Construction of boiler room at inspection hut PWD Leh.(SDP)

Amount

Earth work in excavation by manual means over areas(Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Including carriage complete job.

Random Rubble masonry with hard stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) Including carriage complete job.

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Including carriage complete job.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) Including carriage complete job.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. Including carriage complete job.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Centring and shuttermg including strutting, propping etc. and removal of form for. a ) Lintels, beams, plinth beams, girders,bressumers and centilevers.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. First class kail wood .

12 mm thick plain grade - 1 , medium density flat pressed three layer particle borad FPT - 1 or graded wood particle borad FPT- 1 IS: 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 60% of item 10 .Including carriage complete job.

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) Including carriage complete job.

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10 mm nominal size dashed over and including in 1: 4 grade . Including carriage complete job.

Steel work in built up tubular round , square or rectangular including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc . Complete . Hot finished seamless types tubes ( 80mm x 40 mm x 2.9mm )

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.1.00mm thick with zinc coating not less than 27 5gm/m2

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate.Including carriage complete job.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Finishing wall with water proofing cement paint of required shade on new work ( two or more)

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

French spirit polishing with Two or more coats on new works including a coat of wood filler

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 150x10 mm

Providing and fixing brass handle with necessary screw complete job. ( 125mm )

M/S STANZIN NAMGAIL