8124/SAR-T-60/2024-25 REPAIR/ REPLACEMENT OF SANITARY FITTINGS, PLUMBING WORK, FLOORING /WALL TILING, PLASTERING WORK IN RESTRICTED AREA OF ARC SARSAWA UNDER GE (AF) SARSAWA

Amount

Disconnecting & dewatering of PVC/RCC overhead taks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity not exc 500 ltrs each including marking the date of cleaning with white paint and stencil all as required & directed. Note: Cleaning shall be done through wash out pipe by marking suitable arrangement to the outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where the wash out pipe are not existing. The dirt etc shall not be allowed to enter the water supply system.

All as per serial item No 1.00 here-in-above but exc 500 ltr and not exc 1000 ltrs capacity.

S&F in repairs CI spun pipe 75 mm bore fixed to walls or laid in floors complete including jointing all as specified.

S&F in repairs CI spun pipe 100 mm bore fixed to walls or laid in floors complete including jointing all as specified.

S&F in repairs Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 100mm bore CI pipe including jointing complete all as specified and directed .

S&F in repairs Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore CI pipe including jointing complete all as specified and directed .

S&F CI bend for 100mm pipe including jointing complete all as specified.

S&F CI bend for 75mm pipe including jointing complete all as specified.

Dismantling of old PVC (SWR) pipes any type & any size complete all as specified

S&F 110mm PVC pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including dismantling old u/s pipe complete all as specified

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore Medium grade fix to wall/floor fixed complete all as specified.

S&F in repairs 15/20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed , minimum weight - 210 gms of including taking down existing ball valves any type all as directed by Engr-in-Charge.

S&F as in repair vitreous china wash down water closet pan (Pedestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified.Make Jaguar/ Roca/Kohler/Prayag

S&F as in repair vitreous china squatting pan of orrisa pattern 'long pan' size 580mm white (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed.Make Jaguar/ Roca/Kohler/Prayag

S&F as in repair vitreous china wash down water closet pan One pices / Single Pices (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. Make : “Cardiff Range” of Parryware equivalent of Jaguar/ Roca/Kohler/M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Madhusudan Ceramic as approved by GE.

S&F in repairs vitreous china wash basin white, flat back, size 550x400mm including pillar tap brass CP 15mm bore with long screwed shanks and fly nuts waste coupling brass CP 32mm bore, flange end bedded in red lead cement and other end fixed and PVC connection 450mm long 15mm bore with 2 Nos nuts and washes CI brackets complete all as specified and directed..Make Jaguar/ Roca/Kohler/Prayag

S&F in repairs vitreous china wash basin white, flat back, size 380 x300mm including pillar tap brass CP 15mm bore with long screwed shanks and fly nuts waste coupling brass CP 32mm bore, flange end bedded in red lead cement and other end fixed and PVC connection 450mm long 15mm bore with 2 Nos nuts and washes CI brackets complete all as specified and directed..Make Jaguar/ Roca/Kohler/Prayag

S&F in repair 32mm dia waste fitting (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange complete for the following sizes all as directed by Engr-in-charge :-

S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC fixed in repairs, complete all as specified.

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 60m long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge.

Supply and replacement in repairs of spindles, phases of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed.

Supply and fixing in repairs MS grating CP 100mm dia, with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.

S&F in repairs fancy typer Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified Make Jaguar/ Roca/Kohler/Prayag

S&F in repairs fancy type center hole basin mixer without popup waste system but including plain waste 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed downhigh pressure, with long scrwed shanks & fly nuts scrwed for iron pipes of 15 mm bore complete all as specified & as directed. Make Jaguar/ Roca/Kohler/Prayag

S&F in repairs brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed. Make Jaguar/ Roca/Kohler/Prayag

S&F in repairs brass chromium plated shower rose 125mmx125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.Make Jaguar/ Roca/Kohler/Prayag

S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge. Make Jaguar/ Roca/Kohler

S&F bib tap standard of PTMT any colour 15mm bore high pressurescrewed for iron pipe fixed in repair(Min. wt 90 gms) complete. Make Jaguar/ Roca/Kohler/Prayag

S&F in repair Stop valves, 15mm bore cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed Make Jaguar/ Roca/Kohler/Prayag

S&F in repair fancy type angle valves, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed by Engr-in-Charge.

S&F in repair 20mm bore Stop valves, cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions fixed Make Jaguar/ Roca/Kohler/Prayag

S&F in repair vitreous half stall bowl urinal flat back,size of 465x355x265mm white(minimum),including waste coupling and waste pipe with grating ,Spreader with connection and union for discharge pipe all as specified .

S&F Stop valve of 15 mm dia PTMT any colour high pressure screwed for iron pipe and fixed in repair. Make Jaguar/ Roca/Kohler/Prayag

S&F in repair chromium plated Brass health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.as approved by the GE. Make Jaguar/ Roca/Kohler/Prayag

S&F in repairs 32/40mm dia PVC flexible waste pipe 80cm long with socket for union, for WHB/urinal/sink complete all as specified.

S&F in repairs wall mixer chromium plated (3 in -1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe complete all as specified & directed.Make Jaguar/ Roca/Kohler/Prayag

S&F in repairs wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including over head shower etc. complete all as specified & directed byEngr-in-Charge. Make Jaguar/ Roca/Kohler/Prayag

S&F in repairs of 300 mm dia with SS railing glass corner shelf complete all as specified & as directed. Make Jaguar/ Roca/Kohler

S&F in repairs of size 600mm x 100mm with SS railing glass shelf rectangular type complete all as specified & as directed.

S&F in repairs Shelf of PTMT 450 mm size fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified & as directed.Make Jaguar/ Roca/Kohler/Prayag

S&F in repair 2-in-1 CP bib cock complete all as specified and directed by Engr-in-Charge. Make Jaguar/ Roca/Kohler/Prayag

S&F in repair 2 way CP angle cock complete all as specified and directed by Engr-in-Charge. Make Jaguar/ Roca/Kohler/Prayag

Supply and fixing in repairs cover for rotational moulded polyethylene water storage tanks of any capacity complete as specified and directed.

S&F in repairs Sink Coupling including PVC flexible waste pipe 80cm long with socket for union, complete all as specified.

S&F as in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m

S&F in repairs vitreous china wash hand basin pedestal pattern size 450 x 525 x 195 mm shape oval of Jaquar or equivalent of PARRYWARE / MARC / KINGSTON / SOMANY / ESS ESS / SIECO / KOHLER / HINDWARE / PRAYAG / PARKO including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified & directed.

Dismantling water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified & directed by Engr-in-Charge.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

Dismantling water tanks of capacity exc 5000ltr but not exc 1000ltr and removing from site complete all as specified & directed by Engr-in-Charge.

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm dia complete all as specified & directed by Engr-in-Charge

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) all as specified.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

Material and labour for preparation of new plastered surfaces of walls apply two or more coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including priming coat a primer applied @ 0.90 litre/ 10 sqm on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Make - Asian Paints Royal (5 years product warranty) or Nerolac ( 5 years product warranty)/ Berger (5 years product warranty) at any height incuding necessary scaffolding.

Material & Labour for preparation of new plaster surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces. Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). Make - Nerolac Excel Top guard (5 years product warranty)/ Asian Paints Ultima Protek (5 years product warranty)/ Berger weather coat long life 5 (5 years product warranty) at any height incuding necessary scaffolding.

Material & Labour for preparation of old plaster surfaces, brick work, STONE, CONCRETE, ASBESTOS CEMENT SHEET surfaces applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces. Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). Make - Nerolac Excel Top guard (5 years product warranty)/ Asian Paints Ultima Protek (5 years product warranty)/ Berger weather coat long life 5 (5 years product warranty) at any height incuding necessary scaffolding.

Material and labour for preparation of new plastered surfaces of Ceiling apply two coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including priming coat a primer applied @ 0.90 litre/ 10 sqm on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Make - Asian Paints Royal (5 years product warranty) or Nerolac ( 5 years product warranty)/ Berger (5 years product warranty) at any height incuding necessary scaffolding.

Material and labour for exterior or interior waterproof/weather proof cement based 1 mm thick putty @ 1 Kg(undiluted) per sq mtr. on new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI.

M&L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.

M&L for preparation of old decorated surfaces of walls and applying Two coats of 1st Quality acrylic distemper of approved shade/tint all as specified & as directed.

M&L for preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of oil bound distemper (OBD) complete all as specified..

Material and labour for one coat of painting lines, dashes, arrows, letters etc on air field pavements and the likes exceeding 10 centimetre wide with Water based road marking paint (white, golden, yellow, dark brown and black in colour ) of approved make,any shade grade-2, after preparation of old concrete surfaces complete all as specified and as directed.

Material and labour for re-writing or repainting of existing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 centimetre high (width and thickness of letters & figures as exists on ground )with synthetic enamel paint of existing tint complete all as specified and as directed.

All as per item No70 here-in-above but exceeding 30 CM and not exceeding 60CM height complete all as specified and as directed.

Material and labour for writing letters or figures (Block, Roman, Italic or Indian) with retro reflective sheetings/ tape in red and yellow colour complete all as specified and as directe (Note :- Words shall be measured flat over all no deduction shall be made for gap between the letters).

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge.

M&L screed laid 10mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified& directed by Engr-in-Charge.

Supply only integral liquid water proofing compound (ISI marked). Make : Pidilite (Dr. Fixit Pidiproof LW) or equivalent of Fosroc / Sika / STP

M&L for roof treatment using APP based polymeric membrane minimum weighing not less than 3kg/sqm black finish reinforced with non woven polyster matt with thermo finish (wt. not less than 150 gms/sqm) laid over compatible bitumen primer @0 .30 liters per sqm and bitumen 85/25 @ 1.20 Kg per Sqm with help of torching with a proplyne or a butane gas using torch with minimum overlap of 75mm at side and 100mm at ends and sealing including applying a coat of bitumen primer & bitumen 85/25 applied hot all as per manufacturer instructuions. For parapet in a groove (No separate payment will be made and measurement will be done for horizontal surfaces) including applying a coat of heat repallant bitumen aluminium paint @ 0 .1 liter per Sqm on topof treated surface of roof complete all as specified and directed.

M&L for providing cement concrete in type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to (consolidated thickness 65mm or less) as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles.

Dismentling floor , hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. Make :1st qualityof Kajaria/HR Johnson/Somany

Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. Make :1st qualityof Kajaria/HR Johnson/Somany

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed. Make :1st qualityof Kajaria/HR Johnson/Somany

M&L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge. Make :1st qualityof Kajaria/HR Johnson/Somany

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM 1:6 complete all as specified& directed by Engr-in-Charge.

SUBHASH CHAND CONTRACTOR (BID ID -3273427)

NAQLI LAL SHARMA AND ARUN SHARMA (BID ID -3273010)

M/S CHOPRA & COMPANY (BID ID -3268698)

BHAGWATI TRADERS (BID ID -3268178)

RADHA ENTERPRISES (BID ID -3270965)