Loading
Loading…
Loading…
Tender Value
₹69.8 L
EMD Value
₹1.4 L
Closing Date
5 Oct 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar Nature of Work: Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements. earthing etc (with or without supply of items/equipment's) for 230 Volts, 1 phase or 415V, 3 phase system or higher voltages.
27 conditions · 3 needing a document upload
Uploading of Scanned copy of Statement of Bank details, PAN & GST.
Compliance with Public Procurement (Preference to Make inIndia) Policy: This tender complies with Public Procurement(Preference to Make in India), Order 2017-Revision dated19.07.2024 of Department of Promotion of Industry and InternalTrade, Ministry of Commerce and Industry, Govt. of India (hereinreferred to as PP-PIM), circulated vide Ministry of Railways(Railway Board)'s letter No.2020/RS(G)/779/2/Pt.1 (E3322671)dated 20.08.2024, and all its amendments. Only Class-I localsuppliers (as defined in PP-PIM) shall be eligible to bid for list ofitems specified in Ministry of Railways (Railway Board)'s letterno.2025/RS(G)/779/3 (E3488356) dated 02.05.2025. For otheritems, only Class-I and Class-II local suppliers are eligible to bid.At the time of bidding, each bidder is required to indicatepercentage of local content (as defined in PP- PIM) and provideself-certification that the item offered meets the local contentrequirement for "Class-I local supplier"/"Class-II local supplier",as the case may be. If this self-certification is not submitted, thebid will be summarily rejected. For contracts above Rs.10 crores,the provisions of Para 9(c) of PP-PIM shall be additionallyapplicable. For the purposes of this NIT, the "local content" (asdefined in PP-PIM) requirement to categorize a supplier as"Class-I local supplier" is minimum 50% and for "Class-II localsupplier" is minimum 20%. Also, the Margin of PurchasePreference (as defined in PP-PIM) is 20%. The procedure forpreference to Make in India shall be as specified in PP-PIM.Uploading of self-certificate for meeting the local contentrequirement for "Class-I local supplier"/"Class-II local supplier",as the case may be (proforma attached). Non- submission of thiscertificate will lead to summary rejection of bid. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1) Provision of two lifts each at PANP, JRU, BYD and NTW railway stations on the existing FOB (Total 8 lifts). 2) Provision of one lift each at PF-1 and PF-2 on existing FOB at AJP and one lift on main entry to railway station at DRU (Total-3 lifts).
Y-E-29-2026-27-90~SWR
Y-E-29-2026-27-90
Open
Works - General
180 Days
Dharwad, Karnataka
₹0
₹1.4 L
10 Sept 2026
10 Sept 2026
21 Sept 2026
82 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 48,17,461.8 | ||
| — | 8.00 | — | — | ||
| Supply, fixing and commissioning of VFP 4 Way Double Door Distribution Board with following switch gears (All 'C' Series) FP 63A RCCB having sensitivity 300 mA 10KA Short circuit capacity-1 Nos, FP MCB 63 A-1 Nos, SP MCB 16A-2 Nos, SP MCB 6 A-1 No. with required suitable hardware and internal wiring complete. | — | — | — | 1,58,544.48 | |
| — | 400.00 | — | — | ||
| Platform surface/concrete cutting for excavation of cable trench 300 mm wide x 300 deep, re-fitting of tails / soils / re-plastering of excavated trench with cement to bring back to its original shape. | — | — | — | 2,99,196 | |
| — | 880.00 | — | — | ||
| Laying of 4 x 16- 35 Sq mm LTUG cable with aluminum conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 12,170.4 | |
| — | 160.00 | — | — | ||
| Supply of LTUG Cable with Alu conductor, XLPE insulated and armored, 4 x 120 sqmm as per IS-7098. | — | — | — | 1,18,147.2 | |
| — | 2490.00 | — | — | ||
| Laying of 4 x 50-240 Sq mm LTUG cable with aluminum conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 55,626.6 | |
| — | 1600.00 | — | — | ||
| Supply of HDPE pipe of dia 110 mm grade PE-100 with pressure of PN 8 for safety of cables. | — | — | — | 6,43,200 | |
| — | 1600.00 | — | — | ||
| Laying of HDPE Pipe of dia 110 mm grade PE-100 with pressure of PN 6 for safety of cables and all the ends should be sealing with bituminous compound. | — | — | — | 34,048 | |
| — | 960.00 | — | — | ||
| Supply, fixing and commissioning of DLP-S-U- PVC trunking of size 100X 50 mm including accessories like bends, elbows, junction box etc. similar to M/s LEGRAND cat No. 638038. | — | — | — | 9,20,928 | |
| — | 192.00 | — | — | ||
| Supply and Fixing of GI pipe of dia 50 mm, 'B' class, for cable rising & protection including clamping, fixing arrangements and sealing with bituminous compound. | — | — | — | 1,55,137.92 | |
| — | 16.00 | — | — | ||
| L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtr length, soil treatment by spreading of 25 kgs each of salt and charcoal, duly painting earth pit with black paint and stenciling of earth resistance value with date. | — | — | — | 92,542.4 | |
| — | 600.00 | — | — | ||
| supply and laying of 25X5mm G.I. strip including connection/terminating with all accessories like saddles, clamps, G.I nut, bolt, spring, washer etc as required to provide earth continuity from earth pit to lift well. | — | — | — | 1,02,780 | |
| — | 800.00 | — | — | ||
| Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated hot dipped galvanized iron cable tray (galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts, etc. as required. | — | — | — | 6,37,552 | |
| — | 8.00 | — | — | ||
| Supply, assembly, fixing and commissioning of 3 Phase 4 wire Bus bar Chamber - 100 Amps capacity 4 Way Similar to M/s. Havells, SAP Code-IHBC006304 or similar specifications. | — | — | — | 61,575.84 | |
| — | 8.00 | — | — | ||
| Additions/alterations of interconnectivity of power supply, LTUG cable for outgoing feeders at PF LT panel board, fixing and mounting work etc., {The tenderer shall be consult and obtain permission with Rly., Engineers before commencement of work each step/occasion}. | — | — | — | 17,390 | |
| — | 800.00 | — | — | ||
| Wiring for circuit/ submain wiring along with earth wire 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface /concealed medium class PVC conduit as required as per CPWD Standard. | — | — | — | 1,70,192 | |
| — | 80.00 | — | — | ||
| Supply, fixing, testing and commissioning of 20 - 22 watt 6500k LED lighting fixture 4 feet length as per specification SWR/LED LIGHT FITTING (Indoor/outdoor) /001-2016 effective from 18.04.2016 or latest. | — | — | — | 18,556 | |
| — | 192.00 | — | — | ||
| Design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. (Approximate size of the board is 2 feet x 2 feet). | — | — | — | 3,70,986.24 | |
| — | 192.00 | — | — | ||
| Erection, installation, testing and commissioning of wall / hanging / floor mounting type LED illuminated sign / direction boards, of the above schedule signage boards with all required hardware accessories complete for installation as per site condition complete. | — | — | — | 37,180.8 | |
| — | 4.00 | — | — | ||
| Design, supply and Provision of LT panels indoor type made out of 16 SWG CRCA sheet steel, vermin and dust proof Siemens gray powder coated paint, free floor standing with MS Channel, suitable concrete foundation to be made as per requirement, with cable alleys, locking arrangements, suitable copper bus bars & all accessories as per specification comprising of Incomer: 250A FP Adjustable thermal and fixed magnetic setting MCCB 35 KA-1 Nos Outgoing : 100 A FP Adjustable thermal and fixed magnetic setting MCCB 25 KA - 6 Nos, 32 FP MCB - 04 Nos, Digital Multifunction meter with RS 485- 1 Nos at incoming, RYB indication lamp (LED type) Set, including all heat shrinkable sleeves, flexible Cu wires, lugs, sleeves, terminals & PVC troughs as per site condition. Drawing approval should be obtained before fabrication of the panel board. | — | — | — | 9,11,707.92 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril-2022.pdf
ATTACHMENT
JPOintenderdocumnets.pdf
ATTACHMENT
AdvanceCorrectionSlips1-11toGCC-2022.pdf
ATTACHMENT
AdvanceCorrectionSlips12toGCC-2022_compressed.pdf
ATTACHMENT
TB-ProvisionofLiftsatNTWPANPJRUAJPBYDDRUtotal11nos_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .