Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹38.5 LAccepted-AOC | 1 | Accepted-AOC LOWEST AND REASONABLE | |
| 2 | 2₹41.7 L+₹3.2 L (8.37%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
18 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJOR ANIMESH TRIPATHI
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
CERTAIN REPAIR TO AVIATION ASSETS OF TECH AREA OF 660 AVN SQN AT PATIALA MIL STN
2022_MES_546167_2
GE(N)/PAT-19/2022-23
Open Tender
Civil Works
Lump-sum
210 days
PATIALA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH PATIALA
₹80,000
Yes
4 Nov 2022
29 Sept 2022
20 Oct 2022
29 Sept 2022
18 Oct 2022
6 Oct 2022
Amount
Schedule 'A'Part -I (B/R SCHEDULE)
Total amount of Sch 'A' Part I (B/R Schedule)
Schedule 'A' Part-II (B/R Schedule) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.
Taking down aluminium windows / vetilators at a height of 10 to 15 m, dismantling windows / vetilators and fixing new aluminium sections to existing windows / vetilators, assembling the windows to existing size and re-fixing the same window/ vetilators in same opening and replacing glass with 5mm thick PVC transparent sheet, complete all as specified and directed. Note : (i) Aluminium section and PVC sheet will be measured seprately. (ii) The quoted rates deemed to includes rates of scaffolding to work at a height of 10-15m hangars.
Supply only powder coated 50 microns aluminium extruded section for windows / ventilators, complete all as specified and directed.
Supply only 4mm thick PVC transparent sheet for glazing, complete all as specified and directed.
Providing supporting arragements for RCC slab by providing Steel shuttering plates and steels props as per requirement and direction of Engineer-in-charge, complete all as specified and directed.
S&F Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.28mm min thickness for chowkats or frame & shutters made of size 44.45x44.45x1.29mm min thickness for side rails and middle rail, 114.3X44.45X1.29mm min thickness for top rails and bottom rails complete
S&F aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm min thickness and shutters made of 63.5X31.75X1.29mm min thickness complete all as specified and directed.
S&F Powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm min thickness, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm min thickness, with built in locking system for each leaf complete all as specified.
Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm min thickness complete fixed in all respect as specified.
S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) below & above middle/lock rail in powder coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beads 20 mm size with and complete all as specified and directed by Engr-In- Charge
S&F 4.80 mm thick glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete.
S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete.
S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.
S&F powder coated aluiminium tower bolt 200mm long complete.
S&F powder coated aluiminium tower bolt 150mm long complete.
S&F powder coated aluminium handles 150mm complete.
S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters compelte.
S&F integrated lock for aluminium doors with 2 keys, complele all as specified and directed..
S&F 4.80 mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete.
Factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified
S&F for anodised aluminium frame powder coated for fixed type partition (standard two panel pattern) using aluminium section of size 83 x 44 x 2mm thick, including necessary jointing cleats, rubber packing, anodised aluminium snap beading, fixed to floor and walls by means of cadmium plated steel screws complete all as specified and directed by Engr-in-Charge.
Preparation of plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed.
Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion, complete all as specified and directed.
Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion, complete all as specified and directed.
Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces of wall or false ceiling over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion, complete all as specified and directed.
S&F Vitreous china urinal, stall type, of size 330x300x450mm incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, waste coupling 32mm , bottle trap, pointing urinal back in cement; connection for discharge pipe incl necessary packing,union and 15mm CP urinal spreader and CP connection pipe complete all as specified.
S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed.
S&F PVC Wall panelling of section sizes 150x10 mm (colour/pattern as approved by Accepting Officer) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer all as specified.
S&F false ceiling of 12.5mm thick gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by Accepting Officer and including supply and fixing of items all as specified as below :-
Item no. 31 contd... 1. Suspended Plain Ceiling includes Perimeter Channel {Material-GI(IS513),YS-260Mpa,Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. 2. Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. 3. Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} 4. Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. 5. Single layer of 12.5mm tapered edge Plain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. 6. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape. Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed.
S & F Poly coated GI frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having to equal flanges of 15mm each and web of 45 mm suspended from soffit and approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section (not exc 1.2 metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acorss the intermediate channel at 457mm centre to centre and hangers 6mm dia GI (upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x3mm size 60mm long complete with and including 7mm thick PVC laminated gypsum tiles of size 595x595mm of approved design of make Acoster/Ploca/ Armstrong or equivalent as approved by GE all as specified & directed.
S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified.
S&F Angular Stop Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.
S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified .
S/F stainless steel soap dish, complete all as specified and directed.
M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.
M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 100 mm and 8-10 mm thick in any pattern of light & dark tiles as approved,on vertical surfaces such as in skirting/dado etc ,length of each unit not less than 600 mm and height not more than 150mm, set and including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Skirting should be flushed with the wall plastering.
M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering.
M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.
M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 20 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.
M & L 60 mm thick rubber moulded, lacqured finished, coloured Machine pressed precast concrete interlocking of M-30 paver block any shape and size confirming to IS 15658 - 2006 filled with grey cement and pigment over sand cushioning 25mm thick, complete all as specified
Demolition of cement concrete as in PQC/tarmac/pavements/taxi tracks/hanger floors/sub-base etc of any descriction/thickness by mechanical means including removal of material obtained from demolition to adistance exc 1.5 Km but n. exc. 5 Km and depositing where directed all as specified.
M&L 250 mm thick DLC (M-15) with 7 days compressive strength as 10 Mpa using 150 Kg of cement/cubic metre as per design mix including spreading, rolling and consolidating to required gradient and camber using mechanical paver complete all as specified and directed by Engineer in Charge. Note : No price adjustment shall be made in the variation in the quantity if excess cement used / approved in the work as result of design mix.
M&L 400 micron polythene film as per IS-2508, white / transparent colour, laid over sand layer including all necessary cutting, overlaps not less than 300 mm and waste complete all as specified and directed by Engineer in Charge. Note : (i) The rates for laps shall be deemed to be included in the quoted rate shall not be measured seperately. (ii) Sand layer shall be measured and paid seperately.
M&L for painting lines, dashes (continuous/interrupted), arrows, letters etc on pavement of runways/taxi tracks/halipads/tarmac etc not less than 2mm thick with hot applied thermoplastic road marking paint of make Shivalik (Prismo) white or yellow by using automatic mechanical road painting machine complete all as directed by Engineer-in-Charge.
S&F laying factory made, un-reinforced precast cement concrete tiles of size 250mm x 250mmx 22mm, machine pressed, as on roof surface, confirming to IS : 1237-1980, laid over and including 15mm thick screed bed in Cm 1:4, set jointed and pointed with grey cement slurry complete all as specified and directed.
DELTA CONSTRUCTION CO
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .