REPAIRS TO JOINERY, ROOF SHEETS, GI, SANITARY FITTINGS AND MISC B/R WORK OF CERTAIN UNITS OF NAGPUR AREA UNDER GE KAMPTEE

Amount

Taking down chowkat with shutter (Without taking of shutter from frame) area exc 1.50 Sqm but nexc 4.00 Sqm each complete all as specified and directed.

Taking down chowkat with shutter (Without taking of shutter from frame) area not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkat with shutter (Without taking of shutter from frame) area not exc 1.50 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition etc complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section frame work under 40 sq. cm in section in any position complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (Using 20mm graded stone aggregate) as in block for hold fast block or similar work and finished the surface with existing and including form work complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-410-0 or 310-0 complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making hold fast and fixing in concrete (1:3:6) type CI including tie bars of 10 mm dia and hold fast of flat iron 40 X 5 mm all complete confirming to Fe 290 (Gde E-165) complete all as specified and directed.

S&F 35mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12mm thick veneered particle board or 9mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure freated of any number of panel complete all as specified and directed.

S&F 2nd class hard wood 35mm thickness Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat molded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F ECO-4000 series pre-coated double rebated openable windows or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyster paint12-16mm microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyster powder upto 50-60 microns thick outer frame section 72x55mm, centre mullion section 72x50mm, shutter section 47 x 20mm, fly mesh section 40x20mm and the fxed glass beading section 12x12mm outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20mm provn for guard bars/grills, the section cut to length miter joints with corner brackets, centre mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and stainless steel(304 grade) mesh for fly mesh shutter fixed with EPDM gasket incl fixing windows with concrete/ stone or brick masonry wall by means of self expanding sleeves and driving MS electroplated 80mm long bolt into the sleeve through frame (minimum 4 Nos fro 1600 mm high windows, 3 nos for 1200mm or less windows and 2 Nos in ventilators), incl 10 mm Square bars welded to 6 x 12mm flat at a distance 125mm c/c etc complete all as specified and directed. Make:- SECCOLAR of NCL ALLTEK & SECCOLAR Ltd, Hyderabad and M/s Ashwani & Sons, Ghaziabad.

S&F aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's specifications complete all as specified and directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item. (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples. (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/ tint. (Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL).

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F GI water tubing medium grade 15mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F GI water tubing medium grade 20mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size 36x24x10 inch complete with fixing arrangement complete all as specified and directed. Make:- Prayag / Hindustan / Nirali / Bluestar/ Shakti.

S&F in repairs 15 mm bore chromium plated Bib cock with flange, complete all as specified and directed. Make:- Prayag CAT No.: 8306.

S&F in repairs 15mm bore chromium plated Bib cock Long body with flange, complete all as specified and directed. Make:- Prayag CAT No.: 8308.

S&F in repairs wall mixer with L bend (Provision for overhead shower) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.Make:- Prayag CAT No.: PIS- 75.

S&F in repairs health faucet with 1 mtr tube and hook complete all as specified and directed. Make:- Prayag CAT No. BEA-96.

S&F in repairs glass shelf 500x 60x 6mm (with ABS brackets) complete all as specified and directed. Make- Prayag CAT No.BEA-47.

S&F in repairs corner glass shelf 300mm (with ABS brackets) 300 x 600mm complete all as specified and directed. Make:- Prayag CAT No BEA-46.

S&F in repairs soap dish complete all as specified and directed. Make:- Prayag CAT No. BEA-45.

S&F in repair Prayag wall cabinet Mirror (500x400Appx) complete all as specified and directed. Make- Prayag CAT No. 556.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

S&F sheet glass ordinary quality 3mm thick quality with oil putty in sequence not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane in each pane complete all as specified and directed.

S&F mild steel medium weight cold rolled 100mm size butt hinges complete all as specified and directed.

S&F mild steel medium weight cold rolled 75mm size butt hinges complete all as specified and directed.

S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm long Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F aluminiumm alloy, anodised sliding door bolt 300mm with hasp, staple (bolt type) and fixed clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F for 150mm long aluminum handles, cast type, anodized complete all as specified and directed.

S&F for 100mm long brass handles, cast type, polished bright complete all as specified and directed.

S&F Hasp and staple, aluminum anodized 75mm long including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for second class hard-wood plain fillets square, rectangular or triangular in sectionexc 13cm and not exc 25 sqcm sectional area, clean sawn, secured with nails or brads in cupboard and similar work etc complete all as specified and directed.

M&L for 12mm thick plywood, grade BWR, type BB fixed with screws to timber frame work with beading as required complete all as specified and directed.

M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L for 2nd class hardwood plain fillets square rectangular or triangular in section, clean swan, secured with nails or brads sectional area not exc 3 Sqcm complete all as specified and directed.

S&F anodised aluminium frame for door, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, side hung type/ Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L for 9mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified and directed.

S&F 4.8 mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed.

S&F grills and gratings etc framed angle iron and ms sheets etc and guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and milar work confirming to FE 290 Gde E165 complete all as specified and directed.

S&F wire brush with aluminium section 25mm x 1 mm and brooms to fill the gap of floor and door shutter complete all as specified and directed.

S&F in repairs solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site with necessary L&T PVC beading on PVC frame as per specifications complete all as specified and directed.

S&F 5 to 7mm hollow, PVC false ceiling decoratie type fixing at site with GI grid frame work as per manufacture instruction complete all as sepcified.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets etc complete all as specified and directed.

S&F in repairs braket brass chromium plated for fixing of Harrison rails, mild steel, chromium plated complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide priming coat complete all as specified and directed.

Dismantling of unserviceable floor, hearth or wall tiling incld cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.58,780.00]

S D WAGHAMSHI

Shri Mohan Brother

AK CONSTRUCTION

khushal constructions

M/S L M Chourasia

DEESHA CONSTRUCTIONS

Bidder Name

S D WAGHAMSHI

M/S L M Chourasia

DEESHA CONSTRUCTIONS

khushal constructions

M/s Rahul Traders

Shri Mohan Brother

AK CONSTRUCTION