Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAccepted-AOC 1 VILLAGE SIRDI BHARMOUR BHARMOUR CHAMBA HIMACHAL PRADESH 176315 | CHAMBA | HIMACHAL PRADESH | 176315 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹7.7 L+₹1.5 L (24.9%)Rejected-AOC | L2 | Rejected-AOC L2 bidder | |
| 3 | L3₹13.4 L+₹7.2 L (117.4%)Rejected-AOC MOHALLA KASAKRA PO SULTANPUR DISTRICT TCH CHAMBA HP 176310 | CHAMBA | CHAMBA | HIMACHAL PRADESH | 176310 | L3 | Rejected-AOC L3 bidder | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical EMD/Fee not received |
Tender Value
₹6.0 L
EMD Value
₹12,000
Closing Date
3 Dec 2019, 3:00 pmClosed
Sr.Manager Elect.PnC
Chamera-III Power station, Karian, Distt Chamba (H.P.)-176310
Retroreflective painting / Road marking and construction of drain from office road junction point to field hostel at Karian colony of CPS-III
2019_NHPC_518311_1
NHCH-3/Cont/WC-392/2019-20/445
Open Tender
Civil Works
Works
60 days
Karian Distt Chamba (H.P.)
Please refer Tender documents.
5 documents required · 5 mandatory
₹590
Yes
CHEP-III, NHPC Limited
₹12,000
Yes
29 Jan 2020
13 Nov 2019
6 Dec 2019
13 Nov 2019
3 Dec 2019
13 Nov 2019
Amount
Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge.
Demolition below G.L. upto 1.50 Metres depth and disposal of unserviceable materials within 20 metres lead. Un-reinforced cement concrete : above 15 cm. Thickness.
Excavation in drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth upto a lead of 20 metres and lift upto 1.50 metres disposed earth to be levelled and neatly dressed: Pick Work:
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring,shutering,strutting and propping etc.with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs, and removal of the same forinsitu-reinforced concrete & plain concrete work in:Foundation, footing bases of columns etc. and mass concrete.
Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:: Foundation and plinth.
Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 50mm thick.
Repairs to plaster in patches of 2.50 Sq.M. and under and 10to 15mm thick including cutting the patch in proper shape and re-plastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with:-Cement Mortar 1:4
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt, loose or softened paint.
Extra over item No.8 for every sub sequent coat of water proofing cement paint of approved brand and manufacture.
Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter :--With Enamel paint other than white
Extra over item No.10 for every subsequent coat of paint With enamel paint other than white
Steel work welded in built up section, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in gratings framed bars, ladders, railing, brackets & similer works.
15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:3 (1Cement:3 Sand).
Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
Yoginder Sharma
AJAJ MOHD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .