Loading
Loading…
Loading…
Tender Value
₹2.3 Cr
EMD Value
₹2.7 L
Closing Date
13 Jan 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
Yes
19/12/2025 16:00
Lowest to Highest
60 days
Expenditure
+ Capital Works)
Above/Below/Par
GENL
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited (for details correction slip no. 01 vide L. No. 2022/CE-I/CT/GCC 2022/Policy dt. 4.07.2022 to be referred.) The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.(For details pl. refer GCC April 2022 with amendment, if any)
The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure VIA and shall be valid for a period of 90days beyond the bid validity period(For other details GCC april 2022 para 5 of part -I to be referred with amendment,if any)
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(For details pl. refer GCC April 2022 with amendment ,if any)
Similar Nature of works means-Electrification / Rewiring of Service or Residential building / Yard / HT / LT substation work / HT/ LT cable work / street lighting / platform or building lighting management / circulating area Lighting / Electrical overhead power supply work / Electrical pump work etc.
22 conditions · 15 needing a document upload
FOR DOCUMENT TO BE SUBMITTED BY THE TENDERER FOR TENDER ALONG WITH THE OFFER. OFFERS WITHOUT THESE DOCUMENTS WILL BE SUMMARILY REJECTED as detailed given in checklist of tender booklet attached in document.
Documents as per the requirement of financial eligibility criteria: The tenderers shall submit requisite information as per 'Annexure-VIB' indicating Annual Contractual turnover data for the previous 3/4 years, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. In case the tenderer is other than Joint Venture (JV) firm, tenderer has to submit all the documents mentioned below, as the case may be: (a) Sole Proprietorship firm : An undertaking on suitable stamp paper to this effect clearly mentioning PAN number. (b) HUF : (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (c) Partnership Firm :(i) A notarised copy of partnership Deed or Copy of Partnership deed registered with the Registrar. (ii) A notarized or registered copy Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LPP in which they were/are partners/ members. Any Concealment /wrong information in regard to above shall make the ineligible or the contract shall be determined under clause 62 of the standard general conditions of contract.(e) Company registered under Companies Act-2013 : (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (f) LLP (Limited Liability Partnership ) registered under LLP Act 2008: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (g) Registered Society & Registered Trust:(i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against Society /Trust.(iv) A copy of Rules & Regulations of the Society.
(a) Sole Proprietorship firm : An undertaking on suitable stamp paper to this effect clearly mentioning PAN number.
(b) HUF : (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.
(c) Partnership Firm :(i) A notarised copy of partnership Deed or Copy of Partnership deed registered with the Registrar. (ii) A notarized or registered copy Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LPP in which they were/are partners/ members.
(d) Company registered under Companies Act-2013 : (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.
(e) LLP (Limited Liability Partnership ) registered under LLP Act 2008: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members.
Tenderer should submit copy of PAN Card along with their tender.
The Tenderer shall submit copy of Goods and Services tax (GST) Registration Certificate containing GST Registration Number.
FOR DOCUMENT TO BE SUBMITTED BY THE TENDERER FOR TENDER ALONG WITH THE OFFER. OFFERS WITHOUT THESE DOCUMENTS WILL BE SUMMARILY REJECTED as detailed given in checklist of tender booklet attached in document.
Registered Society & Registered Trust: (i)A copy of the Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed(iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Rewiring of station and service buildings at various stations over NGP division.
NGP-L-2025-T-28R24~CR
NGP-L-2025-T-28R24
Open
Works - General
12 Months
Nagpur, Maharashtra
₹0
₹2.7 L
13 Jan 2026
16 Dec 2025
30 Dec 2025
19 Dec 2025
41 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,31,21,452.9 | ||
| — | 16000.00 | — | — | ||
| SETC of Normal point wiring for FT fitting, fan & 5 Amp socket in modular type switches through PVC insulated single core multi stand 1.5 Sqmm 1100 v grade copper conductor with 1 Sq.mm earth continuity wire. | — | — | — | 61,98,400 | |
| — | 15000.00 | — | — | ||
| SETC of concealed point wiring for light fitting, fan, call bell, Exh/ fan, 5/6 Amps Plug /socket in modular type switches through PVC insulated single core multithreaded 1.5 sq.mm 1100V grade copper conductor with 1 Sq.mm earth continuity wire. | — | — | — | 71,60,400 | |
| — | 3000.00 | — | — | ||
| SETC of concealed Power point wiring with 2.5 Sq. mm copper wire for 5/15 Amps plug point in modular type switches with 1.5 Sqmm earth continuity wire. | — | — | — | 16,59,090 | |
| — | 700.00 | — | — | ||
| SETC of surface mounted / flush type power unit complete with modular plate 4M, 25A MCB, starter, plug & socket for AC as per IS & IE rules and as per site requirement. | — | — | — | 3,89,816 | |
| — | 15000.00 | — | — | ||
| Supplying & erecting mains with FRLSH copper PVC insulated wire Size of 2x2.5 Sq. mm. main wire with earth wire laid in Conduit/ trunking /inside pole/Bus bars or any other places. | — | — | — | 5,84,850 | |
| — | 30000.00 | — | — | ||
| Supplying & erecting mains with FRLSH copper PVC insulated wire Size of 2x4 Sq. mm. main wire with earth wire laid in Conduit/ trunking /inside pole/Bus bars or any other places. | — | — | — | 14,88,600 | |
| — | 10000.00 | — | — | ||
| Supplying & erecting mains with FRLSH copper PVC insulated wire Size of 2x6 Sq. mm. main wire with earth wire laid in Conduit/ trunking /inside pole/Bus bars or any other places. | — | — | — | 7,29,200 | |
| — | 1000.00 | — | — | ||
| SETC of electronic regulator modular type. | — | — | — | 4,64,750 | |
| — | 100.00 | — | — | ||
| "Supply, fixing,testing & commissioning of MCB DB MCB single phase with RCCB in m.s. enclosure, I/C-DP MCB of MCB 32A - 1No. & DP RCCB of 32A - 1No., O/G:SP MCB of 6A-20A - 4Nos., as per specifications." | — | — | — | 3,03,702 | |
| — | 200.00 | — | — | ||
| SETC of single phase DB capacity 40 Amp. RCBO for incomer and various type SPMCB 6-32 Amp (4x6A, 2x10A & 2x16A) for outgoing 8 Nos complete. | — | — | — | 9,10,000 | |
| — | 100.00 | — | — | ||
| SETC of Three phase Distribution Board having 63 Amps 300 mA 4 pole RCBO-1 no and SP MCB 6-32 Amps-8 Nos (4x6A,2x10A & 2x16A) on each phase as per requirement complete. | — | — | — | 12,42,540 | |
| — | 1000.00 | — | — | ||
| Provision of LT PVC insulated, armoured, PVC sheathed Allu. Conductor cables Size of 4 Core 16 Sq. mm. with aluminium lugs, glands suitable nut bolt etc. | — | — | — | 1,24,900 | |
| — | 1000.00 | — | — | ||
| Provision of LT PVC insulated, armoured, PVC sheathed Allu. Conductor cables Size of 4 Core 25 Sq. mm. with aluminium lugs, glands suitable nut bolt etc. | — | — | — | 1,60,830 | |
| — | 500.00 | — | — | ||
| Provision of LT PVC insulated, armoured, PVC sheathed Allu. Conductor cables Size of 4 Core 50 Sq. mm. with aluminium lugs, glands suitable nut bolt etc. | — | — | — | 1,04,565 | |
| — | 200.00 | — | — | ||
| Supply and erection of GI Pipe "B" class 50 mm pipe medium grade. | — | — | — | 48,052 | |
| — | 50.00 | — | — | ||
| Provision of maintenance free earthing as per RDSO specification no. RDSO/PE/ SPEC/ PS/0109- 008(REV'0') complete. | — | — | — | 6,98,659.5 | |
| — | 1000.00 | — | — | ||
| Supply and erection of GI Flat of size 25x3 mm from earth pit with GI nut Bolt suitable size. | — | — | — | 87,320 | |
| — | 100.00 | — | — | ||
| Provision of thermoplastic cable JB of size 88x88x53, IP 66/67 " salt water proof" with heavy duty connector for light fitting. | — | — | — | 62,615 | |
| — | 20.00 | — | — | ||
| SETC of Busbar box having 200 Amp 4 pole bus complete with locking arrangement. (Including 1 No MCCB arrangement up to 200 Amp) | — | — | — | 3,89,038 | |
| — | 20.00 | — | — | ||
| Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/ trip alarm contact and MCCB should have phase barriers both sides,with insulation withstand capacity 800V, no line-load bias in provided enclosure/ panel complete. | — | — | — | 3,14,125.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .