No. (v) Indicating lamps (RYB) 01 set of 3. (vi) Aluminium bus bar rating 400 Amps 3 phase neutral-01 set. (vii) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCCB 125 AMPS 25 KA 415 Volts 4 pole -02 No. (ii) MCCB 63 AMPS 16 KA 415 Volts 4 pole -02 No.

Supplying,installation,testing,commissioning of outdoor type LT panel board 3 phase 4 wire system ,415 Volts ,50 Hz factory made free standing , floor mounting dust and vermin proof cubical type interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finally powder coate painting having thickness not less than 100 micronsof finite grey, fully compartmentalized with providing two Nos suitable size of aluminum strip for body earthing and including suitable PCC foundation all as specified for the following :- (a) Incomming :- (ii) MCCB 125 AMPS 4 pole 415 Vollts 36 KA -01 No. (iii) Digital type amp meter 0-200 Amp with CT's 03 Nos. (iv) Digital type voltmeter 0-500 Volts -01 No. (v) Indicating lamps (RYB) 01 set of 3. (vi) Aluminium bus bar rating 200 Amps 3 phase neutral-01 set. (vii) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCCB 100 AMPS 25 KA 415 Volts 4 pole -1 No. (ii) MCCB 63 AMPS 16 KA 415 Volts 4 pole -02 No.

Supply, erecting and fixing in replacement in true vertical position steel tubular swaged pole 8.5 Mtr long type (410 SP -22) conforming to IS 2713 part I & III - 1980 complete with cast iron base plate, pole cap, mild steel, bolts, nuts and screws, welded and reduced section and longitudinal weld seam throughtout entire length of pole including two coats of black bituminous paint throughtout internally and externally upto planting depth and remaining exterior portion of pole with two coats of aluminium paint over a coat of red oxide primer complete including transporting the poles to plating & providing three bends/strap with paint red signal/post office colour 300 mm apart from plinth block & numbering of poles complete all as specified and directed and including foundation with the following :- (a) Excavation in post holes in any type of soil , return filling, well ramming and disposal of surplus soil to a distance not exceeding 50 mtrs from the starting point. (b) PCC (1:3:6 ) type C2 using 40 mm graded stone aggregate as in foundation. (c) PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping , including necessary form work.

M&L earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 4.00 M deep below GL with top edge of plate not less than 3.00 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

Supplying & Fixing GI electrode chemical earthing of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit, to achive earth resistance value less than or equal to 3 Ohme & EN voltage < 02 V , pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and secondary conductor having 80 MM dia. The primary conductor is inserted into secondray conductor and spce between secondary and primary conductor of earthing electrode should be filled with crystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with connecting of 32 x 6 mm GI strip extra, and total depth of earthing electrodes should not less than 3.50 meters. Around the earth electrode earth pit bore hole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC ( ERIC Contains mixture of Silica sulphate, Alumina, Iron Oxide, titanium Oxide, Calcium Oxide, Magnesium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 CI chamber cover all as directed by Engineer-in-Charge. ( Note : If less than 3 Ohme result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system) Make Remedies, Model - RSPL-G803 / MRS agency Model G-80.

Supplying & Fixing Copper electrode chemical earthing of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit ( each set will be in grid of three earthing ) to achive earth resistance value less than or equal to 1 Ohme & EN voltage < 01 V, pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and secondary conductor having 80 MM dia. The primary conductor is inserted into secondray conductor and spce between secondary and primary conductor of earthing electrode should be filled with crystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with connecting of 20 X3.15 mm copper strip extra, and total depth of earthing electrodes should not less than 3.50 meters. Around the earth electrode earth pit bore hole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC ( ERIC Contains mixture of Silica sulphate, Alumina, Iron Oxide, titanium Oxide, Calcium Oxide, Magnesium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 CI chamber cover all as directed by Engineer-in-Charge. ( Note : If less than 1 Ohme result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.) Make Remedies / MRS agency.

Supply & Fix earth continuity conductor or main earthing lead fixed to wall on battten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situatioin for loop earthing etc. as required size 20 X 3.15 mm copper strip complete all as specified and ditected.

Ditto all as per item above but size 32 X 6 mm GI strip, complete all as specified and ditected.

Dimolation and dimantling PCC ( unreinforced) of any description and in any position, complete all as specified and ditected.

M&L PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping , including necessary form work, complete all as specified and ditected.

M&L Preparation of old painted steel surface and painting of steel tubular pole upto 09 RM long applying two coats of aluminium paint on complete poles including cross arms and writing of numbers on pole with black paint in 40 mm font size of letters including surface dressing all around the poles approximetely 01 Sq Mtr area complete all as specified and directed at site.

Provn of bore well, Installation, testing and commissioning of tube wells by:- (i) Development of trail bore by reaming for 98 RM. (ii) Supply and fixing casing pipe of 100 mm bore, reducer, bail plug, well cap, MS strip, iron clamps sockets etc. (iii) Supply and fixing Slotted pipe. (iv) Supply and filling pea gravel. (v) Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water at least for five hrs. (vi) Yied test for the bore well by continiously pumping for 16 Hrs to determine safe pumping yield. (vii) Supply , installation / lowering and commissioning the submersible pump set with strove lined non return valve directly coupled with and including induction motor electric driven 230 Volt, Single Phase 2.0 HP , nine staging , suitable for 40 Mtr head Make CRI/Crompton/Varuna /Penguin. (viii) Supply and fixing steel wire rope (supporting wire) approx- 45 RM and clamp of suitable size complete with nut bolt and washers as required. (ix) Supply and lower submersible copper cable 4.0 Sqmm,1100 Volts, 3 Core all as specified and directed Approx 50 RM. (x) All other acessories required to make submersible pump complete functional.

Material and labour for cutting/tapping the existing CI pipe line of 150 mm bore in position and reducing to required length for inserting of new tee of required size, branches including jointing with lead etc, complete all as specified and directed.

S & F CI fittings for spigot, socket pipes such as, bends( any type radius and angle) , tapers any type (straight bends in increasing , decreasing or double socket etc.) Tee pieces ,single branch, 'Y' junctions , double branch, cross ( all sockets or socket and spigot), collars, caps and plugs suitable up to 150 mm bore, complete all as specified and directed.

Supplying and laying steel water tubing 25 mm bore medium grade galvanised with all fittings like bend, tees socketes union etc. as required laid in trenches/ or on wall / laid under floor/ ceilings complete all as specified and directed.

All as per item No 51 above but 40mm bore, complete all as specified and directed.

All as per item No 51 above but 50mm bore, complete all as specified and directed.

Supply and fix in replacement gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes suitable for 25 mm bore dia of pipe complete all as specified and directed.

All as per item No 54 above but 40mm bore, complete all as specified and directed.

All as per item No 54 above but 50mm bore, complete all as specified and directed.

Supply and laying in repairs ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 16 Sqmm 2 core, complete all as specified and directed.

Supply, installation in repairs , testing and commissioning of the LT feeder pillar for submersible pump outdoor type, factory made free standing, floor mounting with suitable foundation (civil work complete) dust and vermin proof cubical type interlocking arrangement (IP-55 protection) fabricated with approximately 3.16 mm thick CRCA sheet including painted with anti corrosion coating & finnaly polyester powder coated of finite green fuly compartment with providing suitable size of Two Nos aluminum strip for bus bar and internally prewired with appropriate copper wire complete all as specified for the following:- (a) Incomming :- (i) MCB SPN 63 Amps, 2 pole, 230 Vollts with repturing capacity 16 KA - 01 No. (ii) Aluminium bus bar rating 100 Amps, Single Phase & Neutral - 01 set. (iii) Chamber for incoming & outgoing cable. (iv) Digital type amp meter, single phase, 0-20 Amp. (v) Digital type single phase voltmeter( 0-230 Volts) -01 No. (vi) Indicating lamps. (b) Outgoing :- (i) MCB SPN 32 Amps, 10 KA, 230 Volts - 02 No. (ii) Fully automatic online DOL starter 230 V, Single Phase, 50 Hz, AC suitable for 2.0 HP submersible pumping set.

M&L in repairs earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside Welding / brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed.

M&L for Brick work with subclass 'B'bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6.Compete all as specified and directed.

M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick in CM 1:4, complete all as specified and directed.

M&L for 150 mm hard core of broken bricks to gauge exc 63 mm but n exc 100mm. Complete all as specified and directed.

M&L for Cement concrete Type D-2, 1:4:8,(40 mm graded aggregate) as in foundations, filling and mass concrete, compete all as specified and directed.

M&L Virified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed.

M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete.Including 10mm thick cement palster in CM 1:4. Complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

Supply and fix under counter round wash hand basin in white of size 537mm X 439mm x 187mm with complete fittings. Make:- KOHLER..Compete all as specified and directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.

M&L for RCC Nominal mix Type B1 1:2:4 (20mm graded aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like. Complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopingfor columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, compete all as specified and directed.

M&L Formwork to rough flat finish surface of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping).Compete all as specified and directed.

S&F 15mm ,Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, compete all as specified and directed.

S&F 15mm GI Tubes, 'Medium grade', galvanised,with all fitting and fixed complete to walls andceilings or laid in wall or floors, Compete all as specified and directed.

S&F 15mm Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, Compete all as specified and directed.

S&F 15 mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms), Complete all as specified and directed.

S&F 40mm Low density poly ethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed to walls, Complete all as specified and directed.

S&F anodised aluminium powder coating frame for doors, windows ventilator with one or more rebates including cleat for fixing etc, thickness of powder coating 50 micron complete all as specified and directed by Engr-in Charge

S&F Anodised aluminium powder coating window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc thickness of powder coating 50 micron .complete all as specified and directed.

S&F 4 mm thick ACP (Aluminium Composite Pannl) sheet to make shutter.Complete all as specified and directed.

Supply and fix 5 to 6 mm thick slelected qulality glass, mounted on 6 mm thick commercial plywood and fixed to walls with wooden plusgs with chromium plated brass screws and cup wahsers comlete all as specified and directed.

S&F steel work in tubular Post/ trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 including all necessary work as directed by Engr in Charge. Complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated, steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed..

M&L for preparation of surfaces of any description of new steel over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. Complete all as specified and directed.

S&F PVC connections pipe 15mm size with PTMT nuts of length 450mm, Complete all as specified and directed.

S&F grating doom of size 125mm dia of PTMT, (min weight 50grams) complete all as specified and directed.

S&F Soap Dispenser with glass bottle. Cat Part No.: CAN-1135N.Make-Jaquar..Compete all as specified and directed.

Supply and fix soap dish, any type, fixed to plugs with chromium plated brass screws. Complete all as specified and directed.

M&L for Cement concrete type B2, 1:2:4 in foundations, filling and mass concrete, Complete all as specified and directed.

S&F Rotational moulded poly thylene water storage tanks 500 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part Complete all as specified and directed.

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. Complete all as specified and directed.

S&F sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. Complete all as specified and directed.

S&F 15mm Bib taps, swan neck, wall mounted with long swivel spout and wall flange, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, make:- Cera model no F2008251 and equivlant. Complete all as specified and directed.

S&F 2000 Ltrs capacity rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

S&F 25 mm GI Tubes, 'Medium grade', galvanised,with all fitting and fixed complete to walls andceilings or laid in wall or floors. .Compete all as specified and directed.

S&F 25mm Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, compete all as specified and directed.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. Complete all as specified and directed.

S&F 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed.

M/S Satyam Associates

M/S DEEKSHA CONSTRUCTION

M/S Akhilesh Enterprises

M/s Rajeev Kumar

M/s A.K Construction

PANDEY TRADERS

SM CONSTRUCTION COMPANY