Replacement of Old PVC Water Storage Tanks and Providing and fixing of steel fabric enclosure around PVC Tank and all other works contingent thereto in House No. 23-46 Type-II New Campus at MAMC Agroha

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. HSR 5.7 5.7.4 In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. HSR 5.23 5.23.2 Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. HSR 5.70

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: HSR 6.1 6.1.1 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level HSR 6.33 Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6.33.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for 6.30.1 Foundations, footings, bases of columns, etc. for mass concrete 6.30.3 Suspended floors, roofs, landings, balconies and access platform

Providing a floating coat of 1.50 mm thick neat cement laid in one operation to the topping. HSR 10.14

15 mm cement plaster on the rough side of single or half brick wall of mix : HSR 11.6 11.6.1 1:4 (1 cement: 4 fine sand)

Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): HSR 11.26 11.26.1 Flush/ Ruled/ Struck or weathered pointing

Cement rendering on plaster 1 mm thick HSR 11.52

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) HSR 12.7 12.7.2 Kiln seasoned and chemically treated Hollock wood 12.7.2.2 30 mm thick shutters

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR 12.98 12.98.1 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR 12.99 12.99.3 200x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR 12.102 12.102.1 125 mm

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR 11.76

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. HSR 11.77

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR 11.78

Providing and fixing hard drawn steel wire fabric 75 mm X 25 mm rectangular mesh with 3.25 mm dia wire fixed on steel windows of standard rolled sections with 3 mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws welded complete in all respect. HSR 13.18

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. HSR 13.29 13.29.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. HSR 11.114

Public Health Dismantling disjointing, removal and carriage to stores, G.I. pipelines, specials, valves and fittings. HSR 20.50 20.50.2 20 mm internal diametre of the pipeline

20.50.3 25 mm internal diametre of the pipeline

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. HSR 22.85 Internal work - Exposed on wall 22.85.2 20 mm nominal outer dia Pipes

22.85.3 25 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : HSR 22.98 22.98.1 25 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : HSR 22.103 22.103.3 25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. HSR 22.181

Providing & fixing cPVC Union 20mm (N.S.)

Providing & fixing cPVC Union 25mm (N.S.)

Providing & fixing cPVC Tank Nipple (N.S.)

Shishpal Govt. Contractor

the hisar mahabir colony co-op l/c society ltd