Renovation of Kitchen of Community hall and Repainting all the buildings at Fisheries complex, Mahe.

Amount

Code No. 4.8.1:- Providing and fixing upto floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Code No. 6.38:-Providing and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in super structure above plinth level upto floor V level in cement mortar 1:4 (1 cement: 4 coarse sand) The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work.

Code No. 8.2.2.1:- Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. - Granite of any colour and shade - Area of slab upto 0.5 sqm

Code No. 9.1.2I:-Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position - Irul wood

Code No. 9.5.1.1I:-Providing and fixing panelled or panelled and glazed shutters for doors , windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding panelling whichwill be paid for separately. - Irul wood35mm thick shutters

Code No. 9.7.1I:- Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick: Irul wood

Code No. 9.96.1:-Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc.complete: 300x16mm

Code No. 9.97.4:- Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : - 150x10mm

Code No. 9.100.1:-Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-125mm

Code No. 11.37:-Providing and laying ceramic glazed floor tiles 300X300mm (thickness to be specified by the manufacture) of 1st quality conforming to IS : 15622 of approved make (Bell / Johnson / Regency / Somany / Naveen / Asian ) in colours such as white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4(1 cement : 4 Coarse sand)including pointing the joints with white cement and matching pigment etc., complete

Code No. 11.36A:-Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson/Asian / Somany / Nitco) in all colours, shades of size 200 x 300 mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointing in white cement mixed with pigment of matching shade complete. size 200x300mm

Code No. 14.53.1:-Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade - One or more coats on old work.

Code No. 14.54.1:-Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

Code No. 14.66.2:- Finishing walls with Acrylic Smooth exterior paint of required shade - Old work (One or more coat applied @ 0.90 lts/10 sqm.

Code No. 15.13.1:-Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50m lead - Of area 3 sq.metre and below.

C. SATHYANATHAN