REPAIR AND PAINTING TO STEEL FURNITURE UNDER BSO, GE (CENTRAL) KHADKI.

Amount

A) Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, gluing, providing hinges, denting, applying putty for leveled surface, placing every part in-tact and painting the disturbed portion, as applicable as per drawings. B) Work will be executed where the furniture exist in different User Units/ Md Accn under AOR of GE (C) Khadki including BSO's Furniture Yard as directed by Engineer-in-Charge.

CHAIR CB STEEL WITH ARMS AND WITHOUT ARMS (Drg No.FD-75(M))

Back frame made out of seasoned teakwood duly polished in natural shade including cane work in godrej pattern. The chair shall be fixed with FI 3mm thick 40 X 25mm clips 02 Nos each on either side of back duly welded and also making holes to back frame centre to centre by drilling machine for fixing back frame with required size screws for extra support as directed. (chair CB steel with arms)

Seat frame made out of seasoned teakwood duly polished in natural shade including cane work in godrej pattern. 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. and also making holes to seat frame centre to centre by drilling machine for fixing seat frame with required size screws for extra support as directed. (chair CB steel with arms)

Arm rest made of teak wood duly polished in natural shade as directed by Engr-in-charge.

Back frame made out of seasoned teakwood duly polished in natural shade including cane work in godrej pattern. The chair shall be fixed with FI 3mm thick 40 X 25mm clips 02 Nos each on either side of back duly welded and also making holes to back frame centre to centre by drilling machine for fixing back frame with required size screws for extra support as directed. (chair CB steel without arms)

Seat frame made out of seasoned teakwood duly polished in natural shade including cane work in godrej pattern. 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. and also making holes to seat frame centre to centre by drilling machine for fixing seat frame with required size screws for extra support as directed. (chair CB steel with out arms)

PVC caps of top frame of chairs CB steel with and without arms (as approved) all as specified and directed.

Hard rubber shoes std quality as directed by Engr-in-charge/ GE

TABLE OFFICE CLERK STEEL (Drg No.FD-84(M) / 1004 or similar)

Top made out of 18mm thick preleminated particle board exterior grade with 4mm thick teak wood beading alround with french polished complete, rest all as per drg.

Drawers complete made of 1.00mm thick sheet of same shape & size as existing along with the handle as per drg.

Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge

Locks of 6 lever with duplicate key of approved quality as approved by GE/Engr-in-Charge.

Hard rubber shoes std quality as approved by Engr-in-charge/ GE

TABLE DINING ORs ALUMINIUM TOP (Drg No.FD-165)

Removing of old UNSV top of table dining ORs and S&F new top made out of 18mm thick commercial plywood BWR grade covered with 22 guage aluminium sheet on top side by nailing appropriate size nails to plywood as per drg and as directed by Engr-in-Charge

Legs made out of 25mm square MS tube of 1.6mm thick by arc welding to the frame all as directed by Engr-in-Charge.

Hard rubber shoes of approved quality to legs of table dining.

TABLE 3' X 2' WITH DRAWER STEEL (Drg No. FD-1008 or similar)

Top made out of 18mm thick preleminated particle board exterior grade with 4mm thick teak wood beading alround with french polished complete, rest all as per drg.

Drawer complete made of 1.00mm thick MS sheet of same shape & size as existing along with the handle as per drg.

Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge.

Hard rubber shoes of approved quality.

TABLE 3' X 2' WITH OUT DRAWER STEEL (Drg No.FD-1007 or similar)

Top made out of 18mm thick preleminated particle board exterior grade with 4mm thick teak wood beading alround with french polished complete, rest all as per drg.

Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge

Hard rubber shoes of approved quality.

TABLE 3' X 3' STEEL (Drg No.FD-1009 or similar)

Top made out of 18mm thick preleminated particle board exterior grade with 4mm thick teak wood beading alround with french polished complete, rest all as per drg.

Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge

Hard rubber shoes of approved quality.

Table Bed Side Map (Drg No.FD/E6/MAP/15 (R))

Top of size 450 x 450 mm made out of 18mm thick preleminated particle board exterior grade all as per drg.

Complete small Drawer/cabinet made of 18 mm thick pre laminated Particle board Exterior grade with PVC edging allround and with telescopic channel. Rest all as per drg.

Complete Large Drawer/cabinet made of 18 mm thick pre laminated Particle board Exterior grade with PVC edging allround and with telescopic channel. Rest all as per drg.

Back of table bed side map made of 6 mm thick Ply screwed to H/W stoper and 18mm thick prelaminated particle board complete all as per drg.

Sides made out of 18mm thick preleminated particle board exterior grade complete all as per drg.

Handle CP Steel as approved by GE/Engr-in-Charge.

PVC Shoes std quality all as per drg

Gas Welding point on Broken part of steel furniture shall be carried out such as Almirah large steel with shelf/Wo shelf and Half hanging, Almirah med steel/small with shelf, Locker bed side steel, Table office clk steel, table 3x2 steel w/d, Locker SKD 562 of chair CB steel with arms/ without Arms, chair verandah, table dining, table office, officer/clerk steel, chair easy steel, teapoy verandah & Steel items of various drgs etc. welding shall be done continuously type, including rubbing and finishing to smooth surface. (Drg No. FD-243, FD-1032, FD-1046, FD-1004, FD-1008, FD-1007, FD-562, FD-1014, FD-362, FD-1003, FD-75, FD-165(M), FD-75(M), FD-256 (Steel items of various drgs)

FORM WITHOUT BACK (Drg No. FD-1027, FD-77 (M) )

Seat Plank made out of 1st class teak wood as existing and all as per specification given in drawings along with M&L for french polishing to wooden surface exposed to view interior and exterior with spray machine after smothening of surface applying suitable colour and wood filler (Wood sealer) incl applying wax for depressed surface before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge

Repair / Replace frame of form without back with 25mm square MS tube of 1.6 mm thick not less than 300mm long by arc welding where ever required as directed by Engr-in-Charge

Hard rubber shoes of approved quality.

FORM WITH BACK (Drg No.FD-78 (M) )

Seat Plank made out of 1st class teak wood as existing and all as per specification given in drawings along with M&L for french polishing to wooden surface exposed to view interior and exterior with spray machine after smothening of surface applying suitable colour and wood filler (Wood sealer) incl applying wax for depressed surface before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge

Back Plank made out of 1st class teak wood as existing and all as per specification given in drawings along with M&L for french polishing to wooden surface exposed to view interior and exterior with spray machine after smothening of surface applying suitable colour and wood filler (Wood sealer) incl applying wax for depressed surface before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge

Repair/ Replace frame of form with back with 25mm square MS tube of 1.6 mm thick not less than 300mm long by arc welding where ever required as directed by Engr-in-Charge

Hard rubber shoes of approved quality.

BOOK CASE STEEL CABINET WITH GLASS (Drg No. FD-90, FD-1028 )

Removing of broken glass from the exsting and replacing the same of size 650x225x4mm or as existing rest all as per drawing .

Lock for four sliding door with duplicate key all as per drawing. MAKE :- Link/ Godrej/Equivelent of approved quality as approved

Handle CP Steel to Book Case Steel all as per drawing and as approved by GE/Engr-in-Charge.

CHAIR WRITTING STEEL WITH PADDED CUSHION SEAT & BACK (Drg No. FD/E6/MAP12 or similar)

Taking out old/unserviciable seat and supply & fixed new seat made of 12mm thick hot pressed plywood with acrylic/poly propylene fabric (range not less than 300/RM) and mouled polyurethene foam 50 mm thick and 50 density (Make-Sleepwell(Cool Gel-S)/Godrej) with PVC lipping all round complete all as shown on drawing.

All as above but unserviciable back complete.

Taking out unserviceable/broken frame and S&F new cantilever type MS tublar frame powder coated made out of 25x10mm sec as per drg.

Arm rest of chair writing steel & supply & fixing new PU arm rest as per drg

Material and labour for upholstry of Tapestry cloth of seat & back, along with malmal cloth to covering the seat and back of chair. Tapestry cloth should not be less than Rs. 250/- Mtr along with PVC lipping around the back of chairs as directed by Engr- In- charge.

Shoes as per drg

CHAIR REVOLVING EXECUTIVE (Drg No.TP/FD-1025 or similar)

Upholstry of Tapestry cloth of seat & back, along with malmal cloth to covering the bottom / back of seat and back. Tapestry Cloth should not be less than Rs.200/Mtr , to make complete as shown in drgs along with PVC lipping around the back of chairs or as directed by Engr-In-Charge

Removing the u/s prong and S&F new prong as existing and all as specified on drg and as directed by Engr-in-charge.

Hydrolic gas lift as existing and all as specified and shown on drg and as directed.

Removing the u/s hand rest and S&F new readymade handrest made out of black integral skin polyurethane with 75-85 shore'A' hardness & reinforced with MS insert with scratch and wheather resistant and also to have slope towards front.

Removing the u/s wheel and S &F new nylon 10.5mm dia zinc plated MS Castors as existing and all as specified and shown on drg and as directed.

Removing of old / unsv existing Moulded cushion from seat of chair, S&F 50 mm moulded foam with 40 density along with tapestry cloth of not less than Rs.200/Mtr as directed by Engr- In charge.

Removing of old / unsv existing Moulded cushion from back of chair, S&F 50 mm moulded foam with 40 density along with tapestry cloth of not less than Rs.200/Mtr as directed by Engr- In charge.

CHAIR SCHOOL HAND BOARD (Drg No. FD/E6/MAP/05 or similar available on ground)

Removing the u/s plastic seatback (joint) and S&F new seat back with approved quality and pattern as specified and directed.

Hand board made out of 18 mm thick Particle board exterior grade complete all as per drg and as directed by Engr-in-charge.

Supply and fix new 25mm dia hollow steel pipe along with Hinges arrangement complete on RHS for supporting the openable hand board inserted in 20mm dia MS rod welded to frame complete as described in drg after removing the old UNSV of the same.

Shoes as per drg

CHAIR VERANDAHA (MAP) (Drg No. FD/E6/MAP/II/06)

Removing the u/s plastic seat/back and S&F new seat back with approved quality and pattern as specified shown on drg and as directed.

Chair Varandah (Drg No.FD-19(M), FD-256/359)

Material and labour for repair / fixing of broken parts of chair varandah by welding (Gas Welding) as existing where ever required as directed.

Material and labour for replacing of broken MS pipe of chair varandah by welding (Gas Welding) with 20mm dia MS Conduite pipe not less that 300mm long where ever required as directed.

Removing of old broken plastic cane and recaning of chair varandah with & including new plastic cane of 03/04mm semi round, white colour, best quality as approved by GE/Engr-in-charge.

PVC shoes 20mm dia at bottom of legs.

ALMIRAH MEDIUM STEEL WITH SHELVES & 1/2 S X 1/2H ( Drg No.TP/FD-1034 / FD-1032/ FD-114 )

Legs made out of 1mm thick MS sheet as existing by welding / revitting as per drg and as directed.

Shelves made of 1.00mm thick MS sheet of same shape & size as existing

3 way Locking device of same shape & size as existing and as per drg.

CP Handle 150mm long as approved.

Lock 6 levers to almirah of Make- Link/ Godrej /Equivalent as approved .

ALMIRAH LARGE STEEL WITH SHELVES (Drg No.FD-67 (M) /1031)

Legs made out of 1mm thick MS sheet as existing by welding / revitting as per drg and as directed.

Shelves made of 1.00mm thick MS sheet of same shape & size as existing

3 way Locking device of same shape & size as existing and as per drg.

CP Handle 150mm long as approved.

Lock 6 levers to almirah of Make- Link/ Godrej /Equivalent as approved .

LOCKER BED SIDE STEEL (Drg No. FD-1029)

Legs made out of 1mm thick MS sheet as existing by welding / revitting as per drg and as directed.

Shelves made of 1.00mm thick MS sheet of same shape & size as existing

Hasp and staple of same shape & size as per drg.

Steel handle 100mm long of approved make.

Hanging rod CP of 20mm dia to locker as approved .

LOCKER STEEL FERROR TYPE 'A' (Drg No.TP)

10mm hasp and staple of same shape & size as existing and as directed by Engr-in-charge.

Steel handle 100mm long of approved make.

Hanging rod CP of 20mm dia to locker as approved .

Hinges to locker as approved .

Teapoy Verandah (Drg No.FD-255/FD-35 (M) FD-208)

Top made out of 18mm thick preleminated particle board exterior grade with 4mm thick teak wood beading alround with french polished complete, rest all as per drg.

Repairing frame of table with new 20mm round MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge

Shoes as per drg

DESK STEEL (Drg No.FD-107/FD-1021)

Removing unserviceable box top from desk and S&F new box top of size as per drg made out of 18 mm thick prelaminated Particle board exterior grade complete with 4mm thick teak wood beading alround with french polished, rest all as per drg and as directed by Engr-in-charge.

Legs made out of 25mm round MS tube of 1.6mm thick by arc welding to the frame as existing and as directed by Engr-in-Charge.

Repairing frame of table by S&F with new 25 mm round MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge

PVC shoes at bottom of legs.

Teapoy Verandah MAP (Drg No.FD/E6/MAP/17)

Top made out of 18mm thick preleminated particle board exterior grade with 4mm thick teak wood beading alround with french polished complete, rest all as per drg.

PVC shoes at bottom of legs.

PAINTING OF STEEL FURNITURE :- Material and labour for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour internally and externally by spray painting complete all as specified and as directed by Engr-in-charge.

CHAIR CB STEEL WITH ARMS (Drg No. FD-75(M))

CHAIR CB STEEL WITHOUT ARMS (Drg No.FD-75(M))

TABLE OFFICE CLERK STEEL (Drg No. FD-84(M) / 1004)

TABLE DINING ORs ALUMINIUM TOP (Drg No.FD-165)

TABLE 3' X 2' WITH DRAWER STEEL (Drg No.FD-1008)

TABLE 3' X 2' WITH OUT DRAWER STEEL (Drg No.FD-1007)

TABLE 3' X 3' STEEL (Drg No.FD-1009 or similar)

Table Bed Side Map (Drg No.FD/E6/MAP/15 (R))

FORM WITHOUT BACK (Drg No. FD-1027, FD-77 (M))

FORM WITH BACK (Drg No. FD-78(M))

BOOK CASE STEEL CABINET WITH GLASS (Drg No. FD-90, FD-1028)

CHAIR WRITTING STEEL WITH PADDED CUSHION SEAT & BACK (Drg No. FD/E6/MAP12 or similar)

CHAIR REVOLVING EXECUTIVE (Drg No.TP/FD-1025 or similar)

CHAIR SCHOOL HAND BOARD (Drg No. FD/E6/MAP/05 or similar)

CHAIR VERANDAHA (MAP) (Drg No.FD/E6/MAP/II/06)

Chair Varandah (Drg No.FD-19(M), FD-256/359)

ALMIRAH MEDIUM STEEL WITH SHELVES & 1/2 S X 1/2H (Drg No. TP/FD-1034 / FD-1032/ FD-114)

ALMIRAH LARGE STEEL WITH SHELVES (Drg No.FD-67 (M) /1031)

LOCKER BED SIDE STEEL (Drg No. FD-1029)

LOCKER STEEL FERROR TYPE 'A' (Drg No.TP)

Teapoy Verandah (Drg No.FD-255/FD-35 (M) FD-208)

DESK STEEL (Drg No.FD-107/FD-1021)

Table office Officer steel (Drg No.FD-1003/84(M))

Racks steel 6'.3"X36"X24" (Drg No.TP)

Racks steel 6'.3"X36"X18" (Drg No.TP)

Rack steel 10'.6"X36"X18" (Drg No.TP)

Rack steel 7'.3"X36"X15" (Drg No.TP)

Rack steel 1905 X 915 X 760 (Drg No.TP)

Trestle store room iron (Drg No. FD-1043, FD-86)

Book Shelves open large steel (Drg No.FD-69)

Rack Steel adjustable 6 tier Steel 1905 X 915 X 605 (Drg No. FD-1038)

Rack shoes steel (Drg No.FD/E6/MAP/02(R) )

FMN/MNF/MNI Set (Drg No.FD-220

Tepoy verandha (MAP) (Drg no.FD/E6/MAP/17)

Imprint Digitech (BID ID -3254428)

M/s National Traders (BID ID -3259745)

Mahesh Traders (BID ID -3261137)