Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹21.6 L+₹1.7 L (8.75%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹21.8 L+₹2.0 L (9.95%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹22.0 L+₹2.2 L (10.9%)Rejected-Finance MCB Z 2 13519 ST NO 4 GREEN AVENUE BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance Rejected |
Tender Value
₹24.8 L
EMD Value
₹49,600
Closing Date
6 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Faridkot
GE Faridkot Military Station
Provn of certain Revenue works under AGE B/R (M) at Faridkot Mil Stn
2022_MES_536677_1
GE FRD-30/2022-23
Open Tender
Civil Works
Item Rate
240 days
GE Faridkot
Class E Category a i
8 documents required · 8 mandatory
₹500
GE Faridkot
₹49,600
Yes
13 Aug 2022
8 Jul 2022
8 Aug 2022
8 Jul 2022
6 Aug 2022
23 Jul 2022
Amount
Dismantling of plain or corrugated steel/fibre glass sheeting, any gauge in roof covering complete all as specified and directed .
S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed .
S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed .
Dismantling of timber scantlings 40 Sqcm and over in section, framed work,in any position complete all as specified and directed
M&L for 2nd class hard wood in scantling ,clean swan,timber framed and fixed complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .
M&L for Machine cut kota stone slab flooring, 20-25 mm thick , set and jointed in cement slurry over & including 20 mm thick screed in cement mortar 1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
M&L Machine cut kota stone slab 20-25 mm thick as in skirting, set and jointed in cement slurry over & including 15 mm thick rendering in cement mortar 1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying finishes complete all as specified and directed .
S&F Glazed ceramic coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed .
Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .
All as per Srl item No. 12 here-in-before but except bricks complete all as specified and directed .
S&F anodised aluminium snap grid frame work for false ceiling of grid 605x605mm, complete all as specified and directed .
S&F hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size & length 60mm and expansion hold fasterners 12.5mm dia,40mm long complete all as specified and directed.
S&F 12mm thick gypsum board as in ceiling fixed with screws as per manufacturer's instructions complete all as specified and directed.
Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but n.exc 2sqm each & refixing the shutter in same opening complete all as specified and directed
S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed.
S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed
S&F Framed work such as grills, gratings etc. with ends of bars shoulderd and/or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,cooler stand and similar work conforming to Fe290, Gde-E-165 complete all as specified and directed.
M&L for PCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed
S&F 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed
S&F 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed
S&F Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified and directed .
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded all as specified and directed
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed
M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .
S&F 3mm thick, figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed .
S&F Solid wood moulded grain printed PVC door frame of size 50mm x 95 mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. square tube, egdes will be painted to match printed sheets complete all as specified and directed .
S&F Factory Made Solid PVC wood grain printed Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed
S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.
S&F aluminium anodised barrel tower bolts,200 mm long of extruded section, fixed to doors with screws complete all as specified and directed .
S&F aluminium anodised barrel tower bolts,125 mm long of extruded section, fixed to doors with screws complete all as specified and directed .
S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .
S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .
S&F 100mm mild steel butt hinges, medium weight,cold rolled complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for preparation of old steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed
M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of old wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed .
M&L for complete removal of existing treatment of old decorated surfaces of wall, soffits / facia of chajja/ roof slab by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying two coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed
M&L for complete removal of existing treatment of old decorated surfaces of wall, soffits / facia of chajja/ roof slab by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying two coats of cement base paint complete all as specified and directed.
Taking up or down 15mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
Taking up or down 20mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
S&F Galvanised steeI tubing,15mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
All as per item No 54 here-in-before but except tubes
S&F Galvanised steeI tubing,20mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
All as per item No 56 here-in-before but except tubes
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 20 mm dia of pipe complete all as specified and directed.
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 15 mm dia of pipe complete all as specified and directed.
S&F in repair Stop valve/angle valve with flange, cast copper alloy,fancy type,chromium plated, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed .
S&F in repair bib tap long body, chromium platede, with crutch or butter fly handle, screwed down, screwed for 15mm bore pipe & fixed complete all as specified and directed .
S&F in repair pillar taps,chromium plated ,cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed.
S&F in repair 10 litres PVC,valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm including cantiliver CI/angle iron brackets, CP brass waste coupling 32mm bore with rubber washer and PVC waste pipe 32mm bore complete all as specified and directed .
S&F in repair PVC connection, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F brass chromium plated shower rose 125mm size with shower arm 15mm size, 195mm long with bend of 45 degree with flange all as specified and directed.
S&F Towel rail, 450mm long of PTMT, fixed with and including chromium plated brass screws and wooden and plastic cleats ( minimum weight 170gms ) complete all as specified & directed.
S&F cast iron or mild steel peg set, 175mm to 250mm with hook fixed with wall complete all as specified and directed .
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.
Dismantling CI/PVC pipe of 75/100mm dia alongwith fittings ,below or above GL/laid in floors/fixed to walls jointed in cement mortar complete all as specified and directed.
S&F 100mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed.
S&F 75mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed.
S&F in repair CI bends, diminishing pieces or tapers, bore of pipe 100 mm complete all as specified and directed .
S&F in repair CI bends, diminishing pieces or tapers, bore of pipe 75 mm complete all as specified and directed .
S&F in repairs Cast iron floor trap, long neck, 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed.
S&F cast iron branch pieces, bore of pipe 75mm , single (equal or unequal), ordinary of inverted (spigot or socket type) or with parallel branches complete all as specified and directed .
S&F cast iron vent cowls ,bore of pipe 75mm complete all as specified and directed .
S&F 10mm thick,vitrified ceramic, light shade, polished (coloured & shade as approved) tiles of size, n.exceeding 0.36 sqm as in floors etc set and jointed in neat cement slurry over & including 15 mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed
S&F 10mm thick,vitrified ceramic, light shade, polished (coloured & shade as approved) tiles of size, n.exceeding 0.36 sqm as in vertical surface such as skirting, dados & risers to steps etc over and including 10mm thick rendering in cement mortar 1:3 and pointed in coloured cement to match complete all as specified and directed
S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet, inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall .
S&F 5mm thick PVC Sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed
S&F anodised aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on aluminium (minium thickness of powder coating 50 micron) as per the specification. The top & bottom horizontal members and vertical members adjacent to walls shall be fixed with floor, ceiling, walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners complete all as specified and directed
S&F anodised Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,anodised aluminium fitting such as peg stays 150mm long (01 no), hinges type B-21, 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.
S&F Mild steel Mortice lock, vertical type, size 100 mm, 4 levers complete all as specified and directed.
M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
M&L for 5.5 mm thick, frosted sheet glass ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed.
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in position complete all as specified and directed.
S&F in repair stainless steel decorative drapery rod (colour as approved) 20mm dia of approved pattern & design including decorative knobs (wall side and free side) & stainless steel brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.
S&F in repair 15mm dia stop cock, cast copper alloy, chromium plated, concealed type with long shank with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .
S&F Brass Chromium plated basin mixer for mixing hot & cold water screwed down for 15mm bore iron pipe (as per sample) complete all as specified and directed.
S&F Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe (as per sample) complete all as specified and directed.
S&F EWC vitreous china, twin action, one piece wash down water closet pan with Soft Close Duroplast Seat Cover coloured complete all as specified and directed
S&F in repair vitreous china urinal ,half stall type , white,waste coupling of PTMT including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar, including connections to flushing pipe and outgoing pipes complete all as specified & directed .
S&F in repair vitreous china counter wash basins, size 470x470mm, white flat back to be fixed on counter/ RCC slab including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed Make :- CERA Model No SKU S2030115 or equivalent in makes specified in PS
S&F sheet glass shelf assembly, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F Tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed .
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .
S&F in repair PVC (SWR) bends, any radius ,110mm bore complete all as specified and directed.
M&L for reinforced cement concrete type B1, 1:2:4 using 20 mm graded crushed stone aggregate as in slab supported on walls, beams and columns in floor, roof, landings, deck slab and in shelves complete all as specified and directed.
M&L for TMT bars 6mm to 8mm dia cut to length bend to shape required including cranking, bending , hooking end and binding with and incl mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.
M&L for use and waste of form work to soffits of suspended slabs such as floor or roof slab, landing and similar work not exceeding 200mm thick (Horizontal or slopping) for rough finished surfaces of concrete complete all as specified and directed.
M&L for 18 to 20mm thick Granite (of approved type and colour) work (table rubbed and polished) as in cooking platforms, stair case landing or steps and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with approved shade of granite including cutting and moulding the edges half round on exposed side complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5mm thick rough cast plaster over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surface complete all as specified and directed Note : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over the rendering coat.
M&L for 25 to 30 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment and provn of stainless steel screws of suitable dia & length with plastic rawl plugs complete all as specified and directed .
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed .
M&L for complete removal of existing treatment of old decorated surfaces of wall, soffits / facia of chajja/ roof slab by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying two coat of distemper oil emulsion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed .
M&L for preparation of newly plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed .
M&L for preparation of old plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed .
M&L for complete removal of existing treatment of old decorated surfaces of walls by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts, treating oil & greasy spots,filling depression to make smooth surfaces with wall care putty and applying two coats of Acrylic smooth exterior paint over and including one coat of exterior primer, using hand rollar complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall, soffits / facia of chajja/ roof slab and applying two coats of Acrylic smooth exterior paint over and including one coat of exterior primer, using hand rollar complete all as specified and directed.
Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed
M&L for 75 mm thick cement concrete 1:3:6 type C2( using 40mm graded crushed stone aggregates) as in plinth protection/path finishing surfaces even and fair complete all as specified and directed .
Demolition of concrete (un-reinforced) in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of ) and disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified
M&L for rendering 10 mm thick in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces as in roof complete all as specified and directed . Note : WPC will be measured and paid separately
M&L for applying evenly a tack coat of in industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed .
M&L for polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm conforming to IS specification with lap joints 100mm wide complete all as specified and directed
M&L for lime concrete 1:2:5 (Lime:surkhi:brick ballast(40mm)) terracing in roof complete all as specified and directed .
M&L 40mm thick brick tiles laid on lime concrete and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed .
All as per item No 121 here-in-before above but except brick tiles complete all as specified and directed .
Supply only Liquid water proofing compound
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .
S&F Machine pressed precast concrete interlocking paver blocks,any shape and size, confirming to IS-15658-2006 of 60mm thickness,M-35 grade, laid with grey cement and pigment over and including 40mm thick sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed .
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed .
M&L Pre-cast cement concrete 1:3:6, type C1 (using 20mm graded crushed stone aggregates ) as in kerb stone, set in cement mortar 1:4. including necessary form work , excavation for embedding blocks in ground to depth as directed and finishing exposed surface even and smooth complete all as specified and directed .
M&L PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregates) in coping,back of kerb stone, rounded or chamfered on edges, slightly rounded or chamfered angles and throating, and necessary formwork (in sides of path/paving) complete all as specified and directed
M&L for preparation of newly plastered brick /concrete surface and painting with two coats of synthetic enamel paint (white/golden yellow) complete all as specified and directed
Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.
Taking down carefully existing MCCB,MCB,DB TPN/SPN & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.
Taking down carefully existing submain wiring 2/4 run with earthing cable & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.
Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLS with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit of suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc, covered with 2.8mm thick plastic laminate Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers, painting terminal boxes inside and outside with one coat of red oxide primer including continuous earth wire of size 1.5 Sqmm PVC stranded copper conductor unsheathed, insulated, stranded (Green colour) connected to common earth point dolly for for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed .
All as per Ser item No 134 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on same board with other switches complete all as specified and directed .
All as per Ser item No 134 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on independent board complete all as specified and directed .
All as per Srl item No. 134 here-in-before for Switch socket combination (multi purpose) 6 Pin 15 Amps 230 volts point to be controlled by one switch and wiring with 2.5Sqmm FRLS PVC unsheathed copper conductor and FRLS cable 2.5 Sqmm PVC insulated earth wire on independent board.complete all as specified and directed
S&F PVC Lamp holder with back plate suitable for batten fittings complete all as specified and directed .
S&F LED bulb 1 x 10 watt Lamp having luminous efficiency warranty 2 years complete all as specified and directed .
S&F complete set of tube light fitting, 1x20 watt LED (4 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Havells Cat Part No LUMILINEBS20WLED865SPCWH/Bajaj Cat Part no 830379 20WCDL/Crompton Cat Part No LDLL20-CDL
S&F complete set of tube light fitting, 1x10 watt LED (2 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Havells Cat Part No LHEXACP7IN1W010/Bajaj Cat Part no BCLSB 10W/Crompton Cat Part No LDLL10-CDL
S&F ceiling rose, three terminals, PVC polycarbonate, isolated body with bakalite 20mm back plate complete all as specified and directed .
S&F Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 6Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 6Sqmm for continous earth wire drawn into and including PVC concealed conduit of suitable size complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length)
S&F switch piano, flush type, single pole, one way, 5 /6 Amp,230 V,AC supply complete all as specified and directed .
S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 volts AC supply complete all as specified and directed.
S&F socket outlet, two in one, 5 Pin 5 Amps, 230 Volt, AC supply, complete all as specified and directed .
S&F socket outlet ,2 in 1, 5/6 pin, 15/16 Amps, 230 volts ,AC supply complete all as specified & directed.
S&F Sheet metal enclosure for DBs,TPN, double door, 415 Volts, 4 ways, vertical type and space for MCCB complete all as specified and directed .
S&F Sheet metal enclosure for DBs,SPN, double door, 230 Volts,8 ways with 200 amps rated bus bar complete all as specified and directed .
S&F MCB SP 5 to 32 Amp, 230 volts, B Curve with breaking capacity 10 KA complete all as specified and directed
S&F MCB, SPN, 32 amps, 230V, B Series with breaking capacity 10 KA complete all as specified and directed
S&F MCCB 3 Pole,adjustable type ,415 V, 100 Amps with breaking capacity 36 KA complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.5m deep and 1.5m wide, for foundation etc or manholes,piers,shafts etc not exceeding 10 Sqm on plan and getting out complete all as specified and directed.
Returning, filling in including spreading, leveling, watering & and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed .
Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed .
M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.
Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.
M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, buried directly in ground vertically (depth of pit not less than 2.25m below normal ground level), with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to electrical equipment/GOD/LA and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI medium grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of precast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Schedule Part-I (2009), complete all as specified and directed. Note(s):- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with TMT bar 8mm dia both ways @100c/c. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt. (v) Quoted lump sum / rate shall be inclusive of above all provisions.
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, including taking out existing one complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.
M&L for Steel water tubing of 25 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 25 mm dia of pipe complete all as specified and directed.
S&F GI pipe, light grade, 40mm bore, for cable protection, fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed. Note : (i) Excavation and earth work shall be measured and paid separately.
S & F exhaust fan ,steel body, AC single phase, 4 blades with louver shutter suitable for operation on 220/230 volts of 300mm sweep and all fixing arrangements like wall hole, material etc complete all as specified & directed
S&F in repair 1X10 watt LED retrofit type bulk head fitting luminaries, die cast, aluminium alloy body, heat resistant, prismatic glass cover with specially designed gasket, lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 HZ complete all as specified and directed.
Supply & fixing Energy efficient Ceiling fan complete with blades, down rods, electronic type regulator & accessories, 230 V,1200mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor including writing of MES number (Black, Roman, Italic or Indian) n. exc 30cm height complete all as specified and directed
Supply and fix electric water heater, storage type, steel body with copper inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc with nut bolts, inlet and outlet connection with PVC tube for cold water inlet and PVC reinforced tube for hot water outlet complete all as specified and directed
Supply and fixing LED luminaire 600 mm x 600mm, 35/36 watt, 220 V,AC, Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed with following specification :- (a) Lumen efficiency of luminaire should be more than 100 Lumen per watt. (b) Voltage operating range : 140 to 270 volts. (c) Temp operating range : Minus 10º C to Plus 50º C. (d) Power factor : Minimum 0.95. (e) THD : Max 10%. (f) IP rating : IP20.(g) CRCA pre coated housing. (h) LED driver of the make as of the luminaire,(j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Inbuilt Surge protection device for 4 KV.
S&F in repair Sheet Metal Enclosures Plug metal clad SP&N with a two pin and earth plug and socket with MCB SP 20 Amps suitable for working on 230 volts AC complete all as specified & directed.
Supply, fixing and testing LED street / security light fitting of 25 Watt fitted on 4 to 9 meter high octagonal pole / wall/Swan neck pole including LED lamps complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy. The luminaries shall be monolithic construction, totally enclosed, dust and water proof with minimum IP-65 protection as per IS-10322-1982 (Part-I) with latest amendments and input voltage range 140-300V, AC, frequency 50-60 Hz, PF should be more than 0.9 with total harmonic distoration. THD (I) less than 15%, cool white colour and lamp starting time should not be more than 10 second, Fittings should be provided with 10 KV surge protection. Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300V, AC. Driver should also have double phase protection, no load, open circuit and short circuit protection. LED light fittings should be suitable for ambient temperature from - 10 degree centrigrade to 50 degree centigrade and humidity level 10% to 90% RH. Covers should be polycarbonate/ toughened glass to ensure minimum IP 65 degree protection. Cover should not degrade due to heating and ageing. The efficient of LED luminaries system shall be more than 85 lumens per watt and must be certified by LM-79 test report fixed on and including connecting with twin core twisted flexible copper conductor cable 1.5 Sqmm including taking down existing one complete all as specified and directed. Note :- (a) Bidder shall submit test report of LED street light fitting from accredited test laboratory for LM-79 (b)Bidder has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of CA. The product will be replaced free of cost in the following cases : - (i) Manufacturing defects (ii) Failure due to mechanical and electrical impact, (iii) Drop in lumen (or lux at 1m) below 90% of claimed values of lumen (or lux at 1m) of the LED/ luminairies. (c) All LED light luminaire must meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/ Section 13 (d) Scope of work shall include supply and fixing street light fittings on poles which includes required T & P and accessories etc if any, making connection, testing etc complete. No extra payment is admissible on these account.
S&F Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 4 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 4 Sqmm for continous earth wire drawn into and including PVC concealed conduit of suitable size complete all as specified and directed . Note :- Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length) Note :- A Sum of Rs.35,765.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 32 (Schedule of credit) of Tender Documents.
SHRI GANESH CONSTRUCTION CO.
NEW AMRITSAR CONSTRUCTION COMPANY
N.G BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .