REPAIRS TO FENCING, PATH AND HARDSTANDING AT MD ACCN IN THE AREA OF AGE B/R-I UNDER GE PANAGARH

Amount

Demolition for brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed

M&L for brickwork with modular flyash bricks, straight or curved on plan exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed

M&L for extra for forming fair finish drain channel exceeding 30cm but not exceeding 45 cm inner grith in cement concrete using extra cement complete all as specified and directed

M&L for extra for forming fair finish drain channel upto 30 cm inner girth in cement concrete using extra cement complete all as specified and directed

M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed

Demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

M&L for cement concrete type B-0 1:2:4 (using 12.5mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges complete all as specified and directed

Dismantling post (Wood/Steel or RCC) any section including taking out embedded portion and making good disturbed portion complete all as specified and directed

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC in foundation filling and mass concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed

S&F mild steel posts and struts in fencing including cutting tops to shape as directed ,drilling holes , notching for wire,etc , flat iron fillets ( for securing wire mesh etc.) top section fixed including all necessary drilling,bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc in Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed by the Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4 )and finish smooth & even with using extra cement complete all as specified and directed

M&L for preparation of new plastered surface of wall applying of two coats of cement base paint over a coat of alkali resistant cement primer complete all as specified and directed

M&L for two coats of synthetic enamel paint on new surface of steel over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

Dismantling fencing wire mesh any type complete all as apecified and directed by Engineer- in -Charge

Supply only chain link MS galvanised fencing of mesh size 75 x 75 mm with minimum dia. of wire 3.50 mm ,fixed to MS fencing posts and securing with nuts, bolts and fillets etc and tying with MS binding wire etc by weight per sqm not exceeding 4 kg ,complete all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. (Note : Chain link fencing will be paid separately).

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long complete all as specified and directed

M&L for two coats of synthetic enamel paint on new surface of steel over one coat of red oxide primer including preparation of surface of any description, n.exc 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub bases complete all as specified and directed

M&L for 75 mm thick cement concrete type C2 ,for PCC (1:3:6) (using 40 mm graded stone aggregate) used as in sub base, sub floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for hardcore of broken stone gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for machine pressed precast pre-polished concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

M&L for machine pressed precast pre-polished concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed

M&L for 25 mm thick chequered cement concrete tiles of approved size,set, jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as per specification.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed

Restraining resecuring including making good staples etc, galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed

M&L for providing cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in copings complete all as specified and directed.

M/s BISWAJIT GHOSH

M/S BHATTACHARJEE ENTERPRISE

BISWAS ENTERPRISE

ROY ENTERPRISE

Hooghly Construction Co.

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)

KAZI SAHABUL ALAM

M/S SWAPAN KUMAR MONDAL

M/S N B SEN CONSTURCTION

S. D. Construction Co.