REPAIRS/ MAINTENANCE OF WATER SUPPLY INSTALLATIONS OF B/R NATURE IN TECH AREA AT AF STN SIRSA

Amount

Demolition Cement Concrete (un-reinforced) in Ground Floors and Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed by Engineer-in-Charge.

Taking down unserviceable Rolling Shutters of any size and with all the accessories and in any position, complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work built in Cement Mortar and in any Position including all Quoins, arches and Pillars, etc., complete all as specified and as directed by Engineer-in-Charge.

Taking down Wooden Chowkhats or frame with shutter of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each but not exc. 4.0 Square Meter, complete all as specified and as directed by Engineer-in-Charge..

Taking down Wooden Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed by Engineer-in-Charge.

Taking down Steel Window with Frame(complete), area not exc. 1.5 Square Meter Each,complete all as specified and as directed by Engineer-in-Charge.

Dismantling Stone Slabs and or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed Engineer-in-Charge.

M&L for repairing of RCC Projection, Chajjas, Roofs Facia, Column etc, upto Double Storey Building height adhering proper safety precaution and including necessary preparation i.e. scraping, cutting, chiseling and cleaning exposed reinforcement surfaces of damaged, loosed RCC surfaces and applying one coat of cement slurry and filling the surfaces with Cement Concrete 1:1½:3 (12.5mm graded crushed stone aggre-gate) and reinforced with welded wire mesh in patches area, complete all as directed by Engineer in Charge. NOTE : Cost of Form work and welded Mesh shall be deemed to be included in the Quoted Unit Rate..

Dismantling damaged/unserviceable Asbestos cement (Plain/ Corrugated/ Semi corrugated etc) sheets of any descriptions in roof coverings, complete all as as directed by Engineer in Charge.

Dismantling Structural Steel or Mild Steel Work of any description not otherwise provided for, complete all as specified and as directed Engineer-in-Charge.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed Engineer-in-Charge.

Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old Glazing Pins/Spring Clips or fixed with Beads, complete all as specified and as directed Engineer-in-Charge.

M&L for Reinforced Cement Concrete 1:2:4 type (20mmgraded crushed stone aggregate) in Beams, Cantilevers, lintels over 1.50m span and similar items., etc., complete all as specified and as directed Engineer-in-Charge. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Item.

M&L for RCC Pre-cast Cement Concrete 1:2:4 (12.5mm graded crushed stone aggregate) as in Louvres and Jallies, 25mm thick (measured solid) with all mouldings but excuding frame, complete all as specified and as directed Engineer-in-Charge.

M&L for Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed Engineer-in-Charge.

M&L for Brick work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from Item No. 3 here-in-before) including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed Engineer-in-Charge.

Dismantling Floor, Paver Tiles, Chequered Tiles, Hearth or Wall Tiling, etc. including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed Engineer-in-Charge.

M&L for Coloured Glazed Ceramic Tiles 350x250x7mm/ 450x350x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed Engineer-in-Charge. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

S&F 35mm thick factory made plain framed, panelled shutter 2nd class HW rail and type with lock rail complete all as specified and as directed Engineer-in-Charge.

S&F for Pressed Steel Frame for door of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed Engineer-in-Charge.

M&L for preparing Old Treated/Painted Surfaces by Removal of Complete existing Paint from RCC Overhead Reservoir (area approximately 700 Sqm) of any description, not otherwise described including Minor Repair work (i.e. PCC 1:2:4 is plastered with weld mesh in cement mortar 1:3) and applying Two Coats of Weather Coat Exterior Paint with approved Tint (in Camouflage pattern) as per manufacturer's instructions over a Coat of Primer on all RCC/Plastered Surfaces) including and applying two Coat of Synthetic Enamel Paint (First quality) over a coat of red oxide primer to all Steel Surfaces viz Mild Steel Railings, Ladder, etc. after preparing Old Treated/Painted Steel Surfaces, complete all as specified and as directed Engineer-in-Charge and panel of 9mm BWP commencing ply or 12mm vener red particle board with commercial reneering on both faces the ___ of rail and S4/c as per IS:1003(Part-I) kiln seasoned and chemically pressure treated complete and all are specified. NOTE :The contractor shall quot the rate for following item which are under. (i) Height of over head Tank Reserviour is 24.00 meter (ii) Weather coat area shall be 600 sqm (iii) Synthetic enamel paint shall be 100 sqm.

M&L for factory made Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under supply Item.

M&L for Floor (Paver) Tiles 300x300x9.0 to 10mm, highly abrasive, Anti-skid, Impact Resistance, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

S&F Aluminium Barrel Tower Bolt 200mm long ( Weight not less than 210 Gram) , Extruded Section, complete all as specified and as directed Engineer-in-Charge.

S&F Aluminium alloy, anodized,Sliding Door Bolts having length of Bolt 250mm long with Hasph Stable (Bolt type) and Fixing Clips of sheet cast or extruded section and fixing Bolts and sliding Bolts of extruded section and fixing,complete all as specified and as directed Engineer-in-Charge.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Pitch 190mm, Depth 29mm and Tensile strength of 550 Mpa as in Roof Covering, fixed with Aluminum Self Tapping Screws of size 50/75mm and Aluminum Washers of suitable size, complete all as specified and as directed Engineer-in-Charge.

S&F Mild Steel Butt Hinge of size 100mm (weight not less than 80 Gram), Cold Rolled and fixed, complete all as specified and as directed Engineer-in-Charge.

S&F Steel rolling shutter ( thickness of lath 1.25 mm) without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified and as directed Engineer-in-Charge.

S&F Extruded Aluminium alloy Handle 150mm long (weight not less than 120 Gram), Fabricated type, anodised, complete all as specified and as directed Engineer-in-Charge.

Supply only Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Square Metre in Each Pane, complete all as specified and as directed Engineer-in-Charge (Labour element is also included in item No 22 above).

S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Square Metre in Each Pane, complete all as specified and as directed Engineer-in-Charge.

M&L for TMT Bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia or securing with Clips, complete all as specified and as directed Engineer-in-Charge.

All as per Item No 32 , but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed Engineer-in-Charge.

S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS . S 1161-1979 grade St-240 complete all as specified and as directed Engineer-in-Charge.

M&L Rendering 15mm thick in Cement mortar 1:4 on Brick Walls or on Concrete Surfaces of RCC over head tank 25 meter height , mixing WPC as per manufacturers instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed Engineer-in-Charge. NOTE: WPC will be Measured and Paid under appropriate Item.

M&L for Cement Concrete 1:4:8 (40mm graded crushed stone aggregate) 100mm thick in Sub-bases, complete all as specified and as directed Engineer-in-Charge.

M&L for preparing old Decorated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed Engineer-in-Charge.

M&L for Cement Concrete 1:2:4 (20mm graded crushed stone aggregate) 40mm thick as in Path/ Hardstanding, laid in alternate Bay/Panel, finishing Cement Concrete surface Even and Smooth without using Extra Cement, complete all as specified and as directed Engineer-in-Charge.

M&L for Machine Cut Kota Stone Slab 20-25mm thick in Flooring over and including Cement Screed 15mm thick in Cement Mortar 1:6, laid and jointed with Grey Cement Slurry mixed with Pigment to match the Shade of the Slab including Rubbing and Polishing, complete all as specified and as directed Engineer-in-Charge. NOTE : Cost of Screed Bed will deem to be included in the Quoted Unit Rate.

M&L for Machine Cut Kota Stone Slab 20-25mm thick in Riser of Steps, Skirting, Dado and Pillar, laid over and including Cement Screed 10mm thick in Cement Mortar 1:4, laid and jointed with Grey Cement Slurry mixed with Pigment to match the Shade of the Slab including Rubbing and Polishing, complete all as specified and as directed Engineer-in-Charge. NOTE : Cost of Screed Bed will deem to be included in the Quoted Unit Rate.

M&L for Machine Pressed Pre-cast Concrete Interlocking Polished Paver Block 60mm thick of M-35 Grade, with Grey Cement and Pigment of any shape and size (as ordered), conforming IS-15658-2006, ISI Marked, laid dry over Clean dry Sand and grouted with Clean dry Sand as in Floors, complete all as specified and as directed Engineer-in-Charge. NOTE : Clean dry Sand will be Measured and Paid separately under appropriate Item.

M&L for Sand filling under paver block and consolidation, complete all as specified and as directed Engineer-in-Charge.

M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed Engineer-in-Charge.

M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceilings, Plastered Surfaces finished fair and Even, complete all as specified and as directed Engineer-in-Charge.

M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed Engineer-in-Charge. NOTE: WPC will be Measured and Paid under appropriate Item.

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed Engineer-in-Charge.

Supply only Integral Water Proofing Compound, ISI Marked, as approved, complete all as specified and as directed Engineer-in-Charge.

M&L for preparing newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed Engineer-in-Charge.

M&L for preparing old Plastered Surfaces of Ceiling and applying a Two Coat of White Wash, complete all as specified and as directed Engineer-in-Charge.

M&L for preparing newly Plastered Surfaces of Walls by applying Wall Care Putty including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed Engineer-in-Charge.

M&L for preparing old Decorated/Treated Plastered Surfaces of Walls including Filling the existing Nails/Screw Holes etc and applying One Coat of Distemper Oil Emulsion (as approved), complete all as specified and as directed Engineer-in-Charge.

M&L for preparing newly Plastered Surfaces of Walls by applying Wall Putty, cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Weather Coat Exterior Paint (in Camuflage pattern) with approved Tint over a coat of Primer (as per Manu-facturer's instructions), complete all as specified and as directed Engineer-in-Charge.

M&L for preparing newly Rough Cast Plastered Surfaces of Walls and applying Two Coats of Weather Coat Exterior Paint (in Camuflage pattern)with approved Tint over a coat of Primer (as per Manu-facturer's instructions), complete all as specified and as directed Engineer-in-Charge.

M&L for preparing old Decorated/Painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed Engineer-in-Charge.

M&L for complete removing existing wall surface treatment & finishes including cornices etc and applying Two Coats of Weather Coat Exterior Paint (in Camuflage pattern as per Manu-facturer's instructions), complete all as specified and as directed Engineer-in-Charge. NOTE: Work shall be executed at a height of 25 Meter from ground level.

M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed Engineer-in-Charge.

M&L for Cement Concrete 1:3:6, type C-1 (20mm crushed stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and as directed Engineer-in-Charge.

Ajay Enterprises

VIVEK CONSTRUCTION CO

BS BUILDERS

M/s Har Nandi Construction Company

Aman Enterprises