REPAIR /REPLACEMENT OF LT PANEL MAINT REPAIR OF APFC PANEL AND OTHER CONNECTED WORKS AT DRDE GWALIOR REPAIR REPLACEMENT OF INTERNAL WIRING DISTRIBUTION BOARD ELECTRIC FITTING AND FIXTURES AND REPAIR OF GEYSER/FANS AND OTHER CONNECTED WORKS AT DRDE G

Amount

S&F automatic power factor control relay of 12 stage operating Voltage - 230 V AC and current Input - 1A or 5 A,Steps- 12 relay outputs ,Supply Voltage - 1Ph 415 VAC (-40% to +20% ),Measurement Voltage : 3Ph 3 wire 415 VAC (-40% to +20% ) ,Operating temperature : 0 to 70 º C , of M/S EPCOS CAT NO.BR6000,PFC CONTROLLER-BR-6000-R-12- Material Code - B44066R6012R 230N-1 or equivalent including testing, connecting, commissioning in such a way to avoid "controller hunting" complete as in repairs as specified and as directed having following features:- (a) Microcontroller logic for measurement. (b) User friendly operation. (c) Control mode : binary , unequal and user defined. (d) Multifunctional LCD display. (e) Single CT sensing for balanced loads. (f) Individual harmonic measurement upto 15th order. (g) Three CT sensing for unbalanced load. (h) Dual target Power Factor setting useful for utility and DG mode operation, (j) Automatic synchronization. (k) Separate 3 CT monitoring of healthiness of Capacitor within Panel. (l) Data logging. (m) RS 232 in front and RS 232/485 switchable connection at rear. (n) Step operation indication on LCD display plus LED which facilitates viewing from a distance. (o) Unique facility of including 'Fixed Capacitor Bank' for purpose of Transformer compensation. This can be set such that the controller doesn't ‘see' this capacitor. (p) Unique external temperature sensing by PT100. (q) Settable alarm facility - undervoltage,overvoltage and so on. (r) Settable auxiliary outputs - 2 Nos for Alarm, etc. (s) Dynamic Power Factor Controller (Transistorised) available in16 steps without PT100 facility available. (u) EMI/EMC type tested.

M&L for repair the Unserviceable APFC panel by servicing and renewals of burnt / U/s Power/Control wiring and spare parts to achieve Power Factor upto 0.99 for the capacity upto 75 KVAR complete all as specifies and directed by Engineer-in-Charge.

All as per ser item No 2 here-in-before but for capacity 100 to 150 KVAR.

All as per ser item No 2 here-in-before but for capacity 175 KVAR Note for item 2 to 4 (i) Rate quoted by contractor deemed to be included for renewal of burnt copper wiring, copper lugs and other necessary screws,nuts and bolts etc. (ii) The spare parts to be replaced shall be measured and paid separately as per respective items of the schedule. (iii) Penalty will charged @ Rs 100.00/day/panel till the completion of the work to contractor in case of average PF falling below 0.98 after the period of two months of the date of acceptance of tender.

S & F in repairs 10 KVAR power factor correction capacitor Heavy Duty Long life rectangular box type, self standing units of modular construction with sheet metal enclosure, self healing property, PU resin as impregnant with safety device in the form of pressure sensitive (over pressure) mechanical interrupter including wire for use on 440V (AC), 3 phase, 50 Hz,(Series B32459) AC conformance to Standards IEC 60831-1 2/96, IS 13340 with MPP film with heavy edge including testing, commisioning as in repairs complete all as specified and directed. Make : EPCOS/ L&T/ Seimens

All as per ser item No 5.00 here-in-before but of capacity 15 kVAr .

All as per ser item No 5.00 here-in-before but of capacity 20 kVAr .

All as per ser item No 5.00 here-in-before but of capacity 25 kVAr

S&F in repair power capacitor duty contactor 240 volts suitable for 10 kVAR including testing connecting commissioning complete all as specified and directed. Make : L & T / Siemens/ EPCOS

All as per ser item No 9.00 here-in-before but for 15 kVAr .

All as per ser item No 9.00 here-in-before but for 20 kVAr .

All as per ser item No 9.00 here-in-before but for 25 kVAr

S&F in repair HRC fuse link,Type HG,offset, size F1, 2 - 16 amps cap base/holders make Havells or equivalent of Schneider/ Siemens L&T complete all as specified and directed.

S&F in repair HRC fuse link,Type HG,offset, size A2, 16 To 32 amps cap , Fuse base/holders. Make : Havells or equivalent of Schneider/ Siemens/ L&T complete all as specified and directed

S&F in repair HRC fuse,Type HQ,offset, size A3, 35 to 63 amps cap ,Fuse base/holders. Make : Havells or equivalent of Schneider/ Siemens / L&T complete all as specified and directed.

S&F in repair HRC fuse,Type HQ,offset, size A4, 125 amps cap ,Fuse base/holders. Make : Havells or equivalent of Schneider/ Siemens / L&T complete all as specified and directed.

S&F in repair in repairs Fuse holder A2 type, suitable for 4 to 32 Amps bolted fuse links . Make L & T or equivalent of Schneider/ Siemens / HPL complete all as specified and directed.

S&F in repair Fuse holder A3 type, suitable for 35 to 63 Amps bolted fuse links Make L & T or equivalent of Schneider/ Siemens / HPL complete all as specified and directed.

S&F in repairs Fuse holder A4 type, suitable for 80 to 125 Amps bolted fuse links Make L & T or equivalent of Schneider/ Siemens / HPL complete as in repairs all as specified and directed.

S&F in repairs Solid state relay of 55 to 60 Amp swithing the capacitor bank complete all as specified and directed. Make- Angro/Tar

S&F in repairs thyrestor controller relay 75 amp complete all as specified and directed. Make- Angro/Tar

S&F in repairs thyrestor controller relay 125 amp complete all as specified and directed. Make- Angro/Tar

M&L for control wiring of the panel with 440V 10 Sq mm PVC insulated stranded single core copper conductor cable (FR-LS) conforming to IS for power circuit, the wire ends will be copper ferruled including disconnecting and removing the unserviceable wire complete connecting testing all as specified and directed.

All as per ser item No 23.00 here-in-before but 2.5 Sqmm cable.

S&F digital Ammeter in replacement for measuring alternating current of range : 0 - 450 A flush type 96x96MM size, Make AE/Schneider/ABB

S&F digital Voltmeter in replacement for measuring alternating current voltage of range : Range 0-500 V flush type 96x96MM size. Make AE/Schneider/ABB

S&F in replacement indoor resin cast ring type current transformer of ratio 800/5 Amps, accuracy - 15VA, Class - 5P10.

Painting to electric control panel of E/M installations by cleaning the existing old paint with the help of mechanical tools such as wire brush, scraper and sand paper from the surface of panel and painting the prepared surface with two coat of synthatic enamel paint of approved shade over a coat of red oxide primer complete all as specified and directed.

M & L for sheet metal work for repair to electric panel doors, bus bar cover and accessories mounting supports for alignment with front door with 2 mm thick MS sheet duly painted with super enameled paint over one coat of red oxide primer including necessary cutting, welding and fixing complete.

M & L in repairs Earthing complete with galvanished earth plate electrode of size 600 x 600 x 6.00 mm buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth strip 32 x 4mm as earthing lead by means of bolts, nuts, check nuts and galvanised iron or steel including earth work in any type of soil,PCC work in 1:3:6 pit and RCC 1:2:4 type B-1 pit cover reinforced with 6 mm dia ms bar 75 mm c/c 10 mm dia handle, charcoal salt 15cm alternate layer and around the earth plate as shown in electrical plate no 3 of SSR Part I 2010, 20 mm dia watering pipe medium grade 1.70 mtr long GI protection pipe light grade 40mm dia from earth pit to main board including necessary pit cover complete all as specified and as directed.

S&F in repairs, Breaker control switch (Trip-Neutral-close), TNC with 2NO + 2NC SPR RTN complete all as specified and as directed.

S&F in replacement Rotary Type A/M Switch, 1 Pole, 2 Way with Off, Make - KAYCEE//L&T/SIEMENS. complete all as specified and as directed.

S&F Flush head Push Button Green/Red colour with 1 NC Block, Make - L&T complete all as specified and as directed.

S&F in replacement multi function meter having LCD Display,96 x 96 sq.mm Flush mounted case, accuracy class 1.0 capable of measuring Instantaneous, Average, Maximum and Total Current from 50A to 6000A and voltage from 120V AC to 300V AC Phase to Neutral, Phase to Phase Voltage, Instantaneous, Average, Maximum and Total Active Power KW, Instantaneous, Average, Maximum and Total Reactive Power KVAR, Instantaneous, Average, Maximum and Total Apparent Power KVA, Instantaneous and Total Power Factor, Frequency complete all as specified and as directed. Make - L&T/ Scheinder/Legrand/HPL

S&F in repairs instrument Cooling fan , 3000 RPM, 230 Volts 50 Hz complete within the panel including cutting of a suitable sized hole on the panel body and wiring with 1.5 Sqmm copper conductor cable and MCB SPN 6 Amps all complete complete all as specified and as directed.

S&F in renewals capacitor cooling Exhaust fan 230 volts complete complete all as specified and as directed.

S&F in replacement LED indicator - R/Y/B/G 240 V AC complete all as specified and as directed.

S&F MCB TP 63 Amps 10 KA 'C' Series 415 Volts all as specified .

S&F in repairs MCCB 125 Amps 3 pole, 415 V, breaking capacity 16 KA & connected accessories complete as specified and as directed

S&F in repairs MCCB 160 Amps, 3 Pole, 415 V, Adjustable type, with breaking capacity 36 KA including spreader terminals & connected accessories complete as specified and as directed.

S&F in repairs MCCB 200 Amps, 3 Pole, 415 V, Adjustable type, with breaking capacity 36 KA including spreader terminals & connected accessories complete as specified & directed.

S&F in repairs MCCB 250 Amps, 3 Pole, 415 V, Adjustable type, with breaking capacity 36 KA including spreader terminals & connected accessories complete as specified & directed..

S&F in repairs MCCB 350 Amps, 3 Pole, 415 V, Adjustable type, with breaking capacity 36 KA including spreader terminals & connected accessories complete as specified & directed.

S&F in repairs MCCB 400 Amps, 4 Pole, 415 V, Adjustable type, with breaking capacity 36 KA including spreader terminals & connected accessories complete as specified & directed.

S&F in repairs MCCB 630 Amps, 4 Pole, 415 V, Adjustable type, with breaking capacity 50 KA including spreader terminals & connected accessories complete as specified & directed.

S&F in repairs ON load changeover with phase Barriers & Handle with door interlock kit is integral part of the Changeover Switch ,with SS enclosure 400 Amps, 4 Pole, 415 V, AC, 50 Hz complete all as specified & directed. Make :- Havells /L&T / Schnieder / Siemens

M&L for repairing / servicing the existing U/S Air Circuit Breaker of 800 Amp capacity L&T/Crompton make for proper functioning (tripping) on overload and earthfault by replacing the wornout parts, tighting all cable ends incuding replacing the U/S lugs etc, cleaning the dust by blower all as directed by Engineer-in-Charge. Note:- (i) Wornout/Us parts of ACB will be paid & measured separately under respective item of schedule. (ii) The servicing of ACBs will be done only throgh authrised rep of OEM.

Supply only Lockable trip push button (LTPB) kit of 800 Amps Air circuit breaker .

Supply only contact spring.

Supply only moving contact.

Supply only Door interlock

M&L for repairs to main electrical panel at sub stations by tightning the all loose connections of the cable ends & replacing the damaged/US/burnt aluminium lugs of required sizes, insulating/secure the weak insulated portion of cable endsinside the panel by taping with good quality of insulation tape, clean the dust by air blower all as specified and as directed.

Dismantling and Taking Out old unserviceable LT Panel and Supply, installation, Commissioning and testing LT panel board of size 1200 x 1000 x 300 mm (Approx) for 3 phase, 4 wire, 415 Volts, AC, 50 Hz supply, Outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for Outdoor applications having suitable shape/ size canopy on top, made out of 3.15 mm thick MS sheet with using 50mm x 50mm x 6mm angle iron frame and supports, duly finished with powder coated of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement for each switchgear and including PCC work for fixing panel legs 45 cm above ground level and Bus bar of aluminium conductor suitable shape and size for 3 phase rating of 600 amps and for neutral 400 Amps rating including taking out end connectinons of the existing cables and fixing the cable with the panel using new lugs and glands of suitable size, separate cable alley for outgoing cables including following switchgear & controls.

Disconnecting, taking out and removing old existing unserviceable underground, LT cable of any description and in any position complete including taking down protection pipe,PCC Cover/Bricks etc all as specified and directed by the Engineer-in-Charge for the following sizes:35 Sq mm to 70 Sqmm

Supply, laying, jointing and testing XLPE/ P.V.C insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade of any description and any make laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed by the Engineer-in-charge for the following sizes .

35 Sqmm 3.5 core

50 Sqmm 3.5 core

70 Sqmm 3.5 core

95 Sqmm 3.5 core

Excavation in trenches in soft/loose soil not exceeding 1.5 metre deep and not exceeding 1.5 metre width and getting out including forming bottom surface to required slope/gradient for laying cables/protection pipes etc complete all as specified and directed by Engineer-in-Charge including removing cable covers carefully & stacking properly for re-use all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers of 25 cm thick after the cables etc. are laid, jointed & tested complete all as specified and directed.

Removal of surplus excavated spoil not exceeding 50 metre distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 metre above the starting point complete all as specified.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. Note:-Punned thickness shall be measurement & paid.

Supplying & Laying Sub Class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection all as specified and directed by Engineer-in-Charge.

Disconnecting & Taking out old U/S joints and Supplying, Fixing, jointing and testing for provision of straight through joints, epoxy type with epoxy jointing materials, suitable for XLPE, LT Cable, 1100 Volts grade, for the following sizes of cables all as specified and directed by the Engineer-in-Charge.

10 Sqmm to 16 Sqmm 2 core

25 Sqmm to 50 Sqmm 3½ core

70 Sqmm to 120 Sqmm 3½ core

150 Sqmm to 185 Sqmm 3½ core

240 Sqmm to 300 Sqmm 3½ core

Taking down copper/aluminium point wiring (light, fan, socket or power ) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L for point wiring with 1.5 sqmm multi stranded PVC insulated unsheathed copper conductor cable FRLS in and including PVC concealed conduit of size 20 mm dia for one light point or fan point or bell point controlled by one way switch on plastic laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 1.5 sqmm copper conductor FRLS continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specifications complete all as specified and as directed.

M&L for point wiring for 3 pin socket outlet, 5 amps, independent, with 2.5 sqmm multi stranded PVC insulated unsheathed copper conductor FRLS cable in and including concealed PVC conduit of size 20 mm dia plasitc laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 2.5 sqmm copper FRLS conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specification complete all as specified and as directed.

M&L for point wiring for 3 pin socket outlet, 5 amps, independent, but below the switch boarch of light points in the same vertical plane with 2.5 sqmm multi stranded PVC insulated unsheathed copper conductor FRLS cable in and including concealed PVC conduit of size 20 mm dia plasitc laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 2.5 sqmm copper FRLS conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specification complete all as specified and as directed.

M&L for point wiring for 3 pin socket outlet, 15 amps, independent, with 4 sqmm multi stranded PVC insulated unsheathed copper conductor FRLS cable in and including concealed PVC conduit of size 20 mm dia plasitc laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 2.5 sqmm copper FRLS conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specification complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm multi stranded PVC insulated unsheathed copper conductor cable FRLS in and including PVC concealed conduit of size 20 mm dia forOne light point controlled by two 5/6 Amp two way switch. on plastic laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 1.5 sqmm copper conductor FRLS continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specifications complete all as specified and as directed.

M & L in repair Sub main wiring with two single core PVC FRLS insulated cable 4 sqmm (Nominal dia) copper conductor multistrand and drawing in and including S&F PVC concealed conduit 20 mm dia ISI marked, 1X4 sqmm multistrand copper conductor PVC FRLS green unsheathed cable for earth continuity complete all as specified and directed.

M & L in repair Sub main wiring with two single core PVC FRLS insulated cable 6 sqmm (Nominal dia) copper conductor multistrand and drawing in and including S&F PVC casing caping 25 mm width ISI marked, 1X6 sqmm multistrand copper conductor PVC FRLS green unsheathed cable for earth continuity complete all as specified and directed.

M & L in repair Sub main wiring with 4 single core PVC FRLS insulated cable 10 sqmm (Nominal dia) copper conductor multistrand and drawing in and including S&F PVC conduit 32 mm dia ISI marked, 2X 10 sqmm multistrand copper conductor PVC FRLS green unsheathed cable for earth continuity complete all as specified and directed.

M&L for taking down old unserviceable and supply & lay / passing through pipes cable FR PVC insulated & PVC unsheathed 650 / 1100 Volt Grade As per IS 694 multistranded copper conductor of size 3 core 1.5 Sq mm. for interconnection of cable looping box to street light fitting/ post top lantern / security light etc all as directed.

M&L for taking down old unserviceable and supply & lay / passing through pipes cable Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Havells Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed)Flexible Cables, 1100 Volts Conforming to IS: 694 1.5 Sq mm all as directed.

M&L for taking down old unserviceable and supply & lay / passing through pipes cable Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Havells Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed)Flexible Cables, 1100 Volts Conforming to IS: 694 2.5 Sq mm all as directed.

M&L for taking down old unserviceable and supply & lay / passing through pipes cable Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Havells 3 Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed)Flexible Cables, 1100 Volts Conforming to IS: 694 2.5 Sq mm all as directed.

M&L for taking down old unserviceable and supply & lay / passing through pipes cable Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Havells 3 Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed)Flexible Cables, 1100 Volts Conforming to IS: 694 4 Sq mm all as directed.

M&L for taking down old unserviceable and supply & lay / passing through pipes cable Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Havells Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed)Flexible Cables, 1100 Volts Conforming to IS: 694 4 Sq mm all as directed.

S&F in replacement switch piano type 6 Amp one way AC 230 volts complete all as specified and as directed.

S&F in replacement switch piano type 6 Amp two way AC 230 volts complete all as specified and as directed .

S&F in replacement switch socket outlet 2in - 1, 6 Amp 5 pin AC 230 volt complete all as specified and as directed.

S&F in replacement switch Socket outlet 2 in 1, 5 pin 5 Amp and 15 Amp multi purpose socket outlet AC 230 volt complete all as specified and as directed.

S&F ceiling rose of size 65 x 50mm 3 terminal AC 230 volt complete all as specified and as directed.

S&F lamp holder angle holder back light type with base plate suittable for 230 volt complete all as specified and as directed.

S&F door bell AC 230 volt ding dong single phase complete all as specified and as directed.

S&F in replacement MCB SP 6 to 32 Amps 10 KA 'C' Series,240 V all as specified.

S&F MCB SPN 40 to 63 Amps 10 KA , 'C' Series 240 V all as specified .

S&F MCB TPN 63 to 100 Amps 10 KA 'C' Series 415 Volts all as specified .

S&F in repair metal clad socket ,two pin and earth , 25 Amps MCB SP, 230 Volts suitable for metal clad sheet enclosures complete all as specified and directed.

S&F in repair metal plug top, two pin and earth , with single pole MCB SP 32 Amps, 230 Volts complete all as specified and directed.

S&F in repair metal plug top, three pin and earth , with three pole MCB TP 40 Amps, 230 Volts complete all as specified and directed.

S&F in repair metal plug top, three pin and earth , with four pole MCB 63 Amps, 230 Volts complete all as specified and directed.

S&F in repairs of sheet metal enclosures Single pole and neutral with two pin earth plug and socket with plug top including single pole MCB 20 Amps complete all as specified and as directed.

S&F in repairs of sheet metal enclosures for DBs when MCB to used SPN 8 way double door powder coated factory made with separate neutral and earth links with IP 43 protection, fixed on wall /metal board/wooden board including making all incomming and outgoing connections with suitable copper lugs including disconnecting & taking out old existing enclosure complete all as specified and as directed.

All same as per item srl No 31 above but SPN 12 way.

All same as per item srl No 31 above but TPN 4 way.

Supply & fixing in repair 9Watt LED lamp, 220-240Volt, AC 50Hz, energy saving type, complete all as specified. Make : Surya /Bajaj /Philips /CG / Havells

S&F Supply and fixing LED tube lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. complete all as specified and directed

S&F Round shaped recess mounted 15 watt, 220 V AC LED luminaire , full output luminaire for modern offices with CRCA powder coated body and new generation high effciency PMMA diffuser to provide soft glare free light complete with driver,holders & LED Lamps suitable for modular / POP/ Gypsum ceiling complete including disconnecting and taking out old U/S light fittings all as specified.

S&F in repairs for LED Tubelight rod 20 watt 240 volts complete all as specified and as directed.

Supply & fixing in repair 9 Watt LED inverter lamp of back up 6 hrs, 220-240Volt, AC 50Hz, energy saving type, complete all as specified. Make : Surya /Bajaj /Philips /CG / Havells

S&F in repair decorative recess mounted 36 watt, slim panel with super bright LED's & highly efficient light-smoothing optics to deliver superior illumination and energy savings 220 V AC LED luminaire 600 x 600 mm , full output luminaire for modern offices with CRCA powder coated body and new generation high effciency PMMA diffuser to provide soft glare free light complete with driver,holders & LED Lamps suitable for modular / POP/ Gypsum ceiling complete including disconnecting and taking out old U/S light fittings all as specified.

S&F surface and wall mounted 20 Watt Inverter LED tube light fitting with Lithium Ion battery with backup time upto 4 hours,driver,holder with extruded aluminium housing with polycarbonate diffuser input voltage AC 230 V, 50 HZ complete all as specified and directed

S&F in repairs of bulk head luminarie with LED 10 watt lamps Hexagonal shaped with engineering plastic housing and frame with opal PMMA defuser complete including disconnecting and taking out old U/S light fittings all as specified and directed by Engineer in charge.

S&F energy saving decorative wall mounting LED Lighting fixtures as mirror light made out of poly corbonate with high output diffuser, 2 feet , 10 watt LED and making connections complete all as specified and directed by Engineer in charge.

S&F in repair new ultra bright 18W LED PLL with very high efficiency light in existing 2G11 lamp holders of Model No PHOTONULTRAPLL419 of Havells or equivilliant in Crompton/Surya complete all as specified and directed.

S&F in repairs plastic laminated bakelite hylem sheet of size 12 cm x 12 cm , 3mm thick, cut to required sizes and shapes including making holes and necessary cuttings for fitting of switches/ sockets/ regulators complete all as specified and directed

All as per Item No. 44 above but of size 12cm x 20cm

All as per Item No. 44 above but of size 20cm x 25cm

PVC Rectangular block for mounting switches, sockets, regulators etc.with 3 mm thick plastic laminates sheet cover of size 100x100x50 mm deep complete all as specified and directed

All as per Item No. 47 above but of size 200x150x50 mm

M & L in repairs of PVC insulated twin core flexible copper cable of size 40/76 Guage complete all as specified and as directed.

S & F in repair Post top lantern LED type 20 watt, 230 V AC, outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete including making electrical connection with three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed.

M&L in repairs for winding of AC ceiling fan motor 1200mm any make of fan with super enameled copper winding wire of existing size including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections complete all as specified and as directed.

M&L in repairs for winding of Exhaust fan motor 300 - 380 mm sweep with super enameled copper winding wire of existing size including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with three core copper flexible wire of size 40/ 0.0076 mm of length not more than one mtr. with each fan complete all as specified and as directed.

Supply and fixing, in repairs the ball bearing of size 6200 / 6201 complete all as specified and as directed.

All as per srl item No 53 here-in-before but of size 6202 complete all as specified and as directed.

Reshaping of mild steel shaft of ceiling fan to proper fixing the same including necessary lathe (machine) work complete all as specified and directed.

S&F in repairs of fan regulator, electronic type, AC 230 volts suitable for 1200mm/ 1400mm sweep ceiling fan, stepped range, hum free complete all as specified and as directed.

Supply and fixing in repairs capacitor AC 220 volts 2.5 to 3.15 mfd complete all as specified and as directed.

S & F installation , testing and commissioning in repair of pressure die-cast aluminium housing with high power LED bldg security light fitting with IP-66 , 1x 30 Watt , fixed in position with and including 40 mm dia light grade GI Pipe made to shape not less then 1.2 Mtr long for mounting fitting with and including suitable size duly painted MS FI 40 x6mm clamps with nut and bolts , washers making electrical connection with and including three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed

S&F PVC self adhesive electrical insulation tape of size1.80cmx6.5mx0.125mm all as specified and directed

Dismantling and strip opening Water Heater 230 volts 25/35/50 Liters capacity 1500 / 2000 watt rating, taking out geyzer assemply elements and other connected accessories, descaling, cleaning of water tank, tubes assembly after repair reassembling ,Electric supply lead 3 core, flexible, PVC insulated and sheathed stranded copper conductor, 1100 Volts grade, size 2.5 Sqmm (nominal area), replacement of U/S 3 pin top 15 amp, reinstallation and connecting testing after satisfactorily serving and repairs complete all as specified and as directed.

S&F in repairs of Syphon assembly complete suitable for 25/35 ltr water heater ISI marked complete all as specified and as directed.

S&F in repairs of Syphon assembly complete suitable for 50 ltr water heater ISI marked complete all as specified and as directed.

S&F in repairs of PVC connection heat resistant 24'' long ISI marked complete all as specified and as directed.

S&F in repairs of Sheet metal bottom cover having two halves circle complete all as specified and as directed.

S&F in repairs of Thermostat 35® C to 75® C of ISI marked complete all as specified and as directed.

S&F in repairs of Indicating lamp (LED ) red or green any shape and size matching to existing geyser complete all as specified and as directed.

S&F in repairs of Heating Element required size and shape, 2000 watt ISI marked,suitable to 25/35/50 litre water heater complete all as specified and as directed.

S&F in repair gasket packing set suitable for 25/35/50 liter water heater complete all as specified and as directed.

S&F in repairs of glass wool superior quality for geyser including removing inner tank and refixing properly complete all as specified and as directed.

M&L in repairs Earthing complete with galvanished earth plate electrode of size 600 x 600 x 6.00 mm buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and galvanised iron or steel including earth work in any type of soil, GI funnel with GI mesh charcoal salt 15cm alternate layer and around the earth plate as shown in electrical plate no 3 of SSR Part I 2010, 20 mm dia watering pipe medium grade 1.70 mtr long GI protection pipe light grade 15mm dia from earth pit to main board including necessary pit 1:3:6 of RCC 1:2:4 type B1 re-inforced with 6mm MS bars centre to centre, 10mm dia handle, complete all as specified and as directed.

Dismantling & disconnecting connection taking out old unserviceable items and checking the serviceability of different spares / components / parts of security light fittings (HPSV, HPMV, Metal Halide fittings etc, any wattage/capacity) of any description and in any position, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in position, cleaning acrylic/glass cover connecting to electric supply and its testing on installation etc and taking out the old existing LED street light fitting / security light fitting / Flood light fitting and electric connections by removing carbon ,cut cable connection and re connect after repair of any description and in any position from poles / walls / pillars etc. complete and U/S LED street light depositing in MES storeyard and collect any type street light and fixing all as directed by Engineer-in-Charge. complete all as specified and directed by Engineer-in-Charge.

NOTES FOR SCH `A’ ITEM NO 1:- (i) Fixing charges for Spare Parts of the new & old replaced part(s) is deemed to be included in the rates quoted by the contractor for above item and cost of new parts shall be measured and paid separately as supply only against respect items of Sch ‘A’. .

(ii) Necessary T&P i.e. ladder, tools,Vehicles etc required for checking and making the light fittings in serviceable conditions, its fixing in position and testing shall be arranged by the contractor at his own cost for checking and fixing of street light fittings/security light fittings of any description on poles / on walls / on pillars etc i.e. in any position at site.

(iii) Contractor’s quoted rates for Schedule `A' item No 1 is deemed to included for inspection/checking the serviceability of the fittings in position or by taking down as per site requirement, removing the damaged unserviceable / broken parts, fixing the new parts as required, fixing the fittings in same position or the other, connecting the fittings with electric source and testing of fittings as directed.

(iv) The acredit rep of Contractor shall daily report to JE E/M and receive the complaints and job card of U/S street lights on each working day and details his electirician for repair/rectification and make the street lights in serciceable condition.

Supply only in replacement of old U/S eixting following parts for HPSV/ LED light fittings:-

Supply only HPSV Tubular Clear Lamp (SON LUX-T),70 SON-T Watts

Supply only HPSV Tubular Clear Lamp (SON LUX-T),150 SON-T Watts

Supply only HPSV Tubular Clear Lamp (SON LUX-T),250 SON-T Watts.

Supply only HPSV Lamp (SON LUX-T),400 SON-T Watts.

Supply only Ballast (Choke) , 70 Watts,SON/MH open construction heavy duty VPIT copper wound.

Supply only Ballast (Choke) for HPSV fittings, 150 Watts,SON/MH open construction heavy duty VPIT copper wound.

Supply only Choke for HPSV fittings, 250 Watts,SV/MH Sleek open construction heavy duty VPIT copper wound.

Supply only Choke for HPSV fittings, 400 Watts,SV/MH Sleek open construction heavy duty VPIT copper wound.

Supply only Electronic igniter suitable for 70/150/250/400W HPSV/Metal Halide fittings.

Supply only porcelain holder’s screw or pin type for 70 Watt fittings for any type and any description as directed by Engineer-in-Charge.

Supply only porcelain holders screw or pin type for 150/250/400 Watt fittings for any type and any description as directed.

Supply only LED S/L Driver 45 W of existing make.

Supply only LED S/L Driver 60 W of existing make.

Supply only LED S/L Driver 90/100 W of existing make.

Supply only MH DE TUBE LAMP-70W

Supply only MH DE TUBE LAMP-150

Supply only MH SINGLE ENDED CLEAR TUBULAR LAMP-70W

Supply only MH SINGLE ENDED CLEAR TUBULAR LAMP-150W

Supply only MH SINGLE ENDED CLEAR TUBULAR LAMP-250W

Supply only MH SINGLE ENDED CLEAR TUBULAR LAMP-400W

S&F in repair energy saving, IP66 environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source,.120 W suitable for highlighting architectural facade high mast and general purpose lighting . including cable 1. sqmm 3 core copper conductor and PVC conduit pipe 15 mm bore heavy duty ISI marked duly claimed with pole at 2 place complete all as specified and directed from light fitting to over head line.

S&F in replacement of old U/S eixting Light Fitting and new Energy saving, environmental friendly, long life , Exclusive innovative die -cast aluminium IP65 street light luminaire with high power LED as light source 90 W LED 6000K with1 sqmm 3 core copper conductor cable and PVC conduit pipe 15 mm bore heavy duty ISI marked duly claiped with pole at 2 place from light fitting to over head line in replacement with existing HPSV /MH light fittings of wattage any type any description make all specified and directed by Engineer-in-Charge.

S&F in repair New generation energy saving and environmental friendly long life LED Street Light made up of pressor die cast aluminium housing with high power LED as 60W lighting source and lens embedded PC cover having Top opening separate driver compartment with IP 66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device.60W LED including cable 1.5 sqmm 3 core copper conductor and PVC conduit pipe 15 mm bore heavy duty ISI marked duly claiped with pole at 2 place complete all as specified and directed from light fitting to over head line.

S&F in repair new Automatic street light Control Switch with INFRARED SENSOR based NATURE switch & voltage monitoring System (VMS) on light iux ievel.suitable power Contactor,MCB and support Termite should be enclosed in pole/wall mountable enclosure made of Rust proof, Electric shock proof, Termite proof and Termite proof and FR grade special moulding compound (Sintex make SMC junction box ) conforming to IP54. The contactors, MCBs and circuit wiring should suitable enough to take load of 25 kw equally distribution over three phase 415 Volts A/C.

S&F in repair new generation, Post-top energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as Light source, 20W,RUBY (CLEAR)- IP 65 protection including cable 1.5 sqmm 3 core copper conductor and PVC conduit pipe 15 mm bore heavy duty ISI marked, complete all as specified and directed.

S&F in repair, MCB TPN, 63 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supply, fixing in repair MCCB 125 Amps , 4 pole, 415 volt AC supply, having breaking capacity 16 KA and with adjustable load setting including sheet metal enclosure for MCCB Complete all as specified and directed.

S&F in repair new PVC insulated sheathed stranded Aluminium conductor cable twin core 4 Sqmm size for connecting from Over head conductor to street light fittings with connector etc complete all as specified and directed.

Supplying & fixing in repair new PVC insulated sheathed stranded Aluminium conductor cable twin core 6 Sqmm size for connecting from Over head conductor to street light fittings with connector etc complete all as specified and directed.

Disconnecting and taking out existing MS boxes of any description and in any position on poles or fixed in the plinth of poles and supplying and fixing in position new PVC (Synthetic ) boxes of size 280mm X 170mm X 115mm depth, made out with Synthetic. The box shall be provided with and including 10 cm long aluminium bus bar of size 20x3 mm size 2 Nos mounted on porcelain insulators including one No. MCB SP of ‘C’ series, 5/6 Amps of Make Legrand/L&T/ Siemens and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminium lugs etc fixed on pole using 30x5 mm FI clamps, nuts, bolts & washers etc complete all as specified and directed by Engineer-in-Charge. Note :- The contractors quoted rates for the above items are deemed to include for fixing the Synthetic box in position with suitable MS clamps and/or necessary PCC as per site requirement.

Disconnecting, taking out and removing old existing unserviceable underground, LT cable of any description and in any position 10 Sqmm to 70 Sqmm of 2/3.5 core complete including taking down unserviceable protection pipe etc all as specified and directed by the Engineer-in-Charge .

Supplying ,Laying, jointing and testing XLPE insulated, armoured, heavy duty, aluminium conductor cable 25 Sqmm 2 core 1100 volts grade, laid in trenches/ducts, floors, fixed to pole/ walls etc. including taking down complete all as specified and directed by the Engineer-in-charge.

All as per ser item No. 146.00 above but 16 Sqmm 2 core.

All as per ser item No. 146.00 above but 10 Sqmm 2 core.

All as per ser item No. 146.00 above but 50 Sqmm 3.5 core.

Disconnecting & Taking out old unserviceable joints and Supplying, Fixing, jointing and testing for provision of straight through joints, epoxy type with epoxy jointing materials, suitable for XLPE, LT Cable, 1100 Volts grade, for 10 Sqmm to 16 Sqmm any core the following sizes of cables all as specified and directed.

All as per serial item No. 150.00 above but 25 Sqmm to 35 Sqmm 3½ core

All as per serial item No. 150.00 above but 50 Sqmm to 70 Sqmm 3½ core

Disconnecting existing LT over heated or burnt cable terminal Joint for LT aluminium conductor cable of size 10 to 25 Sqmm of any core at existing panel/ board/feeder pillar box /overhead lines etc., cutting out over heated / burnt / unserviceable end portion of cable, stretching / opening cable to suitable required length from available rings etc and fixing and connecting the cable in position properly by providing suitable new aluminium lugs and suitable GI nuts, bolts & washers etc complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre deep and not exceeding 1.5 metre width and getting out including forming bottom surface to required slope/gradient for laying cables/protection pipes etc complete all as specified and directed by Engineer-in-Charge including removing cable covers carefully & stacking properly for re-use all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers of 25 cm thick after the cables etc. are laid, jointed & tested complete all as specified and directed.

Removal of surplus excavated spoil not exceeding 50 metre distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 metre above the starting point complete all as specified.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. Note:-Punned thickness shall be measurement & paid.

Supplying & Laying Sub Class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection all as specified and directed by Engineer-in-Charge.

M&L for surface excavation over the areas around the poles/feeder piller boxes/ sub stations not exceeding 15mm depth including cleaning the bushes and vegetation and levelling incl removal of surplus soil in soft/hard dense soil.

Trimming/cutting of all trees branches and cleaning of buses upto 3.0 mtr distance both side from nearest conductor/Earth Wire at LT overhead line including cleaning of site and depositing of material upto 250 mtr distance all as directed at site by Engineer-in-Charge

Supply, fixing, connecting & testing and replacement of sheet metal enclosures SPN 4 way DBs for using MCBs / MCB isolators without bus bar with and including one MCB SPN 16 Amp complete all as specified & directed.

Supply, fixing, connecting & testing and replacement of sheet metal enclosures SPN 2 way DBs for using MCBs / MCB isolators without bus bar with and including one MCB SPN 16 Amp complete all as specified & directed.

S&F MCB single pole & Neutral 63 Amps, 10 KA ,240 Volts complete all as specified.

S&F MCB single pole 6 to 32 Amps, 10 KA , 240 Volts complete all as specified.

Supply and erecting steel tubular swaged pole (410 SP-31) 09 mtr long, complete with cast iron base plate, pole cap/final taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in sub base foundation etc complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregates) for coping of poles with all necessary form work complete all as specified and directed.

Dismantling & disconnecting connection taking out old unserviceable items and checking the serviceability of different spares / components / parts of High mast light fittings (HPSV, HPMV, Metal Halide fittings etc, any wattage/capacity) of any description and in any position, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in position, cleaning acrylic/glass cover connecting to electric supply and its testing on installation etc complete all as specified and directed by Engineer-in-Charge.

M & L in repairs Earthing complete with galvanished earth plate electrode of size 600 x 600 x 6.00 mm buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth strip 25 x 4mm as earthing lead by means of bolts, nuts, check nuts and galvanised iron or steel including earth work in any type of soil,PCC work in 1:3:6 pit and RCC 1:2:4 type B-1 pit cover reinforced with 6 mm dia ms bar 75 mm c/c 10 mm dia handle, charcoal salt 15cm alternate layer and around the earth plate as shown in electrical plate no 3 of SSR Part I 2010, 20 mm dia watering pipe medium grade 1.70 mtr long GI protection pipe light grade 15mm dia from earth pit to main board including necessary pit cover complete all as specified and as directed.

S&F in 10 W Rechargeable torch with side light with long range and high brightnes.

S&F in 3 W Rechargeable head torch with flexible headband and adjustable neck for better direction to light .

S&F in street light bracket 32 to 40 mm GI pipe light wait(60 x1.2 M )long and as per size at site all as specifide and directed.

M/s Mahesh Engineering Works (BID ID -3440467)

Allied Agencies (BID ID -3440528)

AUTOMATION AND SWITCHGEAR PANELS (BID ID -3445892)