ED/04/PANDG/26-27/02

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared . CPWD 2023 V-I, P-91 , CN-2.31

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. CPWD 2023 V-I, P-91 , CN-2.32

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge ..CPWD 2023 V-II, P-220 , CN-15.7.4

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m . CPWD 2023 V-I, P-87 , CN-2.8.1

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for alllift . CPWD 2023 V-I, P-90 , CN-2.25

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) . CPWD 2023 V-I, P-105 , CN-5.1.2

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns etc. CPWD 2023 V-I, P-98 , CN-4.3.1

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars . CPWD 2023 V-I, P-110 , CN-5.22.1

Providing, designing, fabricating, supplying and installing in position heritage/historical image panels of 4 mm thick exterior grade Aluminium Composite Panel (ACP), consisting of 3 mm FR-grade mineral core sandwiched between two aluminium sheets of 0.5 mm thickness each, including preparation of approved artwork/design and CNC/router cutting of the ACP sheet to approved historical/heritage image/profile, including all cutting, shaping, edge finishing and drilling; providing and fabricating necessary secondary supporting frame of mild steel hollow sections/structural sections including perimeter and intermediate members, cleats and connection plates; welding, cutting, grinding and fixing; applying one coat of approved zinc-rich/anti-corrosive primer and two coats of approved exterior-grade protective paint/aluminium finish to MS framework; providing stainless steel screws, bolts, nuts, washers, spacers, cleats, sealant and other necessary fixing accessories; fixing the complete ACP panel and MS secondary MSH of 40 mm x 40 mm x 3 mm supporting frame to the existing MS supporting structure, including all necessary connections, alignment, plumbing, lifting, transportation, loading/unloading, tools and tackles, wastage, cleaning and finishing complete as per approved drawing/design, manufacturer's specifications and as directed by the Engineer-in-Charge. . Rate Analysis

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete . CPWD 2023 V-I, P-170 , CN-10.2