REPAIRS TO PATH HARDSTANDING INTERLOCKING TILES ALONG WITH MISC BR AND EM WORKS AT DRDO ESTATE PASHAN

Amount

Demolition of cement concrete in ground floor and paving n.exc 150 mm thick (below & above ground level) complete all as specified and directed.

Removal of old debries/demolished materials from site to a distance exceeding 1.50Km but not exceeding 5Km and depsoting where directed complete all as specified and directed. Note: The measurement shall be carried out duly signed by engineer-in-charge and the contractor before execution of this item and record accordingly in MB after completion of removal work.

Demolition of stone slabs and tiles bedded and pointed in any type of mortar any thickness & any description complete all as specified and directed.

Demolition of brick work or stone / boulder masonry in cement mortar or cement lime mortar complete all as specified and directed.

Material & labour for brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 with old size bricks, complete all as specified and directed.

Material and labour for 15mm thick renedering on brick/block masonary in Cement Mortar(1:4) complete all as specified and directed by the Engr-in-charge.

Material and labour for 40mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed

Material and labour for Ultra designer tiles with grey cement and pigment of approved shade & design by GE, of area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm of 25mm thickness (coloured Granito floor tiles) set, jointed and pointed in neat cement slurry with pigment as in floors over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed

Material and labour for coloured Non Skid ceramic tiles 7 mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 6 complete all as specified and directed.

Material and labour for Light coloured Glazed ceramic tiles in vertical surface as in skirting or dado 300 mm X 450mm X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :4 as backing coat complete all as specified and directed.

Supply and fix in repairs aluminum composite sheet cladding using 4 mm thick sheet of approved make consisting of a core of 3mm natural polyethylene core sandwitched between two skins (0.5mm each) of aluminum alloy with outer surface in all colour coating of PVDF paint in fully automatic coil coating process. The PVDF coated finished surface to factory protected with self-adhesive peel offoil tested to withstand at least 6 months exposure to local weathering conditions. The composite sheet cut and bend to shape profiles as required to, including perimeter extrusions base frame, extruded stiffeners, expansion fasteners & silicone sealant (Dow corning 789) required for installation as per approved elevation drawing as directed including necessary accessories complete in all respects. The rates shall be including the cost of all materials, tools, tackles, manpower, fuel, consumables, lead and lifts at all levels, design, fabrication, erection, finishing and dismantling of scaffolding and testing of water tightness, etc. as per manufacturerer's instructions / specifications complete all as specified and directed. Make: Alstrong, Euro Panel Products Ltd, Viva.

Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dust & dirt etc. including draining off water if any from pot holes, complete all as specified and directed.

Material and labour for applying evenly a priming/tack coat with paving bitumen (VG-10 grade) @5Kg/10Sqm with mechanical sprayer on old black top surfaces complete all as specified and directed.

Material and labour for premixed semi dense asphaltic concrete 30mm thick consolidated thickness, using combined graded aggregate i.e. crushed stone coarse aggregate, fine aggregate (sand) & filler (inherent filler/OPC 43 grade) cement of physical properties as specified and as per table given (to refer SSR Part-I of 2020), pre-heated mixed with 5.5% binder content by weight of total mix using VG-30 grade bitumen, laid with mechanical paver including rolled & compacted to a uniform smooth surface with 8 to 10 tonne power road roller, complete all as specified and directed. Notes:- (i) Thickness of semi dense asphaltic concrete and quantities of materials as mentioned in particular specifications/SSR are the minimum. The quoted rate shall also be deemed to include for provision of more materials in comparison to those mentioned/specified in the item, if required, to achieve the required level, gradient, camber and shape complete all as specified & directed by the GE. (ii) Hot mix plant of adequate capacity shall be used for heating and mixing stone and fine aggregate and binder (bitumen) and semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver complete all as specified & directed by the GE. (iii) Contractor’s quoted rates shall be deemed to include all these aspects.

Material and labour for painting 2mm thick thermoplast fluorescent paint colour white or golden yellow or any other shade conforming to BS standard 3262 with 20% glass beads (inter mixed) applied hot with automatic(commercial) machine drive in strips after preparation of surfaces as per manufacturer’s instructions & according to the specifications laid down by IRC & MOST (Ministry Of Surface Transport)- Specifications 2001 (4th revision), making lines, broken lines/dashes, arrows etc. on roads and other like surfaces not exceeding 10cm in width or girth, complete all as specified and directed.

Supply and fix in repair, raised reflective pavement markers (Cat eyes) of 6 LEDs made of plastic body moulded from HIPS (Hi-impact polystrene) or ABS plastic conforming to ASTM, D type 4280 type H and complying to specifications of category A and reflective panels consisting of number of lenses containing single or dual prismatic cubes capable for providing total internal reflection of light entering the lens face with height not exceeding 20mm and length and width 100 mm and the area of each retro-reflecting (surface shall be 13Sqcm on each face and shall preferably be 35 +/- 5 degree slope to base to face), fixed as per manufacturer's instructions, complete all as specified and directed. Make:- 3M/Tata BP solar/SA traffic safety kolkata/Bons light Pvt Ltd Ahmedabad/Asian controls Mumbai

Taking out old steel tubular sewaged poles 11 metre long and removing to store for safe custody or issue under schedule of credit complete all as specified and directed.

Supply and fix HT steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-55, 11 metre long complete all as specified and directed. Note : Earth work will paid and measured separately

Excavation in trenches not exceeding 1.5metre wide and not exceeding 1.5metre deep for foundation of poles, cables, pipes stays and struts etc, and getting out complete all as specified and directed for following type or soil complete all as specified and directed. (a) Soft soil

(b) hard & dense soil

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soils complete all as specified and directed.

Removing surplus excavated soil to a distance not exceeding 50 metre depositing where directed at a level not exceeding 1.5metre above the starting point complete all as specified and directed.

Material and labour for dry crushed stone dust/ river sand filling in trenches to required width at bottom and top of cable cushioning including spreading leveling and consolidation complete all as specified and directed. Note : Punned thickness shall only be measured and paid.

Supply and laying sub class B bricks, old size, laid flat adjacent to each other, perpendicular to cable with width equal to length in trenches for protection of cable complete all as specified and directed.

Supply and fix GI pipe 40 dia mm medium grade for passing the cable from road/ wall/ pol/ trench for cable safety complete all as specified and directed.

Supply and fix in repair connect, test and commissioning of LT underground cable XLPE insulated, armoured heavy duty electric cable with aluminium multi stranded aluminium conductor heavy duty 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following sizes including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings/walls without cable duct) complete all as specified and directed by the Engr-in-Charge for the following :- Notes : (i) Excavation, sand cushioning, brick will be measured and paid separately under relavant item here in before . (ii) Cost of jointing material e.g. lugs, thimbles, nut bolt and washers shall include in quoted rates. (a) 35 Sqmm 3.5 core

(b) 25 Sqmm 4 core

(c) 16 Sq mm 4 core

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25metre deep below normal ground level) with top edge of plate not less' than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) type B1 using 20mm graded crushed stone aggregate pit and 10mm thick C.I. cover with arrangement of hinge to 40mm x 40mm x 6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection. complete all as specified and directed.

Supply and fix in repair decorative LED land scape light of 8 watt garden/path light fitting cone series act as imposing street furniture, the elegent yet minimalstic design acts a silent observer and giving light, diffuser at the upper portionacts a beacon of path guidance in landscape environment,Luminaire Type complete all as specified and as directed by Engr-in-Charge Make : Cat : BAMBOOBLS8WLEDPSYMTOPC of Havells or technocommercial equivalent in Philips/ Wipro/ Crompton

Supply & fix in repair new generation energy saving and enviromental freindly LED post of lantern 35 watt long life, aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs including fixing arrangement at 5omm GI pipe 2 metre long vertcal position complete all as specifed and directed by Engineer-in-Charge Make : Cat : CORALPT35WLED757PSYMTOPC of Havells or technocommercial equivalent in Philips/ Wipro/ Crompton

Supply and fix in repair new generation energy saving environmental friendly, long life, exclusive innovative die-cast aluminium IP-65 flood light with high power LEDs of 120W as light source, suitable for highlighting architectural facade highmast and general purpose lighting, interchangeable electronic driver high efficiency longer life, protection against high surges , high /low voltage cutoff, open/short circuit protection and high power factor LEDs as light source including brackets on new pole and fitted street light pole complete all as specified and as directed. Make : JETAIRISFL120WLED757ARWBLTG of Havells or technocommercial equivalent in Philips/ Wipro/ Crompton

Supply and fix in repairs pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 140mm x140mm x100mm internal comprising one , one No SP MCB single pole of capacity 6 Amps 240 volts and one No terminal for loop in & loop out suitable for single phase street light system including nuts and bolts and connecting up complete, MS clamp fabricated from 25mm x 3mm MS flat iron complete all as specified and directed. Make : Sintex

Material and labour in repair for 3 single core PVC insulated unsheathed copper conductor cable multistranded 2 x 2.5 sqmm +1 x 1.5 sqmm passing through in steel pole DB to street light luminaires complete all as specified and directed. NOTE :- 3 run of wire shall be measured as one length

Supply and Fix in repair on walls/floor/ in trenches galvanised steel tubings medium grade with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc.of size 50 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair on walls/floor/ in trenches galvanised steel tubings medium grade with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc.of size 25 mm diacomplete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair gun metal gate vavle with iron wheel head screwed both ends for GI pipe complete all as specified and directed (a) size of gate valve 25 mm dia

(b) Size of gate valve 50 mm dia

Material and labour for cutting of roads/ plinth for removal/ lalying of pipe and making good the disturbed surfaces as per existing adjoining surfaces complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundations of stays and poles, coping of poles etc complete including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in foundations of for making good road/ foot path/ hard standing/ drain/ bldg plinth protection complete all as specified and directed.

M/s S.R lahoti

M/S.J.V.Datar

Baljeet Singh Choudhari

S.K.HARAL

Sunil Constructions

R. K. Industrial Fabricators

M/S SAMRUDHI CONSTRUCTION