Construction of Additional Accomodation 06 Rooms for Upgradation of Govt Middle School Badansoo Zone Chenani Distt Udhampur (2nd call)

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth , 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 1 mtr from cutting edge , disposed earth to be levelled and neatly dressed in 80% all kind of soil and 20% ordinary rock (including all carriages lead and lift if any)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: 80 %All kinds of soils and 20% ordinary rock (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 4 : 8)1 cement 4 coasre sand 8 stone aggregate grade , with 40mm nominal size . crushed (including all carriages lead and lift if any)

Providing and laying Cement Concrete 1:5:10 (1 ce- ment: 5 coarse sand : 10 graded brick aggregate 40 mm nominal size) in retaining wall/return wall, col- umns etc. excluding cost of centering and shuttering , all work upto floor V level (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 3 : 6 ) with 20% boulders cement 3 coasre sand 6 stone aggregate grade , with 20mm nominal size . crushed (including all carriages lead and lift if any)

Providing and laying in position reinforeced cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 1.5 : 3)1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed (including all carriages lead and lift if any)

Reinforced cement concrete work in wall (any thickness) including attached pilasters 'buttresses'plinth and string courses'fillet ,column pillar'piers ,abutment 'post and sturts etc upto floor five level excluding the cost of centering and shuttering ,finishing and reinforement ( 1 : 1.5 : 3 )1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed (including all carriages lead and lift if any)

Reinforcement of RCC work in plinth band incl straightening, cutting, bending , placing in position and binding incl.all carriages complete. (including all carriages lead and lift if any)

Brick work with common burnt clay F.P.S (Non-modular) brick of class designation 75 in foundation and plinth in 1:6 (1 cement : 6 coarse sand) (including all carriages lead and lift if any)

Extra for brick work in Super structure above plinth level upto floor V level (By manual means) (including all carriages lead and lift if any)

Centering and shittering including strutting propping etc and removal of form work Foundation footing bases of columns etc (including all carriages lead and lift if any)

Centering and shuttering incl. struting, proping ,etc.and removal of form work for; lintel beam ,plinth beam ,girders,bressumers and cantilevers (including all carriages lead and lift if any)

Centering and shuttering incl. struting, proping ,etc.and removal of form work for;columns,pillars,piers,abutments, posts and struts (including all carriages lead and lift if any)

Centering and shuttering incl. struting, proping ,etc.and removal of form work for edges of slab under 20 cm (including all carriages lead and lift if any)

Centering and shuttering incl. struting, proping ,etc.and removal of form work for suspended floors,roofing ,landings,balconies and access platform (including all carriages lead and lift if any)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement 6fine sand ) (including all carriages lead and lift if any)

12 mm cement plaster 0n wall of mix 1:6 ( 1 cement 6 fine sand ) (including all carriages lead and lift if any)

6mm thick plaster of mix 1:3 (1 cement : 3 fine sand) (including all carriages lead and lift if any)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and ixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash asteners shall be paid for separately): 2nd Class (including all carriages lead and lift if any)

Providing 40x5 mm flat iron hold fast 40 em long including fixing to frame with 1 Omm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) (including all carriages lead and lift if any)

Providing and fixing paneled or glazed shutters for doors and windows and clestory windows using 10 kg /sqm (4mm thick) float glass panes including ISI marked black enameled M.S. butt hinges bright finished of requried size with necessary screws, ( 35mm thick of 2nd class deodar wood). (including all carriages lead and lift if any)

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. .63 mm for doors, windows and clerestory windows with hinges and necessary screws : Second class deodar wood. (including all carriages lead and lift if any)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood (including all carriages lead and lift if any)

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick (including all carriages lead and lift if any)

Cement concrete flooring in (1:2:4) 1 cement : 2 coarse sand : 4 stone aggregate finishing with a floating coat of neat cement including cement slurry but exd. The cost of nosing of step etc. complete 50mm thick with 20 mm nominal size stone aggregates (crushed) (including all carriages lead and lift if any)

Providing fixing and glass strips in joints ot terrazo/cement concrete floor 40 mmwide x 4mm thick (including all carriages lead and lift if any)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm (including all carriages lead and lift if any)

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. (including all carriages lead and lift if any)

Steel work welded in built up section, trusses and framed works including cutting , hoising, fixing in position and applying a priming coat of approved steel primer incl all carriages complete (including all carriages lead and lift if any)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerin- Charge)0.50mm+/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade5-7 microns epoxy primer on both sides of the sheet and polyeter top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (including all carriages lead and lift if any)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+/- 5 %) total coated thickness(TCT), Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated Jor L hooks, bolts and nuts and GI:Seam bolts, and nuts,GI plain and bitumen washers complete: Ridges plain (500- 600mm) (including all carriages lead and lift if any)

Providing and fixing hard board celing sheet of approved quality with neccesary nails etc. complete 6mm thick including wooden corner moulding of triangle shape. as per requriment ( frame work paid separately (including all carriages lead and lift if any)

Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position second class kail wood (including all carriages lead and lift if any)

Applying priming coat with ready mixed pink or grey primer including acrylic putty of approved brand and manufactures on wood work (hard and soft wood) (including all carriages lead and lift if any)

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacturers in all shades (two or more coats) on new work (including all carriages lead and lift if any)

Providing and fixing plained eaves boarding 2nd class kail wood 250 x 32 mm (including all carriages lead and lift if any)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement primer (including all carriages lead and lift if any)

Finishing walls with water proofing cement paint of requried shade New work(one or more coat )applied @3.84 kg / 10sqm including cement primer coat completed (including all carriages lead and lift if any)

Making plinth protection 50mm thick with cement concrete ( 1 : 3 : 6) 1 cement : 3 Coarse sand: 6 stone aggregate) 20 mm nominal size f stone aggregate over 75 mm bed of dry brick ballast , 40 mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth. (including all carriages lead and lift if any)

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm (including all carriages lead and lift if any)

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 X 10 MM (including all carriages lead and lift if any)

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 200 X 10 MM (including all carriages lead and lift if any)

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 mm (including all carriages lead and lift if any)

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 125 mm (including all carriages lead and lift if any)

Providing and fixing Ms grill of reqd. patter in frame of window etc with M S flat ,square or round bars ,railing etc all complete fixed to opening/window frame with raw plugs,screw etc (including all carriages lead and lift if any)

Dry random rubble masonry with hard stone in foundation and plinth: Using nallah stone without bond stone (including all carriages lead and lift if any)

Electric wiring with 1.5 sqm coppper cable including 20mm dia 2 mm thick PVC pipe 5 amp with socket box connnection to the main pole completed as dircted by the site engineer incharge (including all carriages lead and lift if any)

Krishan Singh

SHAH NAWAZ WANI

CHUNNI LAL