8123/SAR-64/2023-24 REPAIR TO ROOF SLAB, CHHAJA, EFFLORESCENCE, FALSE CEILING,

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work for decorated/designer ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre or as per site requirement complete all as specified and directed.

M&L for Designer and decorative false ceiling Gypsum Board 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. wire mesh (Metal frame work and G.I. wire mesh paid separately) ceiling fixed with screw as per manufacturers instructions, metal frame work and false ceiling work for upper/ lower designer and decorative false ceiling and any sunk or raised moulding and cutting/jointing/locking and misc connected items for lights and other items complete etc. incl acrylic two coat of OBD on newly untreated surface over 2mm thickplaster of paris putty with preperation of surface complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) all as specified.

Supply only integral liquid water proofing compound (ISI marked). Make : Pidilite (Dr. Fixit Pidiproof LW) or equivalent of Fosroc / Sika / STP

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for complete removal of existing treatment on walls/ceilings complete all as specified and directed by Engr-in -Charge.

M&L for preparation of existing/ new surfaces of wall and ceiling applying plaster of paris putty of 2mm thickness over existing/newly surfaces to prapare the surface even and smooth.

M&L for Smart painting of existing even and smooth surfaces two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over and including priming coat of internal primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed as per manufacturer's specification complete all as specified and directed Note: Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Make - Asian Paints Royal (5 years product warranty) or Nerolac (5 years product warranty)/ Asian Paints Royal (5 years product warranty)/ Berger (5 years product warranty)

Material & Labour for Smart painting of existing even and smooth surfaces applying Two coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed Make - Asian Paints Royal (5 years product warranty) or Nerolac (5 years product warranty)/ Asian Paints Royal (5 years product warranty)/ Berger (5 years product warranty)

Dismantling Wall penelling boards (PVC penelling incl fillet, fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specifiedand directed

M&L for Solid PVC Wall Lining/Wall penelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

Demolition Mud in roofs, any thicknes,any material including plastering ,brick bats, existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge.

M&L for providing cement concrete in type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to (consolidated thickness 65mm or less) as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engr-in-Charge.

M&L screed laid 15mm thick in CM 1:4 as in roof over green concrete surface finished even and smooth using Lequid WPC complete all as specified. Note :-Lequid WPC will be measured and paid seperately)

M&L for roof treatment using APP based polymeric membrane minimum weighing not less than 3kg/sqm black finish reinforced with non woven polyster matt with thermo finish (wt. not less than 150 gms/sqm) laid over compatible bitumen primer @0 .30 liters per sqm and bitumen 85/25 @ 1.20 Kg per Sqm with help of torching with a proplyne or a butane gas using torch with minimum overlap of 75mm at side and 100mm at ends and sealing including applying a coat of bitumen primer & bitumen 85/25 applied hot all as per manufacturer instructuions. For parapet in a groove (No separate payment will be made and measurement will be done for horizontal surfaces) including applying a coat of heat repallant bitumen aluminium paint @ 0 .1 liter per Sqm on topof treated surface of roof complete all as specified and directed.

Dismantling Asbestos sheet, Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

M&L Pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 Complete all as specified

M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces.

Dismentling floor , hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises

M&L for marble shade Virified Ceramic tiles double charge/ Ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for marble shade ceramic tiles double charge/ Ultracharged 10 mm thick (square/ rectangular) polished, in vertical surface area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge.

M&L for 18/19mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM 1:6 complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) , kerb stone & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:4:8 type D -2 using 40 mm graded stone aggregate as in sub base complete all as specified& directed by Engr-in-Charge.

M&L for Providing and laying prepolished cement concrete Chequered tiles 30cmx30cmx25mm thick, with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape heavy duty , set,jointed and pointed in neat cement slurry in floors over screed bed 15mm thick 1:6 cement mortar complete all as specified& directed by Engr-in-Charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand compelete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

S& F in repair 10mm thick froasted Toughned glass as in hinged doors, bathroom partitions automatic doors and similar work including cuttings to shape , drilling holes required and grinding, polishing and rounding off edges of glass, satin finish, any type, drilling holes in glass any sizes, incluning necessary accessories silicon, beading,magnet seal, wiper seal, stainless steel L-connector , glass to glass connector , cutout etc complete all as specified and directed

S&F in repair 25mm dia and thickness 14 gauge Stainless steel (SS 304) pipe/Rod with wall/ glass connector/bracket including fixing in glass and wall complete all as specified and directed.

S&F in repair SS 304 Glass to Glass 135° Shower Hinges - Satin Stainless Steel complete all as specified and directed. Note : Centrally positioned pivot line Can be used for double action doors also Secure holding with glass With gaskets to prevent glass damage Door width should not exceed 800 mm Door weight should not exceed 40 Kg Fittings are to be tightened to the specified torque in all occasions (4 Nm)

S&F in repair Brass Grab Bar Concealed (24 inches) and minimum weight 1kg complete all as specified and directed. Note : (i) Grab Bars are manufactured in heavy duty Brass Chrome Plated that gives a glossy finish (ii) Anti-Corrosive and Rust-Proof material

S&F in repairs Single Piece WC with UF soft close seat cover, hinges, fixing Accessories, vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. Make : “ Kubix cat part No. KUS-WHT-35851S300UF” of Jaquar or equivalent of M/S Roca, M/s CERA, M/s Madhusudan Ceramic as approved by GE.

S&F in repair bathroom vanity Cabinet with washbasin (Wash hand Basin) , marble shade HDHMR Board (water resistant, termite proof, fungal resistant and becteria resistant) included 1 vanity Cabinet, 1 washbasin, 1 led mirror and all hardware , the faucet, Pop-up drain and fittings Accessories set Cabinet ,Dimensions 32L X 20W X 18H inches , Venity Cabinet 31L X 17W X x 18H , Washbasin 32L X 20W X 8H inches , Mirror - 32L X 20H, number of doors 2 Nos , number of drawers 1 Nos , number of piece 3 Nos , base type ceramic tiles , back material type engineered wood with installation of wall mounting complete all as specified and as directed by Engr-in-Charge.

S&F in repair Stainless steel(SS 304 grade ) bathroom shower panel Thermoplastic with child safty Lock Tower system, Rainfall Shower, waterfall, body Massage Spray, SS hand Shower with SS 150CM connecting pipe, Hanging Clip 2 Nos, Anti fringprint stainless steel,inbuilt ABS top shower with 60 nozzles, 2 Moveable ABS body Massage Jets , Brass spout , Embedded Shampoo rack , Five Way water flow, Thermoplastic mixer , shower panel Size 1600mm X 200mm,40cm ss braided hose, cascade shower sliver colour matt finish, corrosion resistant including fittings accessories etc complete Make : JPL -SSF-ST88158B of of Jaquar or equivalent of M/S Roca, M/s CERA, M/s Madhusudan Ceramic as approved by GE.

S&F in repairs CI sand pipe 100 mm bore fixed to walls or laid in floors complete including jointing all as specified.

S&F CI bend for 100mm pipe including jointing complete all as specified.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F 20mm GI tubing Medium grade fix to wall/floor fixed complete all as specified.

S&F 32mm dia waste fitting (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange complete for the following sizes all as directed by Engr-in-charge

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge.

S&F in repair Brass chromium plated (Stainless Steel SS 304) towel rack 24 " long, without lower Hangers but with 5 hooks fixed in position with steel screws complete all as specified.

Supply and fixing in repairs MS grating CP 100mm dia, with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.

S&F in repair wash hand basin single lever Tall Boy with 155mm Extension body fixed spout without popup Waste system with 600 long braided hoses pipe etc fixed 15mm bore pipe complete all as specified. Make : “ Kubix cat part No. KUP-35005BPM” of Jaquar or equivalent of M/S Roca, M/s CERA, M/s Madhusudan Ceramic as approved by GE.

S&F in repair bib cock with wall flange cast copper alloy with crutch or butter fly handle 15mm bore chromium plated fixed Make : “ Kubix cat part No. ORP-10037PM” of Jaquar or equivalent of M/S Roca, M/s CERA, M/s Madhusudan Ceramic as approved by GE.

S&F in repair Angluar Stop cock with wall flange , cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions suitable for 15 mm bore tubes, complete all as specified Make : “ LYR-38053” of Jaquar or equivalent of M/S Roca, M/s CERA, M/s Madhusudan Ceramic as approved by GE.

S&F in repair chromium plated Brass health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.as approved by the GE.

S&F in repair brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repairs 600mm long and 100mm wide glass shelf rectangular type complete all as specified & as directed. Make : “AKP-35771P” of Jaquar or equivalent of M/S Roca, M/s CERA, M/s Madhusudan Ceramic as approved by GE.

S&F in repairs Towel Ring Square with Round Flange complete all as specified & as directed. Make : “ACN-1121N” of Jaquar or equivalent of M/S Roca, M/s CERA, M/s Madhusudan Ceramic as approved by GE.

S&F in repairs Soap dispenser with Glass bottle complete all as specified & as directed. Make : “ACN-1135N” of Jaquar or equivalent of M/S Roca, M/s CERA, M/s Madhusudan Ceramic as approved by GE.

S&F in repairs Toilet Roll Holder with stainless steel flap complete all as specified & as directed. Make : “ACN-1153S” of Jaquar or equivalent of M/S Roca, M/s CERA, M/s Madhusudan Ceramic as approved by GE.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame) n exc 1.5 sq.each.

S&F anodized aluminium frame with power coating (minimum thickness 50 micron) and other sections for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

Supply only 5mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane all as specified and directed by Engr-in-Charge

Supply only 5mm thick froasted glass in squares n exc 0.5 sq. m each pane all as specified and directed by Engr-in-Charge

S&F anodized aluminium grill with power coating (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement & directed by Engr-in-Charge.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed by Engr-in-Charge.

M&L Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made with particle board Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws all as specified.

S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed

S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked.

S&F 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified.

S&F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

Taking down carefully copper / aluminium point wiring light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, bell push bell buzzer lamp holder bracket etc. removing from site and making good disturbed surface of wall, floor etc complete all as specified and as directed.

M & L for replacement of concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled sunken boxes modular type including earth dolly with cover plate with frame in case of modular type of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :- One light / fan point controlled by one way switch

One 5 Amp socket outlet on independent board.

One 5 Amp socket outlet on same board.

All as per above item No-2 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed.

S&F in replacement socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and directed.

S&F in replacement switch 6 amps modular type one one way complete all as directed.

S&F in replacement of ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote controle complete all as specified and as directed by Engr-in-Charge. Note- Model and Design Shall be finalize by the dept

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 900 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote controle complete all as specified and as directed by Engr-in-Charge. Note- Model and Design Shall be finalize by the dept

Supply & fix wall mounting fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and as directed by Engr-in-Charge. Make- Orient/Crompton/Bajaj

Supply and fixing modular type AC box operated with 20 Amp single pole MCB including 15 amp modular socket complete all as specified and directed by the Engr-in-charge. Make : - Legrand, Havells, Indo asian

S&F LED energy efficient 3 watt flexible desk mounted reading lamp with brightness controle button with operating frequency 50 Hz , 230 Volts, warm white with fixing arrangement such as modular box sheet plate frame screw etc complete all as specified and directed.Make- Legrand Cat No 6773 16.

S&F in replacement of enviroment friendly indoor decorative 9/10 Watt LED Aluminium Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessaries all as specified and directed.

S&F in replacement of recesses mounted made of aluminium PDC round shape slim downlighter of 15 watt capacity with colour temperature 4000 K , Lumens 780, CRI more than 80 including all accessore complete all as specified and directed.

S&F in replacement of old unserviceable decorative type wall mounted with new wall comet light fitting with LED bulb pin type B22 cap 4000 K complete all as specified and directed. Make- Philips 30575 or equivalent

Supply and install hi wall split Type Airconditioner with indoor & outdoor unit complete with Inverter Technology, 3D Airflow, power chill operation,cordless remote control unit and with in built air ioniser, PM 2.5 Filter for better indoor air quality with 5 star rating and EER 3.2 of capacity 2.0 TR with precharged CFC free refrigerant with hot and cold function all as specified and directed by Engr-in-Charge. Make - Voltas, Bluestar, Hitachi

Supply and fix Voltage stabilizer ISI Marked automatic operation, single phase naturally air cooled indoor type & designed for input variation between 160 V to 260 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed. Make- Volina, V-Guard, Microtek

Taking down light fittings of any type any size any location complete all as specifed and directed.

G.H. INFRASTRUCTURE PRIVATE LIMITED

SINGH CONSTRUCTION CO.