REPAIRS TO FENCING, BOUNDARY WALL, DRAINS, CULVERTS, HARDSTANDING AND RETAINING WALL INCLUDING COMPREHENSIVE WELCOME MAINTENANCE IN BLDGS OF ARC , MES , MDC AND 11 WEU AT HAPPY VALLEY

Amount

Demolition of plain cement concrete (unreinforced) in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L PCC type C1 ( 1:3:6, using 20mm graded crushed stone aggregates) as in surface channel and drain including necessary formwork complete all as specified and as directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc.complete all as specified and as directed.

M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.

M&L for Rendering, 15 mm thick plaster in cement sand mortar ( 1:4), in two layers, top 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a layer of 10 mm thick base layer etc complete all as specified and as directed. Note:(WPC shall be measured and paid separately)

Supply only integral water proofing compound, ISI marked.

Dismantling fencing wire mesh, any type etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of new GI binding wire etc complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size or type etc complete all as specified and as directed.Note:- (The unit weight of chain link shall not be less than 4 kg per sqm).

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground in natural ground etc complete all as specified and as directed.

S&F mild steel works such as Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 ( using 40 mm graded stone aggregate) as in bases for fixing of RCC / PCC posts and similar types of works etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance n.exc. 50 m from the starting point etc complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.

S&F mild steel flat iron / angle iron fixed to posts to hold chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for holding bars for chain link fencing fixed at top and bottom , including linking one to another horizontal bar conforming to Fe-410-W 432 (Part I) (Gde.E-250) Part- I quality-A or Fe 290 (Gde E-165) etc complete all as specified and as directed.

S&F Mild steel 16 to 20 mm dia screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm long but n.exc. 22.5 cm long etc complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description and girth, not otherwise described and treated with two coats synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for Rendering 15 mm thick plaster on fair faces of brick work or concrete surfaces in cement sand mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 40mm thick PCC, type B1, (1:2:4, using 20 mm graded stone aggregates) , finished cement concrete even and smooth without using extra cement and spike rolling to surface or making impression of expanded metal whilst the concrete is green etc complete all as specified and as directed.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided for ( if cement concrete is reinforced , reinforcement cut as required to facilitate demolition) etc complete all as specified and as directed.

M&L for RCC (1:2:4) type B-1 ( using 20 mm graded stone aggrgate ( nominal mix ) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) , rough finished etc complete all as specified and as directed.

M&L for 450 mm bore Reinforced Concrete pipes, class NP2 ( ISI marked) embosed with date of manufacturing, laid and jointed with cement sand mortar ( 1:3 ) including demolition or breaking up of old unserviceable one of any description etc complete all,as specified and as directed.

S&F in repair rope manila ( jute) of dia not less than 40 mm having 3 Nos tendons fixed over obstacle including tying, placing etc complete all as specified and as directed.

S&F in repair rope ( Nylon) of dia not less than 30 mm having 3 Nos tendons fixed over obstacle including weaving net of approved pattern including tying , placing etc complete all as specified and as directed.

M&L for preparation of wood or wood based materials new surfaces of any description and girth, not otherwise described and treated with two coats synthetic enamel paints over a coat of pink primer complete all as specified and directed.

M & L for preparation of old distempered and painted surfaces including washing, stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, removing nails from wall surfaces etc and applying one coat Distemper oil emulsion on the surfaces of wall to achieve smooth surface without visiable of brush/hair mark complete all as specified and directed.

M&L for Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of Distemper oil emulsion on wall surfaces to achieve smooth surface without visiable of brush/hair mark complete all as specified and directed .

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of distemper oil emulsion on ceiling complete all as specified and directed.

Complete removal existing treatment and applying 1mm thick wall care putty after prepration of old plastered surfaces of wall complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts if required and applying One coat of cement base paint on surfaces of wall complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceiling including cornices, plasters etc and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for French polishing on surface of any description, width or grit including cleaning and preparation the surface including a coat of wood filler with two or more coats all as specified and directed.

M&L for preparation of old painted steel roof surfaces of CGI sheet, over 10cm in with or girth and applying one coat of synthetic ename roof paint complete all as specified and directed.

M&L for Non-skid ceramic colour tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed.

M&L for Glazed ceramic colour tiles of size 450 x 300 x 7mm thick (premium/special quality) in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and directed.

M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and directed.of tile complete all as specified and directed.

Dismantling of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and as directed..

Taking down cement plaster on brick or concrete surfaces in anyposition including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed.

M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick plaster in cm (1:4) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra cement complete all as specified and as directed.

M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement sand mortar 1:6 including demolition of existing one complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of white or tinned with cement base paint over priming coat on exterior wall complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

S & F of 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap sheets having zinc coating @ 120 gram per sqm inclusive of both sides, fixed with coach screws/'J' type hook or L type hook and washers as in roof covering etc including dismantling any gauge, thickness, including Nainital or similar pattern roof cverings complete all as specified and directed.

S & F 0.63mm thick Plain, galvanised corrugated iron (PGI) sheets, having zinc coating @120gms/sqm as in ridges, hips, valley gutters, drip and straight flashings etc, fixed in any pattern with coach screws or self tapping screws etc complete including dismantling any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specifid and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters/purlins under 40 sqcm in section as in unframed work complete all as specified and as directed.

M&L for 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails oe beads sectional area exc. 13 sqcm but n.exc 25 sqcm complete all as specified and as directed.

S& F 4 mm thick Non asbestos cement plain building boards, fixed to timber framework with screws fixed in ceiling,flat or sloping including dismantling of ceiling board of any description complete all as specified and directed.

M&L for 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc. 6 sqcm but n.exc13 sqcm complete all as specified and as directed.

M&L for 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc 3 sqcm & n.exc 6 sqcm complete all as specified and as directed.

S&F 2nd class HW boarding 20mm thick fixed with nails as in eaves board planed one side with butt joint including dismantling boarding of any description complete all as specified andas directed.

S&F 2nd class Hardwood boarding 30mm thick fixed with nails as in boarding in floors and skirting including dismantling boarding of any description complete all as specified and as directed..

S & F of 2nd class hard wood scantling, clean sawn in any position and any description as in unframed work including dismantling of timber scantling 40 sqcm and over in section in any position complete all as specified and as directed.

S & F in repair of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) branch piece, single (Single ‘Y’ or 'T') equal or unequal complete all as specified and directed

S & F in repair 110 mm bore PVC (SWR) reducers complete all as specified and as directed.

S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and as directed.

S & F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors with necessary clamps or hooks including taking down up or down complete all as specified and directed.

Refixing GI Tubing 15mm bore old steel tubing and connections in new or old position including necessary threading and cleaning etc including tacking down complete all as speicified and directed.

S & F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors with necessary clamps or hooks including taking down complete all as specified and directed.

Refixing GI Tubing 20 mm bore old steel tubing and connections in new or old position including necessary threading and cleaning including taking down complete all as speicified and directed.

M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick /block masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and as directed.

S&F in repair Rotational moulded HDPE polyethylene 500 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position as in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx length1.5 mtr, 25 mm dia wash out pipe with pluged at one end,including all fittings such as connection pieces with GI tank nipple for inlet and outlet complete all as specified and directed.

S&F in repair rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including all fittings such as connection pieces with GI tank nipple for inlet and outlet complete all as specified and directed.

S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 g m s ) complete all as specified and as directed.

S & F in repair 15 mm bore CP fancy type bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair Stop valves 15mm dia fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed (concealed type) complete all as specified and directed.

S&F in repair 15 mm bore Angular stop cock brass chromium plated, fancy type, suitable for 15mm bore pipe complete all as specified and directed. Make : Hindware Cat No.F200005 equivalent series in KOHLER/Roca/Jaquar

S & F in repair bib tap of 15 mm dia in PTMT any colour high pressure screwed for iorn pipe and fixed. (minimum weight 90 gm) complete all as specified and as directed.

S&F in repair of 15mm dia pillar taps fancy type, cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repair 15 mm bore washing machine tap , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Plumber Cat No.EC-0215 equivalent series in Jaquar/ KOHLER/Roca.

S&F in repair 15 mm bore 2 way bib tap with wall flange , chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Jaquar Cat No.FLR -5041N equivalent series in KOHLER / Roca.

S&F in repair 15 mm bore bib cock with wall flange long body, fancy type chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Hindware, Cat No: F200011 or equrivalant series in Jaquar/Paryware

S & F in repairs PVC Connection 15mm bore with two nos PTMT nuts internally threaded and PVC washers suitable for 15mm bore, pipe line 450mm long complete all as specified and as directed.

S & F in repairs PVC Connection 15mm bore with two nos PTMT nuts internally threaded and PVC washers suitable for 15mm bore, pipe line 600mm long complete all as specified and as directed.

S & F in repairs to 600mm long PVC flexible Waste pipe to WHB/urinals/Sink including coupling/union of appropriate size complete all as specified and as directed.

S&F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen withplug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915 mm X 460mm with bowl size 410mm X 330mm X 160mm, complete all as specified and as directed.

S&F in repair kitchen plate rack made of stainless steel sheet not less than 0.63mm thick of over all size 36'' x 36'' x 10'' fixed to wall with brass screws etc complete all as specified and as directed.Make:- Prayag Cat part no. P-348 or equivalent make of Hindware / Bluestar

S & F in repair PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle, 32 mm dia PVC flush pipe of suitable length and making all connection and making good disturbed surface complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (EWC) (excluding flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repair Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm white with 110mm bore PVC ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC(1:5:10) type E2 (using 40 mm graded stone aggregates), and finishing the top surfaces to match with the existing flooring as in repairs complete all as specified and as directed.

S&F in repair ABS Body Hand Faucet with Rubbit cleaning system, 1.25 metre long easy flex tube in chrome finish & wall hook , fixed in position all as specified and as directed. Make:-Hindware Cat No. F 160027 equivalent series in KOHLER / Roca.

S&F in repair PVC syphon complete for low level flushing cistern complete all as specified and as directed.

S&F in repair stainless steel decorative pattern holder/end brackets suitable for drapery rod of 25 mm dia complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel drapery rod not less than 1mm thick cut to size and fixed in position, including Standard screw complete all as directed.

S & F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and as directed by Engineer-in-Charge.'

S & F in repair viterious china rimless single piece WC with UF soft close seat cover , Hinges, Fixing accessories set , 'P' Trap -180mm . Water closet pan of Size 390x 710 x 710mm, cistern for wall hung water closet , including all fittings complete all as specified and directed. Make: Jaquar Cat. No.VGS - WHT-81851PN or equvalant make from Hindware/Parryware.

S&F in repair brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia including one pair of fixing bracket fixed in brass screws complete all as specified and directed.

S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down for 15mm dia iron pipe and fixed complete all as specified and directed.

S & F in repair Toilet paper holder, vitreous China on surfaces of walls with chromium plated (CP) brass screws box type complete all as specified and as directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs corner glass self including bracket etc.complete all as specified and directed. Make : Jaquar cat No ACN-1173 equivalent series in KOHLER/Roca.

S&F in repair Brass CP basin mixer for mixing hot & cold water screwed down for 15mm dia iron pipe and fixed complete all as specified and directed.

S&F in repair Plastic water closet seat, white, closed pattern hydraulic seat cover for wall hung water closet complete all as specified and directed. Make: Jaquar Cat. No.CNS-WHT-WCS1 or equivalent eries in KOHLER/Roca

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) n exc 1.50 sqm each including builders hardware & removing from site complete all as specified and directed.

Taking down chowkhats or frame with shutter )without taking off shutter from the frame) exc 1.50 sqm but not exc 4 sqm each including builders hardware & removing from site complete all as specified and directed.

Taking down shutter of any description n.exc 1 Sqm each including builders hardware & removing from site complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm & n. exc 2 Sqm each including builders hardware & removing from site complete all as specified and directed.

S&F 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.20 (a) supplied and fitted to chowkats complete all as specified and as directed.

S & F 30mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.20 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F 2nd class HW 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides confirming to IS-2202 (Part-1),1983 as in Cup board complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,necessary locking device and key, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S & F Anodised aluminium window and ventilator shutters, movable (minimum two track) type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, handle , rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F in repairs door closer hydraulically regulated, cast iron body, designation no. 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F in repair mild steel as a small article like hold fast or similar items complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded aggregate) as in steel frame filling/hold fast blocking incl necessary form work complete all as specified and directed.

S&F 100 mm size butt hinges cold rolled medium weight for door shutters complete all as specified and directed.

S & F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 75 mm size butt hinges cold rolled medium weight for windows/ventilators complete all as specified and directed.

S&F 150 mm size MS barrel tower bolt stone enamelled black with bright bolt complete all as specified and directed.

S&F 100 mm size MS barrel tower bolt stone enamelled black with bright bolt complete all as specified and directed.

S&F 150 mm size MS pressed handle oval type stove enameled block complete all as specified and directed.

S&F 100 mm size MS pressed handle oval type stove enameled block complete all as specified and directed.

S&F 75mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

S & F Mild steel sliding door bolts of size 250 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F in repairs galvanised MS wire cloth 0.56mm nominal dia of wire and average width aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F galvanised MS wire cloth 0.56mm nominal dia of wire and average width aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with wooden beads in squares n.exc. 0.50 sqm in each pane including hacking out old broken glass with puty or fixed with wooden bends complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with wooden beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 3 mm thick frosted on one side sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F in repairs 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all a specified.

S & F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F in repairs Mild steel sliding door bolts of size 250 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Resecuring or easing & adjusting without taking down the shutter of any description exc 1 Sam and n.exc 2 Sqm in same opening complete all as specified and directed.

M&L for preparation of wood and wood based materials new surface of any description and girth 10cm wide other wise described applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F in repair 18/19mm thick Particle board for insulation purposes, fixed with nails to timber framework complete all as specified and as directed.

S & F in repair 12mm thick plywood, type BB (with BWR) complete all as specified and as directed.

M & L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and as directed.

S&F 2nd class HW plain fillets, square, rectangular wrought bullnosed splayed chamfered or rounded of sectional area n.exc 3 sq cm complete all as specified and as directed.

S & F in repair Continuous (piano) hinges,mild steel, bright finish or electro galvanised with width of flap 40mm (when open) complete all as specified and directed.

S & F Magnatic catcher and connected plate brass body to shutters and frame as per Sample complete all as specified and as directed.

Forming jambs, etc. to openings (to foregoing item), with cement mortar (1:6) including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.

S & F in repairs stop valve of 15mm dia in PTMT any colour high pressure screwed for iron pipe and fixed (min weight 90 gms) complete all as specified and directed.

SCHEDULE A PART-II (E/M WORKS) Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch, socket outlets, bell push, ceiling rose etc and making good disturbed surfaces of walls with cement sand mortar (1:6) and white/colour wash to match with existing surfaces etc complete all as directed by Engineer -in -Charge .

M&L for Point wiring with two single runs PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping of suitable size with all fittings and accessories including PVC rectangular board of suitable size and drawing continuous earth wire of PVC insulated FRLSH grade, unsheathed stranded copper conductor of size 1.5 Sqmm (ISI Marked), green colour as continuous earth wire terminated connected to common earth dolly including sunken box for following type of point wiring for one light / fan point controlled by one way switch including making good disturbed of wall complete all as specified in SSR Part-I, 2009 and Part-II, 2010 and as directed by Engineer-in- Charge .

All as per item No 156.00 above but for one 2/3 pin socket outlet 5/6 Amps point on independent board etc complete all as directed by Engineer -in -Charge .

All as per item No 156.00 above but for one 2/3 pin socket outlet 5/6 Amps point on same board etc complete all as directed by Engineer -in -Charge .

All as per Item No.156.00 here-in-above but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 4.0 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 4.00 sqmm green in colour as earth continuity conductor connected to common earth dolly in PVC casing caping complete all as specified and directed.

All as per item No 156.00 above but for one call bell point controlled by one push button switch etc complete all as directed by Engineer -in -Charge .

Supply and fix Bell push, piano type, 5/6 Amps, single pole, 230 V (ISI mark) completed all as specified and directed.

Supply and fix, call bell ding dong , AC, 230 V ,single pole complete all as specified and directed.

Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5/6 Amps complete all as specified and directed.

Supply and fix socket outlet (ISI marked), 2/3 pin and 5 Amps, 240 volts complete all as specified and as directed.

Supply and fix switch socket combination (ISI marked), 2/3 pin and 5 Amps, 240 volts , flush type complete all as specified and as directed.

Supply and fix switch socket combination (ISI marked), 2/3 pin and 15 Amps,240 volts complete all as specified and as directed.

S&F in repair Decorative wall mounted LED batten fittings with all accessories, 1X18 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed. Make:Havells Cat part No. LHEXACP7PN1W018 or Philips Cat Part No- DX 18 UJJAWAL or CROMPTON Cat Part No. LCTL 18 CDL.

S&F in repair Decorative wall mounted LED batten fittings with all accessories, 1X 10 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed Make :- Crompton Cat part No. LCTL-10-CDL or Havells Cat part No. LHEXACP71N11010 or model from make: Philips

S&F lamp holder, insulated body, with back plate for batten fitting complete all as specified and as directed.

S&F Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.

Fixing only Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in repair MCCB Distribution board, VTP&N double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link,415 Volts 4 way, fixed on wall duly grouted in solid block wall or on wooden board with necessary electrical connection complete all as specified and directed by Engineer -in- Charge. Make:- Havells Cat Part No. DHDLVDRWGOF004 or equivalent model from make:- Legrand / Schneider /C&S/GE .

Supply and fix in repair MCB Distribution board , 240 volts ,SPN ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link,12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer -in- Charge. Make : Havells cat part no. DHDPSHODRW12 or equivalent make:-Legrand / Schneider /C&S/GE .

Supply and fix in repair MCB Distribution board , 240 volts ,SPN ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 08 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer -in- Charge. Make : Havells cat part no. DHDPSHODRW08 or equivalent make:-Legrand / Schneider /C&S/GE .

Supply and fix in repair MCCB four pole , 415 Volt, 63Amps,16KA , fixed thermal & magnetic setting complete all as specified and directed .Make:-Havells Cat Part No:IHLGNF0063 / L&T cat part no.CM9793300H2 or equivalent model from Make:- Siemens / Schneider / Legrand.

Supply and fix in repair MCB SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Havells cat part no. DHMGCSNF006-32 or equivalent make in Legrand / L&T Schenieder/C &S.

Supply and fix in repair MCB TPN, 240 Volt, 63 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Havells cat part no. DHMGCTNF063 or equivalent make in Legrand / L&T Schenieder/C &S.

Supply and fix in repair MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Havells cat part no. DHMGCSPF006-032 or equivalent make in Legrand / L&T Schenieder/C &S.

Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size including taking down old unserviceable one complete all as specified and directed.(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- KEI / RR Kabel / Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size including taking down old unserviceable one complete all as specified and directed.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- KEI / RR Kabel / Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

S&F in repair LED lamp 7W, B22 AC supply etc complete all as specified and as directed. Make:- Havells LHLDERUEMD8X007 or equivalent model from Philips / Bajaj.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing including taking out old unserviceable one complete all as shown in Electrical Plate No 3 of SSR part -I.

S & F LED post top lantern suitable for 1x 40 watt LED post top Made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP 65 protection including all accessories and taking down old unserviceable one complete all as specified and directed. Make; Bajaj Cat Part No-BGCL 40W LED or equivalent make of model: Philips/CG

S&F in repair Wall bracket decorative LED light fitting with LED lamp 9 Watt with necessary connection complete all as specfied and as directed by Engineer -in -Charge, . Make:-HAVELLS Cat Part No. LHFOAJE2TZ11060 or equivalent model from Philips / Bajaj.

Supply and fixing in repair LED light 25 Watt including connection with 3 core cable 1.5 sqmm complete all as specified and and directed Make:- Bajaj .Cat Part No BRLEP 25W LED WH or Havells Cat Part No-ENDURACITYLITE25W or equivalent make of Philips.

Supply & fixing in repair Exhaust fan 230 volts , 250 mm plastic body with louver , ventilator DX including making necessary cutting hole ( circular / rectangular) and grouting in wall 4 nos GI bolts to hold fan and making good to disturbed surfaces with cement sand mortar ( 1:4) with necessary colour wash / distemper to match with existing shade of wall including necessary electric connection, outer wooden box for fan fix and testing etc complete all as specified and as directed. Make:- Havells / Bajaj / CG.

S & F in repairs integral decorative LED bollard 9 Watt with Lamp and all accessories including taking down old unserviceable one complete all as specified and directed.Make: Bajaj Cat Part No-BGBOM 650 9W LED or equivalent Philips/CG

Ms Amrik Singh Bahra