Work of Renovation and Improvement of the existing LT Distribution Network at various places under the jurisdiction of the Section office Balli, Sub Division-IV, Cuncolim, Division-XVI, Margao.

Amount

COST OF MATERIAL

Supply of 11.00meters long R.C.C. Pole as per drawing No.CEE E 698 Rev (2) and conforming to IS 785(1998) as amended upto date. The Component used for pole shall conform to following IS amended upto date. Ordinary Port land cement 53 grade IS 12269 Aggregate IS 383 1970 Torsteel IS 1786 7985 MS bar IS 432 P 1 and 2 1982 Erection includes transportation, dragging of pole to the site of pit, clearing of bushes etc and excavation of pit of Size 0.60 x 0.60 x 1.5 mts in any type of soil and back filling the pit after erection of the pole in pit by rubble and excavated soil as shown in the Drg No. EE IV LT9.0RCC. ( Rubble is dealt separately )

Supply of 9.0meters long R.C.C. Pole as per drawing No.CEE E 565 Rev 3 and conforming to IS 785 1998 as amended upto date. The Component used for pole shall conform to following IS amended upto date. Ordinary Port land cement 53 grade IS 12269 Aggregate IS 383 1970 Torsteel IS 1786 7985 MS bar IS 432 P 1 and 2 1982 Erection includes transportation, dragging of pole to the site of pit, clearing of bushes etc and excavation of pit of Size 0.60 x 0.60 x 1.5 mts in any type of soil classified under Soft Strata of Appendix A of CPWD-8 and back filling the pit after erection of the pole in pit by rubble and excavated soil as shown in the Drg No. EE IV LT9.0RCC. (Rubble is dealt separately)

Supply of 7.5meters long R.C.C. Pole as per drawing No.CEE E 724 Rev 3 and conforming to IS 785 1998 as amended upto date. The Component used for pole shall conform to following IS amended upto date. Ordinary Port land cement 53 grade IS 12269 Aggregate IS 383 1970 Torsteel IS 1786 7985 MS bar IS 432 P 1 and 2 1982 Erection includes transportation, dragging of pole to the site of pit, clearing of bushes etc and excavation of pit of Size 0.60 x 0.60 x 1.25 mts in any type of soil classified under Soft Strata of Appendix A of CPWD-8 and back filling the pit after erection of the pole in pit by rubble and excavated soil as shown in the Drg No. EE IV LT7.5RCC. (Rubble is dealt separately)

Supply of stay set for 7.5 Mtrs long RCC Pole as per technical specification (i) Stay rod with plate LT 11KV line is 1set, (ii) GI Tum Buckle with eye bolt 11KV is 1Set, (iii) Break Insulator 8KV (44KN) is 1No. (iv) HDGI stay wire 7 10SWG is 2.9Kgs. (v) HDGI stay clamp for RCC pole 7.5mts is 1Set (vi) G. I. nuts and bolts 2 X 200 gram nb is 0.4kg

Supply of HDGI stay rod with plate complete for 9 mts. Long RCC pole as per technical specification (i) Stay rod with plate LT 11KV line is 1set, (ii) GI Tum Buckle with eye bolt 11KV is 1Set, (iii) Break Insulator 8KV (44KN) is 1No. (iv) HDGI stay wire 7 10SWG is 3.74Kgs. (v) HDGI stay clamp for RCC pole 9mts is 1Set (vi) G. I. nuts and bolts 2 X 200 gram nb is 0.4kg

Supply of HDGI stay rod with plate complete for 11 mts. Long RCC pole as per technical specification:-(i) Stay rod with plate LT 11KV line is 1set, (ii) GI Tum Buckle with eye bolt 11KV is 1Set, (iii) Break Insulator 8KV (44KN) is 1No. (iv) HDGI stay wire 7 10SWG is 4.57Kgs. (v) HDGI stay clamp for RCC pole 11mts is 1Set (vi) G. I. nuts and bolts 2 X 200 gram or nb is 0.4kg

Supply, transportation, filling and packing by ramming of rubble of hard laterite stone under floors including watering and consolidating with earth and backfilling of poles and stays.

Supply of Enamelled danger board as per DRG No. CEE 490

Supply of Anticlimbing device.

Supply of Hot dip galvanised DP structure material consisting of the following a] Transformer bed channel ISMC of size 100 x 50 mm, 2.74 mts long, 2 pieces alongwith transformer belting angle ISA of size 50 x 50 mm, 2740mm long, 2 pieces alongwith side supports as per Drg No. EE IV DP Bed Ch for transformer. b] GOAB switch mounting channel ISMC of size 75 x 40 mm, 2740mm mts long, 2 pieces alongwith side supports as per Drg No. EE IV DP GOAB CH for each GOAB switch. c] HG fuse mounting channel ISMC of size 75 x 40 mm, 2740mm mts long, 2 pieces alongwith Lightening Arrestors mounting angles ISA of size 50 x 50 mm, 2.74 mts long alongwith side supports as per Drg No EE IV DP GOAB HG CH for HG fuse set. d] Intake Channel ISMC for mounting Disc Insulators of size 100 x 50 mm, 1 piece as per Drg No. Drg No. EE IV DP INTAKE CH .e] The work shall include all fabrication, drilling of holes, welding, cutting etc. The hot dip galvanisation shall be done only after fabrication work is completed.

Supply of 12KV rated voltage GOAB switches tilting type, outdoor, manually operated, triple pole, single break, conforming to IS 9921 Part1 to V as amended upto date and detailed specifications. Each set shall comprise of six pedestal and three tilting post insulators. Insulator should be factory cemented by the manufactures of the insulators and have minimum 320mm creepage distance and AB switches contacts shall be of copper or copper alloy. The AB switch shall be of current rating 200 A. The isolators shall be as per technical specification.

Supply of 11KV H.G. Fuse (set of three HG fuses) units 200 Amp as specified in DRG No CEE E 786 Revision and as per detailed technical specifications.

Supply of 9 KV, 5KA nominal discharge current Metal Oxide gapless distribution class lightning arrestor conforming to IEC 60049 4 and IS 3070 Part 3 1993 as amended upto date suitable for 11 KV 50 HZ effectively earthed neutral system with necessary mounting arrangements and connector suitable to connect ACSR conductor upto overall diameter 12.30 mm. The lightening arrestors shall be as per technical specification.

Supply of HDGI Stay clamps L.A for 11 mts. Long RCC pole as per DRG No. CEE E 508 (R1)

Supply of HDGI S.A. or L.A. cross arm clamps for 11 mts. Long RCC pole as per DRG No. EE-II 20 2008

Supply of HDGI L.A. or S.A. cross arm clamps suitable for 9mts RCC pole as per Drg No. CEE E 524.

Supply of HDGI L.A. or S.A. cross arm clamps suitable for 7.5 RCC pole as per Drg No. CEE E 524.

Supply of MS Distribution Box alongwith 12nos. 200A Kit Kat fuse and MCCB of 400Amps, 415 Volts. The box shall be fabricated with MS sheet 12 gauge with overlapping rain proof slit ventilators on both sides of the distribution box with wire mesh to prevent entry of insects with pin head door hinges locking arrangement and shall have required number of bus bars made out of Aluminium strips of size 40 x 10mm for connecting MCCB, fuses and cables (for 4 feeder arrangement) and other accessories. The box shall also have 'magnetic hold' arrangement to ensure that the box doors always remains in 'closed' position when shut even without latching.

Supply of Loss Level II 100KVA, 11 0.433KV 3 PH. Aluminium Wound Distribution Transformer as per technical specification.

Supply 11 KV Disc Insulators 70 KN with H.D.G.I. Metal parts as per technical specification.

Supply of a) 11 KV brown glazed porcelain Pin Insulator with minimum failing load of 5 KN and the Minimum creepage distance of 320 mm conforming to IS 731 1971 as amended upto date and b) Forged G. I. Pin conforming to IS 2486 part 1 and 2 as amended upto date suitable for 11 KV glazed porcelain pin insulators conforming to IS 731 71 as amended upto date. G. I pin shall conform to reference S 165 N fig. 5 of IS 2486 (Part II) 74 as amended upto date. Dimensions ‘X’ in said fig. shall be 150 mm (screwed 100 mm). Pin shall be supplied along with one suitable G. I. hexagonal nut and G. I. spring washer. Minimum failing load of pin shall be 10 KN. HT Porcelain insulator.

Supply of HDGI 11 KV V-shape cross arm of Channel 75x45mm as per Drg No.CEE E 408.

Supply of HDGI 11 KV cross arm made out of ISMC Channel 75X40mm as per DRG No EEIV 11KV X Arms for cut point and Guarding.

Supply of Top fitting made out of ISMC Channel 75 X 40mm as per DRG No EEIV 11KV X Arms.

Supply of G.I. earthing pipe 2500mm long, 40mm dia class B fabricated and perforated filled with homogenous mixture of 20Kgs of Charcoal, 20Kgs of salt and sand soil inclusive of excavation, backfilling and spreading of excavated earth evenly as per Drg No. CEE E 829. The work includes excavation of pit in any type of soil classified under Soft Strata of Annexure A of CPWD 8.

Supply of ACSR ' Weasel ' conductor of size 6 or 1 or 2.59mm. The stringing rate includes transportation, jointing, jumpering with aluminium tape etc. 3.31 Kms of the conductor shall be used for stringing of 11 KV line, 0.28Kms for providing guarding and 0.25 Kms shall be used for jumpering on DP. The remaining 0.4 Kms of conductor shall be used for earthing of transformer centre which includes crimping of lugs and terminating the conductor to all the equipments of the DP with the lugs of appropriate size. The conductor shall be as per technical specification.

Supply of AAC ' ANT ' conductor of size 7 or 3.14mm. The stringing rate includes transportation, jointing, etc. 7.44 Kms of conductor shall be strung as phases for LT line. The conductor shall be comply to the technical specification.

Supply of AAC ' GNAT ' size 7 2.21mm conductor for neutral, streetlight and jumpering as well as guarding. The conductor shall be comply to technical specification.

Supply of HDGI 4 pin LT cross arm channel type as per Drg. No. CEE E 705.

Supply of HDGI 2 pin LT cross arm channel type as per Drg. No. CEE E 704.

Supply of a) L.T. brown glazed porcelain pin insulators of size 100mm x 70mm conforming to type 1 fig 1 of IS 1445 1977 with amendment 2 of Feb.1981 (second revision) as amended upto date. Minimum failing load shall be 3.5kN & b) Forged G. I. Pin conforming to IS 7935 1975 as amended upto date suitable for L.T. porcelain pin insulator type 1 conforming to fig.1 of IS 1445 77 with amendment No. 2, Feb.1981, of size 100 x 70 mm. G. I. pin shall comprise of G. I. nut and spring washer and conform to fig. No. 2 of IS 7935 1975. Minimum failing load of pin shall be 3.5 KN. The LT Pin Insulator shall be as per technical specification.

Supply of a) L.T. brown glazed shackle insulators of size 100mm x 115mm conforming to fig.No.4 and type 2 of IS 1445 77 as amended upto date. Minimum failing load shall be 16KN and b) G. I hardware suitable for L. T. shackle insulators of size 100 x 115 mm. conforming to type 2, fig. 4 of IS 1445 77 as amended upto date. Hardware or fitting shall conform to fig. 4 of IS 7935-1975 as amended up to date, comprise of 2 G. I. strips, 2 G. I. bolts and 2 nuts with spring washers. The LT shackle insulator shall be as per Technical specification.

Supply HDGI G.I. Hexagonal head bolts and hexagonal nuts conforming to IS 1363 part I to III 1992 as amended upto date of the size 3 and half inch x 5 by 8 inch or 4 inch x 5 by 8 inch, 6 inch x 5 by 8 inch, 8 inch x 5 by 8 inch or as per the requirement.

Providing of Low Tension metering to the DTC by Supplying of following Materials i) Epoxy resin Cast L.T. CT coil of 300 5A, Class 0.5s, 50Hz,660V, Burden 15VA conforming to IS 2705 1992 as amended upto date. ii) Electronic 3Phase,4wire ,Trivector Meter ,LT CT operated 3x240V, 5A,50Hz, class 0.5s, Category A (DLMS COSEM Protocol) for DTC with RS 232 Optical port and compliance to BIS ICS Doc ETD 13 (6211) and latest. iii) 1.1KV multistand copper conductor 2.5sq.mm, XLPE insulated, armoured control cable conforming to relevant IS amended upto date. iv) Pole mounted M.S Box ( outdoor type) for Electronic Meter as Drawing No.EE VIII 64(REV) v) Al. L shape flat 40mm suitable for mounting on bushing rod and brass lug

Supply and Fixing of CAMR Modem as per technical specification.

Supply of single core, 185sq.mm, unarmoured Al conductor PVC insulated 1.1KV grade power cable as per Technical Specification and as per IS:7098 (Part I 1988) with latest amendment carrying ISI mark.

Supply of Aluminium Lugs, size 185 sq.mm as per technical specification

Cost of Erection Erection

Erection of 11.00meters long R.C.C. Pole as per drawing No.CEE E 698 Rev (2) and conforming to IS 785(1998) as amended upto date. The Component used for pole shall conform to following IS amended upto date. Ordinary Port land cement 53 grade IS 12269 Aggregate IS 383 1970 Torsteel IS 1786 7985 MS bar IS 432 P 1 and 2 1982 Erection includes transportation, dragging of pole to the site of pit, clearing of bushes etc and excavation of pit of Size 0.60 x 0.60 x 1.5 mts in any type of soil and back filling the pit after erection of the pole in pit by rubble and excavated soil as shown in the Drg No. EE IV LT9.0RCC. ( Rubble is dealt separately )

Erection of 9.0meters long R.C.C. Pole as per drawing No.CEE E 565 Rev 3 and conforming to IS 785 1998 as amended upto date. The Component used for pole shall conform to following IS amended upto date. Ordinary Port land cement 53 grade IS 12269 Aggregate IS 383 1970 Torsteel IS 1786 7985 MS bar IS 432 P 1 and 2 1982 Erection includes transportation, dragging of pole to the site of pit, clearing of bushes etc and excavation of pit of Size 0.60 x 0.60 x 1.5 mts in any type of soil classified under Soft Strata of Appendix A of CPWD-8 and back filling the pit after erection of the pole in pit by rubble and excavated soil as shown in the Drg No. EE IV LT9.0RCC. (Rubble is dealt separately)

Erection of 7.5meters long R.C.C. Pole as per drawing No.CEE E 724 Rev 3 and conforming to IS 785 1998 as amended upto date. The Component used for pole shall conform to following IS amended upto date. Ordinary Port land cement 53 grade IS 12269 Aggregate IS 383 1970 Torsteel IS 1786 7985 MS bar IS 432 P 1 and 2 1982 Erection includes transportation, dragging of pole to the site of pit, clearing of bushes etc and excavation of pit of Size 0.60 x 0.60 x 1.25 mts in any type of soil classified under Soft Strata of Appendix A of CPWD-8 and back filling the pit after erection of the pole in pit by rubble and excavated soil as shown in the Drg No. EE IV LT7.5RCC. (Rubble is dealt separately)

Erection of stay set for 7.5 Mtrs long RCC Pole as per technical specification :-(i) Stay rod with plate LT 11KV line is 1set, (ii) GI Tum Buckle with eye bolt 11KV is 1Set, (iii) Break Insulator 8KV (44KN) is 1No. (iv) HDGI stay wire 7 10SWG is 2.9Kgs. (v) HDGI stay clamp for RCC pole 7.5mts is 1Set (vi) G. I. nuts and bolts 2 X 200 gram nb is 0.4kg

Erection of HDGI stay rod with plate complete for 9 mts. Long RCC pole as per technical specification:- (i) Stay rod with plate LT 11KV line is 1set, (ii) GI Tum Buckle with eye bolt 11KV is 1Set, (iii) Break Insulator 8KV (44KN) is 1No. (iv) HDGI stay wire 7 10SWG is 3.74Kgs. (v) HDGI stay clamp for RCC pole 9mts is 1Set (vi) G. I. nuts and bolts 2 X 200 gram nb is 0.4kg

Erection of HDGI stay rod with plate complete for 11 mts. Long RCC pole as per technical specification:-(i) Stay rod with plate LT 11KV line is 1set, (ii) GI Tum Buckle with eye bolt 11KV is 1Set, (iii) Break Insulator 8KV (44KN) is 1No. (iv) HDGI stay wire 7 10SWG is 4.57Kgs. (v) HDGI stay clamp for RCC pole 11mts is 1Set (vi) G. I. nuts and bolts 2 X 200 gram or nb is 0.4kg

Erection of Enamelled danger board as per DRG No. CEE 490

Fixing of Anticlimbing device.

Erection of Hot dip galvanised DP structure material consisting of the following a] Transformer bed channel ISMC of size 100 x 50 mm, 2.74 mts long, 2 pieces alongwith transformer belting angle ISA of size 50 x 50 mm, 2740mm long, 2 pieces alongwith side supports as per Drg No. EE IV DP Bed Ch for transformer. b] GOAB switch mounting channel ISMC of size 75 x 40 mm, 2740mm mts long, 2 pieces alongwith side supports as per Drg No. EE IV DP GOAB CH for each GOAB switch. c] HG fuse mounting channel ISMC of size 75 x 40 mm, 2740mm mts long, 2 pieces alongwith Lightening Arrestors mounting angles ISA of size 50 x 50 mm, 2.74 mts long alongwith side supports as per Drg No EE IV DP GOAB HG CH for HG fuse set. d] Intake Channel ISMC for mounting Disc Insulators of size 100 x 50 mm, 1 piece as per Drg No. Drg No. EE IV DP INTAKE CH .e] The work shall include all fabrication, drilling of holes, welding, cutting etc. The hot dip galvanisation shall be done only after fabrication work is completed.

Erection of 12KV rated voltage GOAB switches tilting type, outdoor, manually operated, triple pole, single break, conforming to IS 9921 Part1 to V as amended upto date and detailed specifications. Each set shall comprise of six pedestal and three tilting post insulators. Insulator should be factory cemented by the manufactures of the insulators and have minimum 320mm creepage distance and AB switches contacts shall be of copper or copper alloy. The AB switch shall be of current rating 200 A. The isolators shall be as per technical specification.

Fixing of 11KV H.G. Fuse (set of three HG fuses) units 200 Amp as specified in DRG No CEE E 786 Revision and as per detailed technical specifications.

Fixing of 9KV, 5KA nominal discharge current Metal Oxide gapless distribution class lightning arrestor conforming to IEC 60049 4 and IS 3070 Part 3 1993 as amended upto date suitable for 11 KV 50 HZ effectively earthed neutral system with necessary mounting arrangements and connector suitable to connect ACSR conductor upto overall diameter 12.30 mm. The lightening arrestors shall be as per technical specification.

Fixing of HDGI Stay clamps L.A for 11 mts. Long RCC pole as per DRG No. CEE E 508 (R1)

Fixing of HDGI S.A. or L.A. cross arm clamps for 11 mts. Long RCC pole as per DRG No. EE-II 20 2008

Fixing of HDGI L.A. or S.A. cross arm clamps suitable for 9mts RCC pole as per Drg No. CEE E 524.

Fixing of HDGI L.A. or S.A. cross arm clamps suitable for 7.5 RCC pole as per Drg No. CEE E 524.

Erection and commissioning of MS Distribution Box alongwith 12nos. 200A Kit Kat fuse and MCCB of 400Amps, 415 Volts. The box shall be fabricated with MS sheet 12 gauge with overlapping rain proof slit ventilators on both sides of the distribution box with wire mesh to prevent entry of insects with pin head door hinges locking arrangement and shall have required number of bus bars made out of Aluminium strips of size 40 x 10mm for connecting MCCB, fuses and cables (for 4 feeder arrangement) and other accessories. The box shall also have 'magnetic hold' arrangement to ensure that the box doors always remains in 'closed' position when shut even without latching.

Erection, testing and commissioning of Loss Level II 100KVA, 11 0.433KV 3 PH. Aluminium Wound Distribution Transformer as per technical specification.

Fixing of 11 KV Disc Insulators 70 KN with H.D.G.I. Metal parts as per technical specification.

Erection of a) 11 KV brown glazed porcelain Pin Insulator with minimum failing load of 5 KN and the Minimum creepage distance of 320 mm conforming to IS 731 1971 as amended upto date and b) Forged G. I. Pin conforming to IS 2486 part 1 and 2 as amended upto date suitable for 11 KV glazed porcelain pin insulators conforming to IS 731 71 as amended upto date. G. I pin shall conform to reference S 165 N fig. 5 of IS 2486 (Part II) 74 as amended upto date. Dimensions ‘X’ in said fig. shall be 150 mm (screwed 100 mm). Pin shall be supplied along with one suitable G. I. hexagonal nut and G. I. spring washer. Minimum failing load of pin shall be 10 KN. HT Porcelain insulator.

Fixing of HDGI 11 KV V-shape cross arm of Channel 75x45mm as per Drg No.CEE E 408.

Fixing of HDGI 11 KV cross arm made out of ISMC Channel 75X40mm as per DRG No EEIV 11KV X Arms for cut point and Guarding.

Fixing of Top fitting made out of ISMC Channel 75 X 40mm as per DRG No EEIV 11KV X Arms.

Erection of G.I. earthing pipe 2500mm long, 40mm dia class B fabricated and perforated filled with homogenous mixture of 20Kgs of Charcoal, 20Kgs of salt and sand soil inclusive of excavation, backfilling and spreading of excavated earth evenly as per Drg No. CEE E 829. The work includes excavation of pit in any type of soil classified under Soft Strata of Annexure A of CPWD 8.

Stringing of ACSR ' Weasel ' conductor of size 6 or 1 or 2.59mm. The stringing rate includes transportation, jointing, jumpering with aluminium tape etc. 3.31 Kms of the conductor shall be used for stringing of 11 KV line, 0.28Kms for providing guarding and 0.25 Kms shall be used for jumpering on DP. The remaining 0.4 Kms of conductor shall be used for earthing of transformer centre which includes crimping of lugs and terminating the conductor to all the equipments of the DP with the lugs of appropriate size. The conductor shall be as per technical specification.

Stringing of AAC ' ANT ' conductor of size 7 or 3.14mm. The stringing rate includes transportation, jointing, etc. 7.44 Kms of conductor shall be strung as phases for LT line. The conductor shall be comply to the technical specification.

Stringing of AAC ' GNAT ' size 7 2.21mm conductor for neutral, streetlight and jumpering as well as guarding. The conductor shall be comply to technical specification.

Fixing of HDGI 4 pin LT cross arm channel type as per Drg. No. CEE E 705.

Fixing of HDGI 2 pin LT cross arm channel type as per Drg. No. CEE E 704.

Fixing of a) L.T. brown glazed porcelain pin insulators of size 100mm x 70mm conforming to type 1 fig 1 of IS 1445 1977 with amendment 2 of Feb.1981 (second revision) as amended upto date. Minimum failing load shall be 3.5kN & b) Forged G. I. Pin conforming to IS 7935 1975 as amended upto date suitable for L.T. porcelain pin insulator type 1 conforming to fig.1 of IS 1445 77 with amendment No. 2, Feb.1981, of size 100 x 70 mm. G. I. pin shall comprise of G. I. nut and spring washer and conform to fig. No. 2 of IS 7935 1975. Minimum failing load of pin shall be 3.5 KN. The LT Pin Insulator shall be as per technical specification.

Fixing of a) L.T. brown glazed shackle insulators of size 100mm x 115mm conforming to fig.No.4 and type 2 of IS 1445 77 as amended upto date. Minimum failing load shall be 16KN and b) G. I hardware suitable for L. T. shackle insulators of size 100 x 115 mm. conforming to type 2, fig. 4 of IS 1445 77 as amended upto date. Hardware or fitting shall conform to fig. 4 of IS 7935-1975 as amended up to date, comprise of 2 G. I. strips, 2 G. I. bolts and 2 nuts with spring washers. The LT shackle insulator shall be as per Technical specification.

Fixing HDGI G.I. Hexagonal head bolts and hexagonal nuts conforming to IS 1363 part I to III 1992 as amended upto date of the size 3 and half inch x 5 by 8 inch or 4 inch x 5 by 8 inch, 6 inch x 5 by 8 inch, 8 inch x 5 by 8 inch or as per the requirement.

Providing of Low Tension metering to the DTC by Installing and commissioning of following Materials i) Epoxy resin Cast L.T. CT coil of 300 5A, Class 0.5s, 50Hz,660V, Burden 15VA conforming to IS 2705 1992 as amended upto date. ii) Electronic 3Phase,4wire ,Trivector Meter ,LT CT operated 3x240V, 5A,50Hz, class 0.5s, Category A (DLMS COSEM Protocol) for DTC with RS 232 Optical port and compliance to BIS ICS Doc ETD 13 (6211) and latest. iii) 1.1KV multistand copper conductor 2.5sq.mm, XLPE insulated, armoured control cable conforming to relevant IS amended upto date. iv) Pole mounted M.S Box ( outdoor type) for Electronic Meter as Drawing No.EE VIII 64(REV) v) Al. L shape flat 40mm suitable for mounting on bushing rod and brass lug

Erection of single core, 185sq.mm, unarmoured Al conductor PVC insulated 1.1KV grade power cable as per Technical Specification and as per IS:7098 (Part I 1988) with latest amendment carrying ISI mark.

Crimping of Aluminium Lugs, size 185 sq.mm as per technical specification

Dismantling

Removing the existing transformer and re erecting the same.

Removing of DT Metering Unit alongwith modem as per technical specification.

Re fixing of DT Metering Unit alongwith modem as per technical specification.

Removing of the existing 7.5 m RCC pole and handing over to Sub Divisional Engineer against acknowledgement as per technical specification.

Removing of the existing 9.0 m RCC pole and handing over to Sub Divisional Engineer against acknowledgement as per technical specification.

Removing of the existing 11.00m RCC pole and handing over to Sub Divisional Engineer against acknowledgement as per technical specification.

Removing and re fixing of the existing service connection single phase.

Removing and re fixing of the existing service connection three phase.

Removing of the existing main cable of sizes 3 and half Core 240sq.mm or 185sq.mm or 120sq.mm and handing over the same to the concerned Sub Divisional Engineer against acknowledgment.

Removing of the existing feeder cable of sizes 3 and half Core 185sq.mm or 120sq.mm and 90sq.mm and 35sq.mm and handing over the same to the concerned Sub-divisional Engineer against acknowledgment.

Removing of 4 Pin cross arms assembly with Clamps, Nut and Bolt as per technical specification.

Removing of 2 Pin cross arms assembly with Clamps, Nut and Bolt as per technical specification.

Removing of LT shackle insulator and handing over to the concerned Sub Divisional Engineer against acknowledgement.

Removing of LT Pin Insulator and handing over to the concerned Sub Divisional Engineer against acknowledgement.

Removing of the existing Old deteriorated ANT conductor as per technical specification.

Removing of the existing Old deteriorated GNAT conductor as per technical specification.

Removing of old existing distribution box as per technical specification.

Removing of old existing GOAB switch and handing over the same to the concerned Sub Divisional Engineer against acknowledgment.

Removing of old existing HG fuse units and handing over the same to the concerned Sub Divisional Engineer against acknowledgment.

Removing of old existing Lightening arrestors and handing over the same to the concerned Sub Divisional Engineer against acknowledgment.

Removing of old existing structure materials as per technical specification.

Removing of old existing 11KV disc insulators and handing over the same to the concerned Sub Divisional Engineer against acknowledgment.