Special Repair to Bldg No T-1 and T-3 (Single JCOs Accn) under GE (West) Delhi Cantt-10

Amount

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge,roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets or frame complete all as specified and directed.

Providing & fixing false ceiling 12mm thick semi perforated micro tengular edge at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F Mild steel screw bolts shank dia 12 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Fe-410- W(Gde-E-250) quality-B complete all as specified and directed.

S&F mild steel rolled work as in roof trusses, (framed),trussed,purlin,crane gantries,rails and heavy bracket framing (Beam,angle,channel or flat section) including distance pieces,cleats etc,confirming to gradeFe 410 -W (GdeE- 250) quality-A, complete all as specified and directed.

S&F for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. .

M&L for two coat of synthetic enamel painting on new steel surfaces over 10cms width or girth over and incld a coat of red oxide primer incld preparation of surface etc all as specified and directed.

M&L for two coat of synthetic enamel painting on new wooden surfaces over 10cms width or girth over a coat of pink primer etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and including disposal of all debris out side MoD land complete all as specified and directed..

M&L for 40 mm thick cement concrete type B0 (1:2:4) using 12.5 mm graded crushed stone aggregate as in sub bases complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles (300x600x7mm/450x600x7mm ) on vertical surfaces such as skirting and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in C:M 1:3 rough to receive tiles complete all as specified and directed by engr in charge.

Taking down Chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges (75mm long powder coated)/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (for windows and gauzed doors) all as specified and directed

S&F 4 mm thick figured glass/ pin head type (using one way mirror film or privacy film) and glazing in squares not exc 0.5 Sqn in each pane complete all as specified and directed.

M&L PCC 1:3:6 type C1 (20mm graded crushed stone agg) as in anchoring hold fast, bed plate etc all as specified and directed.

S&F curtain rails 25 mm dia Harrison rails, mild steel, chromium plated with fixing designer brackets, stops and bulbs, rollers etc complete all as specified and directed.

S&F floor door stopper Overall length of cover plate 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed.

Taking down carefully cement plaster from stone/brick walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on external walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed.

M&L for 10mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on external walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over and incld a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for complete removal of exixting treatment of walls and applying two coat of oil bound distemper over and incld a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed.

Providing and applying wall care putty of 1 mm thick over plastered surface to prepare the surface even and smooth. complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and Precast concrete articles, complete all as sfd and directed.

M&L for Brick work with Sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls, built in Cement mortar 1:4 complete all as specified and directed.

M&L for Brick work with Sub class 'B' old size burnt bricks straight or curved on plan exceeding 6m mean radius, built in Cement mortar 1:6 complete all as specifiedd and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl Screed bed or bedding layer 15 mm thick of mortar 1:4 complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15CM thickness (below or above ground level) complete all as specified & directed.

M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-1(using 20 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight complete all as specified and directed.

M&L for 100 mm thick Cement concrete type D2 (1:4:8) using 40 mm graded crushed stone aggregate as in sub base all as specified and directed.

M&LProviding and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.

kota stone Mirror polishing of existing floor where ever required to give high gloss finish complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15mm thick cement screed base in CM 1:4 incl demolition of old stone slab of any description complete all as specified and directed.

S&F in repair grating doom 100 mm dia of CP complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed.

Supplying and laying of 20 mm external dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all plain fittings in trenches/ walls including dismantling old GI pipes including complete all as specified and directed.

Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass and plain fittings including dismantling old GI pipes complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls fixed with MS clamps and shoe at ground level incl dismantling up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls fixed with MS clamps and shoe at ground level incl dismantling drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L in repair for PVC floor trap of 100mm dia,plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified & directed.

S&F 75 mm PVC (SWR) bends any radius complete all as specified & directed.

S&F PVC (SWR) 110 mm vent cowl complete all as specified & directed.

Supply and fix in repairs chromium plated single tubular towel rail 20mm dia, D type 60 cm long between flanges, including a pair of CP brass brackets complete all as specified and directed.

Supply and fix for chromium plated soap dish all as directed.

S&F in repair vitreous china wash hand basin, white flat back, size 580 x 450mm excluding taps, waste pipe chain and plug and porcelain but including brackets, 32 mm dia waste coupling complete all as specified and directed.

S&F Vitreous China half stall urinal of size 465x355x265 mm, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified & directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed.

Supply & fixed Vitreous china urinal partition white of size 310x700 mm Urinal partitions slabs terminating about 40cm above floor line complete all as specified and directed.

S&F in repairs Two way Bib cock, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified.

S&F in repair Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified.

S&F Brass CP mixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed.

S&F in repair European vitreous china wash down water closet pan (excluding flushing cistern but including flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and pvc seat cover white).Flush pipe complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair flushing cistern 10ltr capacity syphonic action type low clevel with inlet ball valve ,float valve and handle including bracket etc. complete all as directed.

S&F in repair 15mm dia bib taps, cast copper alloy chromium plated with capstan head fancy type,screwed down,screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F in repairs 15 mm bore chromium plated fancy type stop valve/angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete all as specified & directed.

M&L 1000 litres capacity rotational moulded polyethylene water storage tanks ISI marked triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polyethylene float and fly nut complete and GI tank nipple, screwd for iron pipe incld dismantling of tank tank nipple and float valve complete all as specified and directed.

M&L cement concrete Endura parking tiles size 30cmx30cmx15mm thick coloured reflective type glossy finish machine pressed ,vibro compacted, rubber moulded with grey cement and pigment, and pointed in neat cement slurry in floors incld 15mm thick screed bed in CM 1:4 etc incl 25 mm thick PCC 1:2:4 type B1(20mm graded crushed stone aggregate) all as specified and directed

Supply and fabrication & fixing of Modular Kitchen cupboards, lower and upper cabints ( depth of 45 Cm up to 70 Cm) etc ,front side, bottom, top, and partions etc made out of 15-18 mm thick HDHMR board and back side 12 mm board (action tesa or equivalent ) with the front face shall be covered with laminate of high gloss from merino and the edges to be covered via 1.3 mm thick edge bending tape (colour of glossy laminates as approved by GE) Colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters and SS handles, sliding channels, C/J gola profile for handel less, etc as required complete all as specified and as directed including frame work etc all as specified and directed..

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantt and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately complete all as specified and directed..

M&L for Providing precast cement concrete 50mmx50mm ,1:2:4 copings. kneelers, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc with plain fair faces ,including chamfers, weatherings, throatng etc. and setting in mortar complete with joints to match complete all as specified and directed.

M&L for Providing precast cement concrete louvres and jallies type B 0 1:2:4 ( using 12.5 mm crushed stone aggregate) set in cement mortar 1:4, 35 to 40 mm thick (mea sured solid), including all mould- ings but excluding frame complete all as specified and directed.

S&F 100mm long aluminium butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.

S&F 125mm long aluminum anodised handle complete all as specified and directed.

S&F 150mm long aluminium anodised tower bolt complete all as specified and directed.

S & F stainless steel butt hinges 100mm long medium weight etc complete all as specified and directed.

S & F 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified & directed.

S & F aluminum anodised handle 150 mm long cast type complete all as specified & directed.

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.50m depth, for foundation etc. and getting out in soft/loose soil.

Returning filling in excavated approved earth in to trenches around pipe etc after laying of pipes and testing complete including watering and well ramming in 25 cm layers complete all as specified & directed.

Removing surplus soil to a distance beyond 5 km upto total distance of 15 km out side defence area where directed complete all as specified & directed..

M&L for 150mm nominal size Double wall corrugated HDPE pipes stiffness class SN 8 high density,polyethylene pipe resistent to chemicals,easy and light weighted,long living,low friction,flexible,sun resistant pipe and laid in trenches incl demolition of old pipes complete all as specified and directed.

S&F factory made SFRC (Steel fibre reinforcement concrete ) manhole cover medium duty M-25 grade,75mm thick with SFRC frame of clear size exc. 0.35 Sqm but n.exc 0.90 Sqm, provided with provision of two lifting hooks welded at appropriate location, complete all as specified & directed.

S&F Door closer hydraulically regulated,aluminium extruded section body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F Corner glass shelf complete all as spd and directed

Dismantling of brick tiles or terracing single layer on roof and removal of rubbish beyond MOD land complete all as specified and directed.

Demolition of mud phuska on roof slabs,any thickness including cleaning of roof surfaces and removing the debris outside the MOD land beyond 5 km upto total distance of 15 km complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-I (20mm graded crushed stone agg) in padding,roof kerb or mud slops, rounded or chamfered on edges, coping, kneelers, kerb water tough and the like incl weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified & directed.

M&L for water proofing treatment to roof surface with APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surface 11057Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces including 10mm thick rendering in CM 1:3 over PCC padding with water proofing compound complete all as specified and directed. Note:-(Rate of WPC shall be included in unit rate)

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) on roof padding surface rough finished complete all as specified and directed.

M&L providing and injectiong chemical emulsion for post anti termite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified and directed.

S&F 30mm thik Flush shutters, solid core construction, with block board core and plywood face panels, both face are covered with deco rative face veneer with lipping/frame to match complete all as specified and directed.

S&F providing 30mm thick factory made wire mesh solid WPC door shutter consisting of density 650 kg/cum manufactured by an ISO 9001-2015 certified company door to be panneled with SS mosquito mesh and XTN aluminum mesh for additional strength and safety purpose. ( Conforming as per IS 4020) The door should be water prooof , termite proof, fore retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardware should be fixed with 19x6mm size steel screws etc complete as per direction of engr in charge, manufacturers specifications & drawings Note: Fixture /fittings other than hinges shall be measured & paid under relevant item.

M&L for cement concrete plain tiles 30cmx30cmx22-25mm thick machine pressed set jointed,grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement in neat cement slurry with grey cement and no pigment in floors with screed bed in 15mm thick CM 1:6 complete all as specified and directed.

M & L cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as spd and directed.

S & F powder coated tower bolt 75 mm long fixing with ss screw fixing to AI windows complete all as spd and directed.

S & F powder coated Aluminium Handle 75 mm long fixing with ss screw fixing to AI windows complete all as spd and directed.

M & L applying two coats of damp proof coat of approved make over plastered surface (after complete removal of existing treat) including preparation of walls surface (each coat will be applied at coverage of approx 3.7 to 4.2 sqm/ltr without dilution all as per manufactures instruction) complete all as specified and directed.

M & L preparation of new surface over 10 cm width or girth not otherwise decribed applying two coats Aluminum paint over a coat of primer complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated branded modular metal flush box concealed in walls with suitable modular inner and outer plate for housing modular switches, socket outlet and fan regulators etc , all as specified and directed for the followings:-

(a) One light/fan/bell point controlled by one way switch (switch to be measured and paid separately)

(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per above item No 106. but with cable 2.5 Sqmm size 1100 volts grade for One 3 Pin socket 15A Independent board

Supply and fix switch modular type single pole one way 6 Amps all specified and as directed.

Supply and fix modular switch 16 Amps one module single pole one way.

Supply and fix modular socket 3/5 pin multi purpose 6 Amps flush type .

Supply and fix modular socket multi purpose 2-in-1, 6 pin 6/16 Amps 2 module.

Supply and fix modular ceiling fan regulator , step type for BLDC ceiling fan of suitable capacity and module complete all as specified and directed.

Supply and fix switch modular type single pole bell push 6 Amps.

M&L bell ding dong AC,230 volts,single pole.

Supply and fix in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.

Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and deposit to MES store complete accessories all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Taking down MCB DBs of any type and size all as specified and directed.

S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of factory made epoxy polyester powder coated distribution board 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.

S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down exhaust fan of any size and type, dismantling blades and deposit to MES store with complete accessories all as specified and directed.

Supply & fix exhaust fan, steel body AC single phase. 230 V of size 300mm sweep with blades and frame and louvers complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200/250mm with making opening on the wall/surface in round/square shape as per site requirement complete all as specified.

Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

A S CONSTRUCTION CO. (BID ID -3405695)

Kunal Construction Co. (BID ID -3403761)

M/s M M BAHL (BID ID -3407040)

SHRI JI ENTERPRISES (BID ID -3407067)

MAA SANTOSHI ENTERPRISES (BID ID -3406972)

MINHAS CONSTRUCTIONS (BID ID -3405139)

S GOURAV PRAKASH ENTERPRISES (BID ID -3403681)

JAIPAL AND BROTHERS (BID ID -3407161)