Renovation of Quarter No. A 07 and A 05, Jadavpur University Staff Quarter at 47, Central Road, Kolkata 700032.

Plaster (to wall, floor, ceiling etc.) with sand and and raking out joints including throating, nosing and [Excluding cost of chipping over concrete surface]cement mortar including rounding off or chamfering corners as directed …..drip course, scaffolding/staging where necessary (1st floor). (ii) With 1:4 cement mortar (a) 20 mm thick plaster Section-I, Item-1,ii,a

Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size withhexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted andfixed after tying the existing reinforcement on concrete without distributingthe same and with proper scarping and cleaning the reinforcement anddisturbed concrete with wire brush etc. after applying a coat of cementincluding the cost of wire netting I.R.C or X. P. M. & cost of all handling andscaffolding complete as per direction of Engineer-in-charge. a) 20 mm thickPCS [Item 27 page- 40

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,…… completion of works (upto roof of ground floor)a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Section- C, Item-36,a

Reinforcement for reinforced concrete work in all sorts initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and, placing in proper position and binding with 16 gauge black annealed wire at ………………………… bending to correct shape ….. every intersection, complete as per drawing and direction. (i) Tor steel/Mild Steel Section- C, Corrigendum 2, Item No-1(i)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per a) Pakur Variety Section- C, Item-5,a

Cutting chase upto 125 x 150 mm. and subsequent mending of damages (b) in concrete wall [Cement-3.6 Kg/Mtr] Section-B, Item-11,b

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the damages complete. (a) Upto area 2.5 Sq.m Section G- Item 72,a

i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b) 250mm long. Section-G, Item-27,b

Supplying wooden moulding slanting beat of size..approved design to finish the joint between wooden frame ..masonary in true line and level fitted & fixed with … complete as per direction of Engineer-in-charge. a) Teak wood beat Section G- Item-G,38,a

Supplying best Indian sheet glass panes set in putty (as per I.S specification) and fitted and fixed with teak wood beads and nails complete. (In all floors for internal wall & upto 6 m height for external wall) (ii) 4 mm thick Section L- Item-2,ii

Ceiling of commercial ply as per design fitted and fixed complete (excluding the but including necessary wood battens of size 40mm xsupporting framework 20mm). In ground floor, (ii) 6mm thick (a) Sal Local Section-G, Item -12,ii

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work). B231 h) Louvered window i) Top, bottom and side member. (Section- R,Item-1,h)

ii) Louvered Section. (Section- R,Item-1,h)

iii) Cleat angle ( Non-annodized). (Section- R,Item-1,h)

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: v)Louvered window. (Section- R,Item-2,v)

Supplying, fitting & fixing 1st quality Ceramic tiles ....necessaryor by synthetic adhesive & grout materials etc. (A) Floor a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative Section- D,Item -35

(B) Wall (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative Section- D,Item -35

Supplying, fitting and fixing Black Stone slab used in Kitchenslab, alcove, wardrobe etc. laid and jointed with necessaryadhesive Cement mortar (1:2) including grinding or polishingas per direction of Engineer-in -Charge in Ground Floor. (a) Slab Thickness 20 to 25 mm Section- D,Item -15,a

Acrylic Distemper to interior wall, ceiling with a coat of (as per manufacturer's specification) solvent based interior grade acrylic primerincluding cleaning and smoothning of surface. Two Coats Section- J, Item-10

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. Section-K, Item-1,a/b

(b) Priming one coat on plaster or other wooden surface with synthetic oil bound primer of approved quality Section-K, Item-1,a/b

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface etc. on the surface, if necessary : (a) On timber or plastered surface :With super gloss of approved quality- (iv) Two coats (with any shade except white) Section-K, Item-2,a,b

(b) On steel or other metal surface :With other than hi-gloss of approved quality- (iv) Two coats (with any shade except whit e)Section-K, Item-2,a,b

(A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) (ii) Sal : Local. Section G, C, Item-1,ii

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), the cost of hinge and other fittings. In ground floor. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (c) Other Local Wood. Section G, B Item-11,a

Artificial stone in floor, dado, staircase etc with cementconcrete (1:2:4) with stone chips, laid in panels as directedwith topping made with ordinary or white cement …… all materials and labour.In 3rd floor.(Add extra @1.5% for each addl. floor upto 4th floor) 3 mm. thick topping (High polishing grinding on this item isnot permitted with ordinary cement). Using grey cement (ii) 25 mm. thick Section- D, Item-6,ii

Supply of UPVC pipes….. A) Single socketed 3 Meter Length b) 110mm PCS Sanitory / Page - 68, Item - 23

B) Fittings (iii) Door Tee(b) 110mm PCS Sanitory / Page - 68, Item - 23

xi)Door Bend (TS) (110mm) PCS Sanitory / Page - 68, Item - 23

xvi) Pipe clip (b)110mm PCS Sanitory / Page - 68, Item - 23

xxi) 110 X 110 P-Trap 75 mm PCS Sanitory / Page - 68, Item - 23

xviii) W.C.Connectr (450mm long) PCS Sanitory / Page - 68, Item - 23

Supplying fitting and fixing … Anglo-Indian w.c in white vitreaus ………….. Nuts etc. (a) with 'P' Trap PCS Sanitory / Page - 79, Item - 3

Supplying fitting & fixing closet seat of approved make with …………….. Complete. (b) Anglo Indian (ii) Plastic white PCS Sanitory / Page - 81, Item - 10

Supplying fitting and fixing 10 liter P.V.C low-down cistern of ……. coats of painting to bracket etc. approved make without fittings and brackets. PCS Sanitory / Page - 36, Item - 2

S.F& F bibcock or stop cock (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm PCS Sanitory / Page - 6, Item - 7

S.F.& F shower rose of approved brand…..(g) PTMT overhead shower ( Prayag or equivalent ) (i) 75 mm round PCS Sanitory / Page - 3, Item - 3

S.F.& F best quality Indian make mirror 5.5mm thick … 550mm X 400mm PCS Sanitory / Page - 82, Item - 19

S.F&F white vitreous china best quality approved makewash basin with C.I …………… approved paint. (ii) 550mm x 400mm size PCS Sanitory / Page - 7941, Item -