GE(S)BTD 69 OF 2026-27 PERIODICAL SERVICES AND WELCOME MAINT OF OTM AND MD ACCN UNDER AGE BR-II OF GE(S) BATHINDA AT BATHINDA MIL STN

Material and labour for rendering / plastering 10mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, complete including taking down old plaster all as specified and as directed.

Material and labour for preparing any concrete surface of ceiling by sand papering or by the other mean and after preparing the surfaces of ceilings including cornices and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

Material and labour for rendering / plastering 15mm thick (matching with existing plaster thickness) in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, including taking down old plaster complete all as specified and as directed.

Material and Labour prepration of internal surfaces new/old of walls/ceilings/soffits and applying acrylic wall care putty on (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc and with and including applying 02 coats of interior emulsion paint (light shade as approved by GE ) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including one coat of interior emulsion primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed.

Material and labour for rendering / plastering 15mm thick (matching with existing plaster thickness) in cement mortar (1:4) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, including taking down old plaster complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces on wall surfaces of any description, preparation of surfaces by mechanized sander having suction vacuum bag using smart periodical methodology complete all as specified and applying 1.5 mm to 2.5 mm thick wall care putty exterior grade on prepared surfacses in two layers and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Cost for the same for scaffolding for plastering & painting etc is included in the rates quoted by the contractor.

M&L for Complete removal of existing treatment of any description on old wall surfaces of any description, preparation of surfaces by mechanized sander having suction vacuum bag using smart periodical methodology complete all as specified and applying 1.5 mm to 2.5 mm thick wall care putty exterior grade on prepared surfacses in two layers and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Cost for the same for scaffolding for plastering & painting etc is included in the rates quoted by the contractor.

M&L for Complete removal of existing treatment of any description on old wall surfaces of any description, preparation of surfaces by mechanized sander having suction vacuum bag using smart periodical methodology complete all as specified and applying 1.5 mm to 2.5 mm thick wall care putty interior grade on prepared surfacses in two layers and Applying two coats of distemper of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. the Cost for the scaffolding etc is included in the rates quoted by the contractor.

Material and labour for preparation of old treated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old iron steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.