SPECIAL REPAIR TO BUILDING NO 131A (FUNCTIONAL HALL AND TECHNICAL LIBRARY) AT CQA (W) JABALPUR UNDER GE (P) NO 1 JABALPUR

Amount

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets including ridges in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof and north light covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted plain galvalume aluminium zinc coating GI based steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof ridge vering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for including removing the dismantlrd material off the site complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe410-W(GDE-E-250) quality-A complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces including priming with red oxide, zinc chrome and applying two coat of synthetic enamel paint on surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

M&L for preparation of old painted steel surfaces applying one coat of synthetic enamel paint on surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar complete all as specified and directed.

M&L for Brick work with sub class 'B' Bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

All as per item srl No 12 here-in-before but except bricks complete all as specified and directed.

M&L for rendering 15mm thick on brick masonry surfaces on fair face of brick work in CM (1:6) finished even and smooth complete without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on other than fair face of brick work and finished plastered surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on wire netting other than fair face over craks of brick work finished even and smooth without using extra cement complete all as specified and directed. Note : Wiremess shall be mearured and paid seperately.

S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc including all laps, cutting and waste complete all as specified and directed.

M&L for preparing new decorated wall surfaces including cornices, plasters etc, and applying two coat of oil bound distemper over a coat of 2 mm thick wall care putty on wall surfaces complete all as specified and directed.

Preparing of new plaster surfaces and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing old decorated wall surfaces including cornices, plasters etc, and applying one coat of oil bound distemper (oil emulsion) on wall surfaces complete all as specified and directed.

M&L for preparing old decorated wall surfaces including cornices, plasters etc, and applying one coat of cement base paint on wall surfaces complete all as specified and directed.

Taking down chowkhat or frame with shutters without taking off shutters from the frame exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkat or frames without taking off shutter from the frame n.exc 1.5 Sqm each complete all as specified and directed.

S&F factory made single extruded WPC solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 calcium carbonate and natural fibers and non toxic additives(maximum toxicity index of 12 fir 100gms) having minimum density of 650 kg/cum and screw withdrawl strength of 1800N(face) & 900n (Edge) minimum compressive strength 50n/mm2,modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire redardant and fixing with stainless steel butt hinges of requried size with necessary full body threaded star headed counter sunk ss screws all as per direction of Engr-in-Charge complete all as specified and directed.

S&F Factory made box Steel windows with side hung shutters including all box type hinges fitting accessories i.e. Tower boilt, hinges, steel handle, and steel peg stay, complete with glazing bars and necessary fittings/fixtures etc complete all as specified and directed.

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Aluminium (Die cast ) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised Aluminium door shutters, aluminium sectiong weighing 0.55kg/m including necessary joininting clets, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading screws etc complete all as specified and directed.

S&F Anodised aluminium window and ventilataors shutters, side hung type without sash bars, aluminium sections wighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long(1 Nos) hinges type B-21 100mm long (2 Nos) suitable hadle (1 Nos) including 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 12mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 100mm complete all as specified and directed.

S&F 105 x 60mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.

S&F aluminium anodized handles 150mm long cast type complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolt & sliding bolts of extruded section of or cast aluminum alloy and fixed 300 mm long complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor two legged over all length of cover plate 140 mm complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floors and paving n.exc 15cm thick above or below ground level complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 20mm graded crushed stone aggregate as in floors plinth protection/paths etc 75mm thick finished even & smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 12.5 mm graded crushed stone aggregate as in copping, filling gaps between roof sheeting and wall etc complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulations, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid) exposed suspended system of grid section size 600mm x 600mm comprising of GI powder coated main 39mm x 24mm x 0.80mm thick (thickness comprising of GI / 0.40 + PPPCGS / 0.30) cross Tee 29mm x 24mm x 0.80mm thick and wall angle 22.2mm x 22.2mm x 0.65mm thick with and including 6mm thick HPSC (High pressure steam cured) pre-primed self imposed fixtured designer board to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash fasteners from purlins of the roof with clips with provn of light fixture complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixxing on to wall to make PVC frame as per specifiecation complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 75mm thick Cement concrete type D-2, 1:4:8 using (40mm graded crushed stone aggregate) as in floor complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in floor complete all as specified and directed.

M&L coloured non skid Ceramic colour tiles 7mm to 8mm thick (square/rectangular) area of each tiles exc 0.18 Sqm but n.exc 0.38 Sqm in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Glazed coloured ceramic tiles in vertical surfaces 350 x 250 x 7 mm/ 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for chequered cement concrete chequered tiles pre polished 20cm x 20cm x 25mm thick set jointed and pointed in neat cement slurry in floors with grey ceemnt and pigment including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking up or down of 15 mm dia bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

Taking up or down of 20 mm dia bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

S&F in repair GI tubing 15 mm dia bore medgrade incl cutting chasing complete in wall complete all as specified and directed.

S&F in repair GI tubing 20 mm dia bore medgrade incl cutting chasing complete in wall complete all as specified and directed.

S&F in repairs Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair fancy type chromium plated bibtap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Gun metal globe or gate galves with iron wheel head, screwed both ends for iron pipe and fixed 20mm dia pipes etc complete all as specified and directed.

S&F in repair 15mm dia bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to WHB complete all as specified and directed.

S&F PVC connection both end brass union and length 450 mm long for 15 mm bore pipe complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan ( pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe with flat bottom and mild steel chromium plated or aluminised hinging device with platic watercloset seat cover white closed pattern complete all as specified and directed.

S&F in repairs vitreous China WHB white flat back size of 630 x 450mm excluding taps waste chain and plug and porcelien stopper but including brakets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

M&L fixed in repairs 32mm dia waste fittings brass chromium plated for glazed ware sinks basins etc., with long screwed shanks and fly nuts flange and bedded in red lead cement and othe end complete all as specified and directed.

S&F in repairs PVC grating doom with waste hole 125mm size of PTMT dia fixed (minimum weight 100gms) complete all as specified and directed.

S&F fixed in repairs CP Tubular Towel rail 20mm dia D type 60cm long between flanges including brakets complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends with access door any radius complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends with access door any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap plain with grating including jointing with slovent cement complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including taking down complete all as directed

S&F in repair PVC valveless, syphonic action type, flushing cistern 10 Ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe complete all as specified and directed.

S&F in repair 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

Dismantling water tanks of capacity exc 500 Ltrs and n.exc 1000 Ltr and removing to store complete all as specified and directed.

S&F 500 ltrs Rational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed position complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed.

Taking down sub main wiring any size of two single core aluminium/copper conductor cable PVC insulated alongwith/without conduit and accessories and removing from site, making good the disturbed surfaces of wall and floor/ceiling etc complete all as specified and directed.

Taking down main switch/DB’s including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, FRLS, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through and including concealed PVC rigid non metalic conduit of size 19 mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLS, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc complete all as specified and directed. Note :- (i) Cost for cutting, chases and concealing the conduit pipe in existing wall shall deemed to be included in the item rate quoted. (ii) Conduit will not be concealed in ceiling but fixed on ceiling surface only.

One 5 Amps light point/fan point controlled by one switch complete all as specified and directed.

One switch socket combination out let 5 Amps on independent board complete all as specified and directed.

One socket out let 5 Amps on the same board with other switches complete all as specified and directed.

All as per item No 85 here-in-before but with 2.5 sqmm copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and directed.

M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 6 Sqmm in and including/drawing through through rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth complete all as specified and directed. Note :- 2 x 6 Sqmm conductor cable, 1 x 6 Sqmm conductor earth continuity cable & PVC conduit shall be measured as one unit length.

M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 4 Sqmm in and including/drawing through through rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 4 Sqmm connected common earth complete all as specified and directed. Note :- 2 x 4 Sqmm conductor cable, 1 x 4 Sqmm conductor earth continuity cable & PVC conduit shall be measured as one unit length.

S&F modular switch piano flush type 230/ 250 volts, 6 Amps, 1 module, single pole, one way complete all as specified and directed.

S&F modular socket out let multi purpose 2 in 1, 2/3 pin, 6 Amps, flush type, ISI marked complete all as specified and directed.

S&F switch 16 Amps, flush type, ISI marked complete all as specified and directed.

S&F socket 2/3 pin combined, 6/16 Amps, flush type, ISI marked complete all as specified and directed.

S&F modular MCB protected socket, sheet metal enclosures for SPN with two pin and earth plug and socket with one single pole MCB 20/25 Amps complete all as specified and directed.

S&F moudular flush type metal boxes of 3 module with brass screw cup washers complete all as specified and directed.

S&F moudular flush type metal boxes of 6 module with brass screw cup washer complete all as specified and directed.

S&F moudular flush type metal boxes of 12 module with brass screw cup washer complete all as specified and directed.

S&F moudular flush type metal boxes of 18 module with brass screw cup washer complete all as specified and directed.

S&F moudular cover plate with grid frame of 3 module, suitable for fix switches, sockets and fan regulator complete all as specified and directed.

S&F moudular cover plate with grid frame of 6 module suitable for fixing modular switches, sockets and fan regulator complete all as specified and directed.directed.

S&F moudular cover plate with grid frame of 12 module suitable for fixing modular switches, sockets and fan regulator complete all as specified and directed.

S&F moudular cover plate with grid frame of 18 module suitable for fixing modular switches, sockets and fan regulator complete all as specified and directed.

S&F ceiling rose surface bakelite, three terminal complete all as specified and directed.

S&F LED lamp 9W LED bulb, 230 V with angle holder and making proper connection complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F high efficiency recessed mounted 36 W LED (cool day light/natural day light) luminaire light fitting as per site requirement, with 120 lumen/watt output, opal diffuser, 230 V with all connected accessories, prewired with 3 core flexible wire of size 1.5 sqmm, Size 595 x 595 mm connecting and testing ccomplete all as specified and directed.

S&F in repairs LED street light fittings not less than 30 watts, 230 Volts, with high quality lenses & reflector, High grade aluminium pressure Die-Cast Housing with toughened glass cover, IP-65 class of protection, complete with control gear and all accessories fixed with 25 mm bore Light grade GI Pipe Bracket 1.2 mtr long bent to shape, fixed on wall with MS Flat Clamps, nuts & Bolts as required complete all as specified and directed.

S&F modular stepped type electronic fan regulator flush type, two module on the existing phenolic laminated etc as required, single pole, 240 volts, grade 350 watts, heavy duty and ISI marked complete all as specified and directed.

Taking down existing ceilling fan/ exhaust fan/ wall fan of any size, cleaning, oiling, gresing and refixing its orignal position including replacing of check nut, bolt and quarter pin etc complete all as specified and directed.

Supply and hanging of ceiling fan, BEE 5 star (ES-50) rated high speed 1200 mm sweep complete with blades, downrods, and all accessories as required and provision of 3 core flexible copper conductor cable of suitable size and connecting up from existing ceiling rose to fan complete all as specified and directed.

S&F exhaust fan, plastic body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply, installation, commissioing and testing of heavy duty desert cooler electric driven (single phase), having nominal air flow capacity of 4000 Cfm per hour (or nearest size) (plastic/PVC body) including MS angle mounting stand of required size, complete all as specified and directed. Make:- Crompton (Model - GALEDAC60) or equivalent make in Bajaj/Havells.

S&F Sheet metal enclosure for DBs when MCBs to be used, 4 way, TP & N, double door type, 440 Volt with 200 Amps rated busbar suitable for MCCB 63 Amps, 4 pole incomer complete all as specified and directed. Note : MCBs shall be measured separately.

S&F Sheet metal enclosure for DBs when MCBs to be used, 8 way, SPN, double door type, 240 Volt with 200 Amps rated busbar complete all as specified and directed. Note : MCBs shall be measured separately.

S&F Sheet metal enclosure for DBs when MCBs to be used, 4 way, SPN, double door type, 240 Volt with 200 Amps rated busbar complete all as specified and directed. Note : MCBs shall be measured separately.

S&F MCCB, four pole, 63 Amps, 415 Volt, of breaking capacity 16 KA complete all as specified and directed.

S&F MCB, SPN, 240 volts, 32 Amps capacity, 'C' series complete all as specified and directed.

S&F MCB, SP, 240 volts, 5 to 32 Amps capacity, 'C' series complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron earth wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade crushed stone aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade crushed stone aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note :- GI earth wire 4.00mm dia and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Schedule of credit amount of Rs. 99,922 to be deducted during AOC.

RP ANAND

RADHEY CONSTRUCTION