REPAIR TO MANGLORE TILES ROOF SHEET FALSE CEILING DOORS WINDOWS AND RELATED WORKS IN MD ACCN AT MILIT GIRINAGAR PUNE 25

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets complete all as specified and as directed.

S&F of mineral fibre acoustic suspended ceiling system with prima fine fissured tile with semi concealed grid, the tile should have humidity resistance (RH) of 99%, NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part6 &7) in module sizeof 600mm x 600mm x 16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled content of 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The 'T' sections shall have galvanising of 120 gms/sqm and passed through 500 hrs of salt test all as per manufacutrer's instructions complete all as specified and as directed.

M&L for Anodised aluminium snap grid frame work of size 605mm X 605 mm for false ceiling Complete all as specified and as directed.

M&L for 12 mm thick perforated particle board/tiles for insulation and accoustic purposes, 60cm x 60cm in size fixed with nails to timber frame work or with staples on snap grid including 4 mm dia. GI mild steel plain wire complete all as specified and directed.

S&F wall panelling on existing wall surface consisting 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification to be fixed on wall by self tapping screw of size 19mm x 6mm after putting rawal plugs. The edge and periphery finally to be covered by extruded PVC corner angles beading/fillet complete all as specified and as directed by Engr-in-Charge.

S & F 5 mm thick PVC sheet fillet /beading of width 35 mm for wall panelling inclusive of fixing on wall to make PVC frame as per manufacturer's instructions and all as specified and directed.

S&F 12mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets,etc fixed with screw including 3mm thick, 1st class HW(TW) beading all around on edging to timber frame work all as specified and directed by Engr-in-Charge.

S&F 18/19 mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets,etc fixed with screw including 3mm thick, 1st class HW(TW) beading all around on edging to timber frame work all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S&F 0.63mm thick galvanised,corrugated mild steel sheeting (having 275 gms zinc coating per Sqm of Sheet area) with two corrugation side lap, fixed with L-type or J- type or cranked hook bolts and washers, in roofs, walls etc all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws all as specified and directed.

S&F in repairs Stainless steel fancy chromium plated 25mm dia as in curtain rods including fixing with necessary brackets to palemet box all as specified and directed.

S&F Stainless steel chromium plated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc. complete all as specified and directed.

S&F in repairs readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make:Easy dry or equivalent and approved by EIC.

Repair to existing aluminium door/Window by replacing of rubber beading, aluminium beading, screws, replacement / refixing of glass and other accessories like door closer, hinges as reqd and making door functional incl taking down if reqd and reassemble door complete all as specified and directed. Note- Door closer, floor spring, glass panes will be measured & paid separately.

Taking down steel door/window shutter of any size and welded direction and refixing with provn of projection type hinges nos each welded each shuttes leaf and including making functional for easy opening and closing complete all as specified and directed.

Taking down wooden door/window shutter of any size and resecuring or easing and adjusting without taking down and including making functional for easy opening and closing complete all as specified and directed.

S&F 5.50 mm thick plain/tinted glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden or aluminium frame in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F in repairs for door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n exc. 2 Sqm each complete all as specified and as directed.

Taking down shutters from the frame of any description not exc 1 sqm each leaf and removing from site complete all as specified and as directed.

Supply and fix for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fix for aluminium powder coated louvered ventilator with space for provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034, Glazing clips - 4407

Supply and fix for fully glazed single/ double leaf openable door, using ‘Jindal ' aluminium powder coated sections on door floor spring, pivots, with 5 mm thick glass in panels fixed with aluminium glazing clips section No. 19381 and 19352 and PVC rubber beading all around including with 1” interlock and handle, two lever door lock, sliding wheel complete all as specified and as directed. Jindal section Nos : Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602) Complete all as specified and as directed

Supply and fix aluminium (powder coated ) three track sliding window comprising of one set of fly proof shutter and two set of glazed shutter with frames of size 92.00mm x31.75mm x 1.50mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement all as specified and directed. Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint and including taking down existing window. Make of Aluminium Sections powder coated : Jindal or equivalent in specified makes.

M& L for Silicon sealant for sealing of existing/new window aluminium frame with penetration depth 10 mm and 10 mm wide using sealant gun finished in triangular shape complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round all as specified and directed.

S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples or wooden fillet complete incl fillets for securing wiremesh all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F stainless steel butt hinges, of size 100 mm complete all as specified and directed.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F in repair Brass Mortice lock 4 lever, vertical type, size 100 mm incl plates and two keys suitable for all doors complete all as specified and directed.

S& F in repairs 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specified and as directed.

S&F in repairs floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Dismantling of single layer mangalore tiles roofing including ridges complete all as specified and as directed.

Dismantling the battens of any size incl tiling fillets spaced exc 15cm c/c complete all as specified and as directed.

M&L for second class hard wood clean sawn battens at 30cm centers to center, sectional area exc 5 & n exc 15 Sqcm complete all as specified and as directed.

All as per Item No.47 above but fixing only complete all as specified and as directed.

Material and labour for 2nd class hard wood, clean sawn, in scantling timber work including dismantling work etc all as specified and as directed.

All as per serial item No.49 here-in-before but except timber complete all as specified and as directed.

M&L for preparation of surfaces of wood and wood based material new or old of any description and girth and treated with creosote oil etc complete all as specified and as directed.

Material and labour for preparation of battens, any size and spacing , old/new and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and as directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

Laying only mangalore pattern tiles (obtained from taking down) complete all as specified and as directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed.

Laying only ridge or hip type Mangalore pattern tiles (obtained from taking down) bedded and jointed in cement mortar 1:6 complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as directed.

M&L Fibre board Eves/ Weather Boarding 12 to 20mm thick or Feather Edged 15mm to 20mm thick and fixed with 30mm Lap, complete as approved arch pattern any size and shape including taking down existing boarding including necessary scaffolding required for maintance work, safety measures etc complete all as specified and directed. Make : V-Board(Visaka Industries Ltd) / Everest / Charminar / Ramco as approved.

Dismentling wrought iron or mild steel work of such as grill/roof purlin etc not otherwise provided for complete all as specified & directed.

S&F rolled mild steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc.,conf to Fe 410-W (Gde-E-250) quality 'B'. complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and as directed.

M&L for applying 2 coats of synthetic enamel paint over a coat of red oxied primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and as directed.

Demolition of cement concrete of any description and in any position, provided for complete all as directed.

M&L cement concrete in foundation type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in filling and mass concrete complete all as specified and as directed.

Supply and fix in repair for polycarbonate fibreglass reinforced plastic (FRP ) translucent corrugated/ Plain sheeting 6.00 mm thick fixed with coach screw and washer in roof, wall etc. weather resistant, made from fine anti UV film and resins complete all as specified and as directed by Engr-in-Charge.

Welding in repairs n.exc.2.5 CM in length and thickness of metal/steel n.exc. 6mm complete all as specified and as directed.

Pratap enterprises (BID ID -3107767)

OM GANESH CONSTRUCTION (BID ID -3107973)

sagar construction (BID ID -3122002)