Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹49.9 L+₹9.1 L (22.3%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹53.9 L+₹13.1 L (32.1%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹94,000
Closing Date
12 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO P 280 AND P 154B AT ZANGLI AND PROVN OF THREE URINAL POINTS WITH SOAKAGE WELL ALONG WITH ALLIED INFRA AT CHAKKIGAM UNDER GE 874 EWS
2022_MES_538226_1
GE 874/EWS-29/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
6 documents required · 6 mandatory
₹500
GE 874 EWS
₹94,000
Yes
29 Sept 2022
15 Jul 2022
13 Aug 2022
15 Jul 2022
12 Aug 2022
29 Jul 2022
15 Jul 2022 - 22 Jul 2022
Amount
B/R and E/M Portion
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part there of) complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.
PCC 1:3:6 type C0 using 12.5 mm graded stone aggragate as in padding over roof minimum jhurra 25mm thick to maintain a slope of 1:100 complete all as specified and as directed .
Providing and laying 4mm (-0.2/+0.3) thick APP with miniral finishes (Atactic Polyproplene Polymer) modified perfebricated in five layer, weight not less then 5.6 kg per Sqm water proofing membrane miniral finish, rienforced with non woven polyster mett make as approved including a coat of bitumen primer @ 0.40 ltr/Sqm by the same memberane manufacturar of density 0.87 to 0.89 Kg/ltr at 25 degree C temprature and viscosity 70-160 cps over the the coat of 4mm the 5 layered APP membrane mineral finish shall be laid using butane torch and sealling all joint etc after the surface complete as per standered practice as per manufactur instruction. The vital physical and chemical perimeter of membrane shall as under - (i) tensile stregth in longitudional and transverse direction as 600+/- or 400+/-150 n/5cms (ii)tear strength in longitudional and traverse direction as 300/200n . softning point of membrane not less then 145 degree (iii)Penetration @ 25C D 15-25mm (iv) water tightness 10 kpa (v) the laying of membrane shall be got dione through the authorised applicator of menufacturar only complete all as specified and as directed.
Supply only Liquid water proofing compound.
Complete removal of existing treatment of any type/ description such as destempering work, internal emulsion etc from internal surface of wall and celling with mechanical means /grinder including removal of material from site complete all as specified and as directed.
Appliying acrylic thick wall care putty on internal surface of wall / celing (Thickness vary from 1.5 to 2.5mm as required for desire smoothness and levelling of surface in two or more layer ) by using redymade wall care putty including sand papering after filling the putty to make surface smooth and ready for recieving exteriar painting complete all as specified and as directed.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches n.exc.1.5 m wide and n.exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified.
M&L Hardcore of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders.
M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 as in wall/septic tank/soakage well all as specified and directed.
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M&L Damp proof course of PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) to horizantal or vertical surfaces including formwork using WPC as per manufacturers instructions complete all as specified and directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:4 finisheded the surface even and smooth without using extra cement complete all as specified.
M & L rendering 5mm thick on ceiling surfaces in cement mortar 1:3 complete all as specified.
M & L rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.
Moorim/red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complte all as specified and directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base filling concrete, complete all as specified.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs landing and similar work not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.
Reinforced cement concrete (nominal mix) 1:2:4, type B1 using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc all as specified.
M&L Mild Steel TMT Bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hoopng for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complte all as specified and directed.
M&L for Three coats of white wash on newly plastered surfaces of wall including preparation of surfaces, complete all as specified and directed.
All as per item above but on ceiling complete all as specified and directed.
M&L for preparation of new plaster surface of wall and applying two coat of colour wash complte all as specified and directed.
15mm Pillar taps, cast copper alloy with capstan heads, chromium plated screwd down high pressure with or without lettered 'Hot or 'Cold' with long screwed shanks and flynuts screwd for iron pipe and fixed.
S&F Ball brass valves 20mm bore, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
Nipple suitable for HDPE water tank 20mm bore (Min weight 15mm-38gms/20mm- 45 gms/25mm-65gms).
Rotational moulded polythene 1000 ltr water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.
PVC Connection 15mm size PTMT of length 600mm.
Applying acrylic wall care putty in external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed by Engr-in-Charge. Notes : (i) The prepared surface after wall putty, the contractor will inform to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the Engineer-in-Charge through site order.
M&L for applying 02 coats of oil bound distemper (of approved quality and tint) on treated surface as per manufacturer intructions by using roller to wall surfaces over & including a coat of interior wall primer as recommended for under coat by manufacturer of OBD, complete all as specified and directed.
Applying 02 coats of exterior emulsion paint (light shade) as per manufacturer instructions by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails.
2nd class soft wood wall panelling of good quality wood planed one side and edges tinged and groove or rebate other side and dovetailed joints, chamferred both side fix to exisiting frame with secrate nailed as in wall panneling of 15mm thickness including cornic and beeding as required and applyiong two coats of varnish over a filler coat of thin varnish after prepration of the surface ,complete all as specified and directed.
M&L Veneered decorative plywood 6mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work.
Dismantling timber scantlings 40 sq. cm and over in section, in any position (framed work).
M& L clean sawn Second class soft-wood in scantlings in framed work.
M&L 6mm Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work all as specified and directed.
Taking down chowkhat or frame (without taking off shutter for the frame ) including all Hardware fittings etc exc 1.5 Sqm and n. exc 4.00 Sqm including cutting hole and making good to require shape or holdfast block for new frame complete all as specified and directed.
Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) cement concrete (unreinforced).
M&L Plain Cement concrete 1:3:6 type C2 in foundations, filling and mass concrete complete all as specified and as directed.
Chequered cement concrete tiles 200x200x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment to match shed of tiles, laid over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
M&L Grinding of kota stones with Machine including rubbing and polishing complete all as specified and as directed.
S&F Vitreous China squatting pan, 'Orissa' pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) but including 'P' or 'S' trap including connection/ fittings complete all as directed and specified.
S&F bib tap 15 mm dia standard of PTMT any colour screwed for iron pipe, (minimum wt 90 gms) complete all as specified and directed.
M&L for Cast Iron nahani trap 75 mm dia with gratings including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
S&F PVC (SWR) pipes 75 mm dia any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
Vitreous China wash basin, white, flat back of size 550x 400 mm incl cutting for and pining, in ends of brackets or erecting stand etc, fixed in repairs, complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
S& F 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
Non - skid Ceramic tiles 7 to 8 mm thick coloured (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface complete all as specified and as directed.
Non-skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of ech tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces complete all as specified and as directed.
Joint free glazed ceramic Coloured tiles in vertical surface 300x 200x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface laid over & including 15mm thick cement rendering in cement mortar 1:4 complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of farme made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets foir top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.
Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4.
S&F sinks made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
Toilet paper holders of brass CP fixed to walls with chromium plated brass screws fixed in repair. complete all as specified.
Angle stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed.
S & F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as specified and directed.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms).
Soap dish of CP brass 100 X 150mm size complete all as specified and directed.
S&F PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 300 gms).
Two coats of synthetic enamel paint over a coat of priming on plastered surfaces for New or previously untreated Surfaces of any description over 10cm girth or width, not otherwise described.
S&F Vitreous China wash down water closet pan (padestal pattern), white with integral foot rests (excluding flushing cistern and flush pipe) but including 'P' or 'S' trap including connection/ fittings complete all as directed and specified.
Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store.
M&L for galvanised steel tubes medium grade 15 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittings all as specified and directed.
M&L for Salt-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed in CM 1:1 including necessary fittings all as specified and directed including concrete bed drain pipes complete all as specified and directed.
10 litres, PVC, valveless. syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and pull, including complete all as specified and directed.
S&F waste pipe coupling of PTMT 32mm bore (Half or full thread). (minimum weight 32mm-45gms/40gm-60gm) complete all as specified and as directed.
Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.
Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab.
Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for 3 pin 5A socket outlet on the same board controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.00 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.
Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor
Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor
Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor
Supply and fixing lamp holder bracket type, PVC/polycarbonate type with skirt cap suitable for batten fittings, complete all as specified and direted.Make : Havells/Anchor
Supply and fix LED Bulb 9 Watt. Make Havells/Bajaj.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 IK-09 protection single door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.
Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
Supply and fixing MCB SPN 40 to 63 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core complete all as specified and directed.
Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core complete all as specified and directed.
M&L for submain wiring with two single core PVC FRLS insulated unsheathed flexible copper conductor cable of sze 6 sqmm and one single core PVC FRLS insulated unsheathed flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including PVC casing and caping ISI marked and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge.
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.
Supply & fix sheet metal enclosure MCCB/MCB (VTPN) distribution board vertical Triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection Single door complete with appropriate size bus bar and neutral link complete all as specified.
Supply & Fixing of MCCB 3 Pole, 415 V, fixed type of capacity 100 Amps with breaking capacity 16 KA Complete all as specified and directed.
M/S RJ BUILDERS
MS SHEIKH NADEEM AKBAR
Bidder Name
M/S RJ BUILDERS
M/S FAYAZ AHMAD MIR AND SONS
MS SHEIKH NADEEM AKBAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .